Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.Holds Up to Outdoor Use: E-coat, powder coat, and zinc plating help protect the steel from corrosion. Get Better Footing: Round removable foot plate gives the jack a wider base on gravel, grass, and soft ground.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.And if you ever lose power, the backup crank makes sure you can still finish hooking up and get back on the road. The included foot plate also works with the 6" Round SnapPad Foot, part MN6SP1, if you want a wider base on softer ground. Built for Real Life Rain rolls in and road spray cakes everything underneath your trailer.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.And if you ever lose power, the backup crank makes sure you can still finish hooking up and get back on the road. The included foot plate also works with the 6" Round SnapPad Foot, part MN6SP1, if you want a wider base on softer ground. Built for Real Life Rain rolls in and road spray cakes everything underneath your trailer.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.Swivels Up for Travel: Pivot the jack alongside the trailer frame so it stays out of the way on the road. Holds Up to Outdoor Use: E-coat, powder coat, and zinc plating help protect the steel from corrosion.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right TrailerJack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 10,000 lbs fully loaded, your tongue weight will typically be around 1,000 to 1,500 lbs.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.More Footing on Soft and Uneven Ground Unstable ground turns the front of the trailer into a balancing act when you're trying to park, load, or unhook. The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground.
Use your drill to raise and lower your trailer, then check tongue weight before you tow. This kit pairs a 2,000 lb A-frame jack with a jack foot tongue weight scale so you can adjust cargo and verify the load during setup.Specs Jack Capacity and Lift: Maximum lift capacity: 2,000 lbs Lift: 14" Jack Operation: Sidewind handle 3/4" integrated drill adapter Jack Construction: Outer tube diameter: 2-1/4" Inner tube diameter: 2" E-coat and glossy black powder coated steel outer tube White zinc plated steel inner tube Round removable steel foot plate Tongue Weight Scale: Maximum tongue weight: 2,000 lbs Gauge reads in 50 lb increments Matte black powder coated aluminum body Matte yellow powder coated aluminum base Steel gauge Warranty: Jack: limited lifetime Tongue weight scale: limited lifetime Note: This kit is recommended for A-frame trailerjacks only.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailerjack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.If you want to verify that your vehicle-side connector is supplying proper power, see our help article: Testing a Vehicle Side 7-Way Trailer Connector for Proper Function . Specs Jack Capacity and Lift: Maximum lift capacity: 5,000 lbs Lift: 18" Drop leg adjustment: 9-3/4" in 2" increments Total adjustment: 27-3/4" Jack Motor and Power: 12V electric motor 7-way plug connection Jack Construction: Outer tube diameter: 2-1/4" E-coat and black powder coated steel outer tube White zinc plated steel inner tube Black ABS plastic motor housing Removable solid steel foot plate Tongue Weight Scale: Maximum tongue weight: 2,000 lbs Gauge reads in 50 lb increments Matte black powder coated aluminum body Matte yellow powder coated aluminum base Steel gauge Warranty: Jack: 2-year Tongue weight scale: limited lifetime Note: This kit is recommended for A-frame trailerjacks only.
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good!
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good!
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right TrailerJack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 6,000 lbs fully loaded, your tongue weight will typically be around 600 to 900 lbs.
