Floats protect your sideboards so you can speed up the time it takes to load and launch without worrying about damaging your boat or personal watercraft. Includes everything you need to install them on your trailer (except tools).Features: Minimizes frustration and speeds up the time it takes to load and launch your boat or personal watercraft Works in cross currents and crosswinds Floats protect your sideboards from damage Bolts to your trailer for easy installation Includes floats, attachment arms, nuts and bolts, trailer plates, and sealant Constructed of injection-molded nylon for durability Made in the USA Specs: Application: trailers for boat or personal watercraft weighing up to 1,500 lbs.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 75-inch-tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. ... The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 75-inch-tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. ... Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp Aluminum posts are lightweight and rustproof White PVC pipes slide over aluminum posts so you can see your submerged trailer Stainless steel hardware secures posts directly to your trailer's I-beam Posts can be adjusted up to 19" away from your trailer Drilling is required Made in the USA Specs: Application: I-beam trailer frames Overall height: 65" PVC pipe diameter: 2-3/8" U-bolt size (center to center): 2" Quantity: 2 boat guide-ons Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 65" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... Features: Bunk-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Boards can be installed higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade-carpeted boards won't scratch your boat Made in the USA Specs: Quantity: 2 bunk-style pontoon boat guides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Bunk board dimensions (each): 24" long x 4" wide x 2" deep Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted at the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Zinc-plated steel U-bolt kit allows you to attach 1 roller-, bunk-, or post-style guide-on to your boat trailer with a frame up to 3" wide x 4" tall. Includes 1 pair of mounting U-bolts and required mounting hardware.Features: Extra-long U-bolts secure 1 bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware included Made in the USA Specs: Fits: trailer frames up to 3" wide x 4" tall Inside dimensions: 5" long x 3-1/2" wide Bolt diameter: 3/8" Quantity: 1 set (2 U-bolts) Included mounting hardware: (4) 3/8"-16 Lock nuts (4) 3/8" Washers
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-4P Yates 12" Molded Side Guide Roller - Black Rubber
This 2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded Side Guide Roller - Black Rubber
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights are installed (second light sold separately) Light Guide Series features a smooth X-shape across the face of the light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts 2-wire pigtail DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 6-1/2" long x 2-3/8" tall x 1-3/4" deep Number of diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.Spins Under Load To Guide Boat Position: Roller spins to guide boat along trailer path. Works With Standard Roller Brackets: Fits 1/2" diameter shaft mounting setups.
This 2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer (sold separately) Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 9" long x 2" diameter
4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. Smooth X-shape crosses the face of the light. Recessed mount with grommet (sold separately). ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. PL-3 Wiring Connection This Light Guide light has a standard 3-prong plug as pictured above. A 3-prong pigtail (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer.
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accomodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accomodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
Dutton-Lainson guide-on roller for boat trailers.Features: Roller made of solid, high grade rubber 2-1/2" Diameter x 12" long guide-on roller Fits 5/8" shaft 21554 Boat TrailerGuide-On Roller, 2-1/2" Diameter x 12"Long Model 6334 by Dutton-Lainson
Filters
