You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment. Full Range Travel: Lift and drop leg combine for wide height adjustment on any terrain.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place.
This JXC A-frame trailerjack features a manual hand crank, but can also be powered by any 18-volt to 24-volt compact drill when using the included attachment. ... Features: Utility jack lets you raise and lower your A-frame trailer Drill power option Compatible with any 18-volt to 24-volt drill using the included drill attachment Footplate minimizes sinking in soft ground Patented gear material composition delivers maximum efficiency while reducing heat retention Wrinkle black powder coat offers weather resistance Specs: Bracket height: Retracted: 9-1/2" Extended: 23-1/2" Travel: 14" Clearance: 13-1/2" from mounting bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: Manual: 1,600 lbs With drill: 800 lbs Support capacity: With footplate: 5,000 lbs With wheel: 1,200 lbs Jack height adjustment range: 23" - 37" Gear ratio: 12:16 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Trailer Valet drill powered direct weld trailerjack is rated for 10,000 lbs static load, providing manual or drill operation to raise or lower a trailer with reduced effort.Features: Dual operation with manual hand crank and compatibility with standard 18 to 24 V drills using a drill attachment Direct weld mount designed for permanent attachment to the trailer frame Patented gear system engineered for efficient operation Weather resistant finish for protection against corrosion Includes footplate or base plate for additional stability Specs: Static load capacity: 10,000 lbs Mount style: Direct weld Total height adjustment: 27-7/8" Screw travel: 14-1/2" Drop leg travel: 13-3/8" in 3-3/8" increments Total retracted height: 25-1/2" Total extended height: 53-1/2" Outer tube dimensions: 3-3/16" x 3-3/16" Inner tube dimensions: 2-3/4" x 2-3/4" Leg dimensions: 2-3/8" x 2-3/8"
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right TrailerJack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 10,000 lbs fully loaded, your tongue weight will typically be around 1,000 to 1,500 lbs.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right TrailerJack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 6,000 lbs fully loaded, your tongue weight will typically be around 600 to 900 lbs.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 7" Screw tavel and 5" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. ... If the bolts on your jacks are smaller than 3/8", you will need to enlarge the bolt holes prior to installation. Scissor jacks must be mounted at a 90-degree angle from your trailer's frame.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
A failing jack slows everything down. When a leg starts leaking or won't hold a load, it's time for a new one. Weld this replacement on, tie it into your pump, and the trailer is back to working the way you need it to.Heavy-Duty Strength: 8,000-lb capacity handles equipment, livestock, and commercial trailer loads. Square-Tube Stability: Welded structure stands up to repeated lifting on demanding trailers. Permanent Weld-On Mount: Attaches solidly to the frame for long-term use without bolt patterns or adapters.
This trailerjack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. ... Features: Magnets That Stick: Integrated magnets allow the block to instantly attach to your jack, so no fumbling around trying to keep it in place Stackable for More Height: For additional height, you can stack 2 blocks together Recessed Post Hole: Each block features a 2-1/2" recessed post hole, making it compatible with jacks both with and without footplates.
This trailerjack block makes leveling and stabilizing your RV or trailer simple. No more wrestling with wobbly jacks or stacking sketchy wood blocks. ... Features: Magnets That Stick: Integrated magnets allow the block to instantly attach to your jack, so no fumbling around trying to keep it in place Stackable for More Height: For additional height, you can stack 2 blocks together Recessed Post Hole: Each block features a 2-1/2" recessed post hole, making it compatible with jacks both with and without footplates.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... The total lift listed above can help you determine how high this jack will be able to raise your trailer.
Stable, ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel, 5-1/2" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jack crank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Interlocking blocks stack to different heights and can be positioned beneath jacks, stabilizers, or RV wheels to add enough lift to level your rig. Durable polyethylene construction.Features: Stackable blocks provide extra lift to level your trailer or motor home Position beneath jacks, stabilizers, or trailer wheels Interlocking design guarantees no shifting or collapsing once stacked Stack straight up for extra height Stagger blocks to create a ramp so you can easily drive up Durable polyethylene construction Included strap secures blocks together for easy, compact storage Specs: Quantity: 4 Block dimensions: 8-1/8" long x 8-1/8" wide x 1-3/8" tall Including handle: 10" long 1-Year warranty Stackers Blocks and Chock Stackers leveling blocks can be stacked directly on top of each other for supporting a trailer tongue, or you can stagger the blocks to create a ramp.
Filters