... Black powder coat and zinc provide rust protection, which is great for boat trailers. Made in the USA.That provides extra surface area, which translates to great stability on pavement and small gravel, and it helps to alleviate sinking in soft ground. Whether you take your trailer off-road, or it never leaves the pavement, this wide wheel has all your bases covered. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
This Dutton-Lainson industrial sidewind jack is a pipe mounted, swivel style jack with a base foot. 11" Lift with 2,000 lbs capacity.Features: Pipe-mounted swivel-style jack lifts the tongue of your trailer Wide baseplate supports the nose of your trailer Includes weld-on mounting tube and detent pin Cranks with a sidewind handle Matte black finish Made in the USA Specs: Capacity: 2,000 lbs Lift: 11" Height: Retracted: 11-1/2" Extended: 22-1/2" Bracket height: 11-1/2" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson industrial sidewind jack is a pipe mounted, swivel style jack with a base foot. 15" Lift with 2,000 lbs capacity.Features: Pipe-mounted swivel-style jack lifts the tongue of your trailer Wide baseplate supports the nose of your trailer Cranks with a sidewind handle Includes weld-on mounting tube and detent pin Matte black finish Made in the USA Specs: Capacity: 2,000 lbs Lift: 15" Overall height: 27" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson industrial topwind jack is a pipe mounted, swivel style jack with a base foot. 15" Lift with 2,000 lbs capacity.Features: Pipe-mounted swivel-style jack lifts the tongue of your trailer Wide baseplate supports the nose of your trailer Cranks with a topwind handle Includes weld-on mounting tube and detent pin Matte black finish Made in the USA Specs: Capacity: 2,000 lbs Lift: 15" Overall height: 24-3/4" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This Dutton-Lainson industrial topwind jack is a pipe mounted, swivel style jack with a base foot. 10" Lift with 2,000 lbs capacity.Features: Pipe-mounted swivel-style jack lifts the tongue of your trailer Wide baseplate supports the nose of your trailer Cranks with a topwind handle Includes weld-on mounting tube and detent pin Matte black finish Made in the USA Specs: Capacity: 2,000 lbs Lift: 10" Overall height: 15-1/2" 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Adds 8" of height to reduce jack strain. Each block holds 6,000 lbs and has a magnetic base that sticks to your jack pad. Stackable, nestable, and stable, this 6-pack is built for full trailer support.Highlights Boosts Jack Height: Adds 8" of height, reducing how far your jack needs to extend. Less Wobble, More Stability: Wide base helps eliminate sway while parked.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailerjack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Specs Jack Motor and Power: 12V electric motor Direct wire to 12V power source 20A automatic reset relay fuse Jack Capacity and Lift: Maximum lift capacity: 5,000 lbs Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Jack Height: Overall height: 29-1/2" Mounting plate height: 8-7/8" Jack Construction: Outer tube diameter: 2-1/4" Black powder coated steel Tongue Weight Scale: Maximum tongue weight: 2,000 lbs Gauge reads in 50 lb increments Matte black powder coated aluminum body Matte yellow powder coated aluminum base Steel gauge Warranty: Jack: 2-Year Tongue weight scale: Limited lifetime Note: This kit is recommended for A-frame trailerjacks only.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailerjack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.The included tongue weight scale fits most A-frame trailerjacks with a 2" diameter inner tube and an interchangeable foot.
Perfect for heavy-duty marine and other off-the-beaten-path trailer applications, this rugged-looking swivel jack has an extra-wide wheel for great stability and turns 360 degrees to make it easy to maneuver your trailer. ... That provides extra surface area, which translates to great stability on pavement and small gravel, and it helps to alleviate sinking in soft ground. Whether you take your trailer off-road, or it never leaves the pavement, this wide wheel has all your bases covered. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Perfect for marine and other off-the-beaten-path applications, this rugged-looking square swivel jack has an articulating footplate that helps it get a grip on uneven surfaces. Black powder coat and zinc fight rust and corrosion. Made in the USA.So, when it gets scuffed, scratched, or chipped, it shows battle scars, not wounds. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW).
4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. ... Features: Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mount bracket 2-Wire pigtail with power and ground wires Specs: Dimensions: 4" long x 1-9/16" tall x 2-5/8" deep Mounting hole dimensions (center to center): 3-7/16" Bulb type: 194 wedge Power draw at 12.8 volts: 0.2 amps 3-Year warranty License light is a direct replacement for: Uni Bond LP1001 Truck Lite 26336 Grote 60251 Bargman 30-30-002
Filters
