The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road ... : There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged ... Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling ... Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Provides excellent rust protection - great for boat trailers and trailers used in coastal areas or on heavily
The built-in charger in this kit keeps the battery charged and ready to bring your single-axle or tandem axle trailer to a complete stop should it become disconnected from your vehicle. LED tester ... Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailerbrakes to activate Automatically
This universal wiring kit lets you install an electric brake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way ... Features: Universal kit includes wiring and hardware required for installation of a trailerbrake controller (sold separately) Designed for use on a vehicle with an existing 4-way flat trailer
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger ... box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway
Kit with Charger
5 Ah
1 Amp Charger
Top Load
Tandem-Axle
Single-Axle
LED Tester
Bright Way
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with ... Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 4 Disc brake end kits Hub-and-rotor assemblies Grease seals, races and bearings Grease caps (F001526
Whether you're replacing trailerbrakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels ... . If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you. How to Manually Adjust TrailerBrakes The more
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailerbrakes to activate Lead-acid battery
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately ... Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps
Complete single-axle disc brake set offers better performance and increased stopping power for your trailer. Includes 2 hub-and-rotor assemblies, 2 calipers and 2 mounting brackets, all ... (1,000 psi). To achieve this pressure, a brake actuator with a 1,500-psi rating is required. An increasing number of trailer owners are switching over to disc brakes, and with good reason. Disc brake
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease ... Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Bearings
Bring your triple-axle trailer to a stop should it become disconnected from your tow vehicle. Breakaway system includes a built-in charger to maintain the battery so you're always ready for an ... Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailerbrakes to activate Automatically
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits ... Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with ... Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 4 Disc brake end kits Slip-on, cast iron, over-the-hub rotors Calipers with mounting brackets and
Vented, marine-grade aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic disc brakes. Includes wiring, 7-way harness ... breakaway system will activate your trailer's brakes in the unlikely event that your trailer disconnects from your tow vehicle. This kit wires to the included battery and to the Hydrastar actuator. If
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels. what you need for your trailer, you can be pretty sure these will work for you. Automotive-Grade Brake Pads The pads on these trailerbrakes are made of the same friction material that you might find on
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies ... drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you. Self-Adjusting Brakes Don't
Features: Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin EZ Lube spindle washer Outer Bearing Inner Bearing Seal Seal I.D. 14125A 25580 GS-2125DL
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.Features: Brake controller activates trailerbrakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Simple controls
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal ... Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched
Dacromet backing plates fight rust and corrosion resistance. Ideal for boat trailers near saltwater. 10" x 2-1/4" Assemblies have premium brake pads. Fit 13" to 15" wheels.Features: Marine-grade brakes are great for boat and snowmobile trailers Dacromet-coated backing plates offer excellent rust resistance Stainless steel backing plates and springs Aluminum cylinders
Trailer disc brakekit includes 2 assemblies with rust-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 5,200-lb to 6,000-lb axles and 15" and larger wheels ... bolts 5-Bolt brake flange mounting configuration - weld-on flange sold separately Kit includes 2 full brake assemblies 2 Dacromet-plated, cast iron rotors 2 Dacromet-plated, cast iron calipers 2
Rust-resistant disc brakekit is great for boat trailers. Includes 2 KodaGuard-plated calipers; 2 Dacromet-plated, slip-on rotors and brackets; and 4 stainless steel caliper mounting bolts. Fits ... Features: Marine-grade trailerbrake assemblies let you change from an idler axle to a disc brake axle Disc brakes deliver better performance than drum brakes More consistent stopping, even at
Filters
