This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wire adapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
You pull off the trail, ready to make camp, and the sun is blazing. In minutes, this awning swings out and secures to cast 270 degrees of shade and shelter. Now, the crew can kick back and even if the wind and rain roll in, everyone stays covered.Tough Enough for Any Weather: Waterproof and UV-resistant fabric handles scorching sun and unexpected rain like a champ. Packs Down Tight: Rolls up into a rugged case that protects against road grime and debris while you're driving. Features to know about Your Campsite, Covered The OverNOut 270 XL awning easily swings out to cast a wide arc of shade around the passenger's side of your vehicle.
... Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Roll out instant shade wherever you stop. The OutLand awning turns your vehicle into a basecamp with quick solo setup and rugged shelter that stands up to sun, wind, and rain. It's ready for overlanders and vanlifers chasing the next great view.Packable and Protected: Telescoping legs stow in the lead rail and awning tucks into a slim, sturdy case. Lightweight, Yet Built Tough: Sleek aluminum case keeps things light but ready for real-world trips. Ready for Your Roof Rack: Universal adapter mounts to Thule and most aftermarket crossbars with ease.
Want to see your tongue weight at a glance instead of trying to read a tiny dial? Then get ready for this digital scale. We love pretty much everything B&W puts out, so we're really excited to get our hands on this guy too!Protected When You're Done Using It When the job is finished, the scale stores in its weather-tight hard plastic case. It keeps everything protected and easy to grab the next time you want to check tongue weight before a trip. Specs Capacity: Max tongue weight: 4,000 lbs Measurement: Readout: backlit digital display Increment: 5 lbs Accuracy: +/-0.5% Height: Adjustable range: 19-1/2" to 27" Adjustment increment: 1-1/2" Base: Footplate size: 5-1/4" x 8" Power: Battery: 9-volt (included) Compatibility: Coupler size: 2" and larger Storage: Case: weather-tight hard plastic case included
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 3.5K axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 15" wheels.Features: Marine-grade trailer hub assembly fits idler axles Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin Pre-greased idler hub is easy to install - no need to pack bearings Lubricated with heavy-duty grease for marine applications Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion Carrying case with handle keeps all the parts in one place Easy to stow on your trailer in case of an emergency Specs: Application: 3,500-lb axles with #84 spindles Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-7/8" long Grease cap flange diameter: 1.98" Hub flange diameter: 6-1/2" Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
This portable surge protector alerts you instantly of voltage problems and automatically cuts power to your RV when a fault is detected. Built-in Bluetooth and Wi-Fi monitor your system from anywhere around the globe via a smartphone app.Features: 50-Amp surge protector prevents damage to your RV from power spikes and sustained high or low voltage Emergency Power Off cuts connection in the event of an error to protect electronics and appliances Shuts down if current drops below 104V or raises above 132V Also cuts power for an open ground, open neutral, reverse polarity, open circuit, or mis-wired connections Automatically turns back on once power is stable for 90 seconds Free Smartphone app for iOS and Android connects via built-in Bluetooth and Wi-Fi to monitor your system Quickly pair using the QR code on front of device Read volts, amps, and watts in real time to keep an eye on your power draw Get push notification when voltage is outside of acceptable, customizable ranges 4-Second start-up delay gets you up and running faster than other brands Delay makes sure power is safe to use before flowing normally Audible click tells you the surge protector is on Surge protection module offers 4,600 joules of protection in case of lightning strike Can be replaced once it wears out - no need to replace the entire unit Fault history is recorded up to 10 faults Time stamp provides detailed information on shut downs Easy-to-see indicators show you if there's a problem and what that problem is Watchdog logo illuminates white if power is steady and red if there's an error Error code can be compared to legend on the side of the unit Lights can be dimmed via the mobile app Housing is IP65 rated for protection against dust and rain Metal bracket around cord provides secure place to attach cable lock Side entry receptacle and cover relieve stress on the connection Receptacle bay includes an integrated light that can be turned on for nighttime visibility ETL listed Specs: Amps: 50 amps Energy dissipation: 4,600 joules Limited lifetime warranty
You pull off the trail, ready to make camp, and the sun is blazing. In minutes, this awning swings out and secures to cast 270 degrees of shade and shelter. Now, the crew can kick back and even if the wind and rain roll in, everyone stays covered.Tough Enough for Any Weather: Waterproof and UV-resistant fabric handles scorching sun and unexpected rain like a champ. Packs Down Tight: Rolls up into a rugged case that protects against road grime and debris while you're driving. Features to know about Your Campsite, Covered The OverNOut 270 XL awning easily swings out to cast a wide arc of shade around the driver's side of your vehicle.
... Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ford, GM, Chevy, and Nissan Titan XD trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
9" Wide x 72" long x 20-1/2" tall. These sturdy fenders have a flat back to mount flush with your tandem-axle trailer. Aluminum construction is corrosion resistant. Bolt or weld onto your trailer.The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware. If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
... Includes a ball with an easy-to-use lever and ball-bearing locking system, rubber ball cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Dodge Rams Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Lift integrated lever to unlock and remove ball Locks with built-in ball-bearing system Chrome-plated steel is durable and corrosion resistant 2 Safety-chain hookups attach directly to Power Pucks built into gooseneck rails for simple mounting and removal Rubber cover protects ball hole against dirt and debris when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Dimensions of case: 15-3/4" long x 10-3/8" wide x 2-1/2" thick Limited lifetime warranty
... Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ram trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
10-3/4" Wide x 72" long x 20-1/2" tall. These sturdy fenders each have a flat back to mount flush with your tandem-axle trailer. Rugged, steel construction. Bolt or weld onto your trailer.The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware. If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.Lifetime warranty Satisfaction guarantee Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 46-1/2" Charger lead wire length: 17" Battery box dimensions: 5" long x 4" wide x 3-1/4" tall Trailer jack mounting hole diameter: 2-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Hard braking and sudden stops are part of driving. This crash-tested double crate carries 1 to 2 dogs with a removable or angled divider and adjustable depth, so it fits your cargo space and adds protection when the unexpected happens.Highlights Added Protection Just in Case: Crash tested safety design built specifically for vehicle transport. Transport Two Dogs Together: Holds up to 2 dogs with a 99 lbs maximum weight capacity.
Applies your boat trailers free-backing drum brakes. Listen for the click on the eZ-Latch when coupling, and you'll never worry about highballing ever again. Made in the USA with heavy-duty, zinc-plated steel, and other corrosion-resistant parts.Features: Activates your trailer's drum brakes when tow vehicle slows or stops - no brake controller needed EZ-Latch coupler mechanism for simple, secure hookup and disconnect Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place Accommodates a trailer lock to deter would-be thieves Zinc plating offers corrosion resistance 120-Hour salt spray rating Composite master cylinder is durable and efficient Glass-reinforced nylon construction resists rust and corrosion Large reservoir provides increased capacity for brake fluid Automotive-style diaphragm cap creates completely enclosed system to help prevent contamination of fluid Large rear rollers allow for easy movement and smooth operation Breakaway included Includes breakaway cable with snap hook Constructed of heavy-duty steel with sturdy, reinforced outer casing Bolts onto your trailer tongue Hardware not included Made in the USA Specs: Application: trailers with hydraulic drum brakes Designed to fit straight, 3" wide trailer tongue Ball size: 2" Gross towing weight: 7,000 lbs Maximum tongue weight: 700 lbs Mounting: straight, 3" wide trailer tongue Model number: DA70 1-Year warranty Tech Tip: If don't already have brakes that are free-backing, you'll need to get some.
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.Features: Kit lets you replace 1 hub assembly on your trailer Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin Perfect for storing onboard your trailer in case of an emergency Pre-greased with heavy-duty, marine-grade lubricant Ideal for boat trailers Strong, cast iron hub is painted black Double-lip grease seal helps keep moisture out and grease in Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion Carrying case with handle keeps all the parts in one place Made in the USA Specs: Application: 2,700-lb axles Maximum wheel diameter: 14" Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-7/8" long Hub inner diameter: 1.98" Hub flange outer diameter: 5-1/2" Weight capacity: 1,350 lbs Bearing, Race, and Seal Information Bearings (included) Inner and outer bearing: L44649 (1.063" inner diameter) Races (included) Inner and outer race: L44610 Grease seal (included): 12192TB Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
... Includes a ball with an easy-to-use lever and ball-bearing locking system, rubber ball cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Lift integrated lever to unlock and remove ball Locks with built-in ball-bearing system Chrome-plated steel is durable and corrosion resistant 2 Safety-chain hookups attach directly to Power Pucks built into gooseneck rails for simple mounting and removal Rubber cover protects ball hole against dirt and debris when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Specs: Gross towing weight: 38,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 2.5K axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, cap, lug nuts, and cotter pin included. For 8" to 12" wheels.Features: Marine-grade trailer hub assembly fits idler axles Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin Pre-greased idler hub is easy to install - no need to pack bearings Lubricated with heavy-duty grease for marine applications Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion Carrying case with handle keeps all the parts in one place Easy to stow on your trailer in case of an emergency Made in the USA Specs: Application: 2,500-lb axles with BT8 spindles Wheel size: 8" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-7/8" long Grease cap flange diameter: 1.98" Hub flange diameter: 5-9/16" Weight capacity: 1,250 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
72-7/8 x 34-1/4 x 12. Save space in your trunk by hauling extra gear on your crossbars. Rugged cargo box is great for carrying camping supplies, sports equipment, and other items. Easy installation on aero, square, round, and most factory cross bars.
Ready to roll out or set up camp anywhere? This portable panel makes it easy to recharge your batteries wherever you find sun, so you can stay unplugged longer and spend more time doing what you love without needing hookups.Sets Up in Minutes: Kickstand lets you angle the panel for the best sunlight - no tools or mounting needed. Folds for Storage: Packs down into its own case for easy carrying and storage between adventures. Weatherproof and Durable: Strong tempered glass and an aluminum frame are built to handle the outdoors.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.If not, then you'll need to cut those brackets off and weld on the new ones included with the kit. And, just in case you're curious, the distance between the second and the third weld stops is 5-5/8". What to Know Before Installing Dual-Motor Landing Gear There are some benefits to having legs working independently of each other.
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner bearing (L68149) and race, outer bearing (L44649) and race, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.Features: Kit lets you replace 1 hub assembly on your trailer Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin Perfect for storing onboard your trailer in case of an emergency Pre-greased with heavy-duty, marine-grade lubricant Ideal for boat trailers Strong, cast iron hub is painted black Double-lip grease seal helps keep moisture out and grease in Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion Carrying case with handle keeps all the parts in one place Specs: Application: 3,500-lb axles Maximum wheel diameter: 15" Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-7/8" long Hub inner diameter: 1.98" Hub flange outer diameter: 6-1/2" Weight capacity: 1,750 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 171255TB (10-19) Inner diameter: 1.719" Outer diameter: 2.565" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Filters
