Replaces 1 long stabilizingpin for your Stromberg Carlson platform bike rack (BC-202, BC-202BA, BC-204, or BC204-HD). Pin measures 3-1/2" long x 5/8" diameter.Features: Replaces 1 long stabilizingpin for your Stromberg Carlson platform bike rack (BC-202, BC-202BA, BC-204, or BC204-HD) Measures 3-1/2" long x 5/8" diameter Fits: Stromberg Carlson platform bike racks: BC-202, BC-202BA, BC-204, and BC204-HD
Shank fits 2" hitches and offers up to a 13" rise and a 7" drop. System uses optimal points of tension to help prevent sway while it balances your trailer's load for a more level ride. Clamp-on brackets require no drilling.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a level ride for both tow vehicle and trailer Built-in sway control helps to prevent trailer sway Constant tension in trunnions helps force trailer in line Rotating lift brackets ensure that chains are tight and secure to keep spring bars from moving Trunnion spring bars flex for a controlled, even ride Automatically lock in place and easily remove Interchangeable with other Blue Ox spring bars (sold separately) to raise or lower the weight capacity No pins or clips needed - self-locking devices function throughout system Easy-to-operate bracket locks automatically secure rotating brackets in place and release with push of lock pin 2 Grease zerks inside head assembly make maintenance simple and clean Unique, rotating-latch lift brackets connect spring bars to trailer Quick and simple to use - insert lift chain into slot and rotate bracket with wrench Clamp-on design - no drilling needed Required tilt is built into head assembly - no adjustment needed Powder coated steel construction System includes head assembly, adjustable shank, spring bars, lift chains, rotating lift brackets with handles, reducer bushing for ball shank, pin and clip, and all necessary hardware Hitch ball sold separately - requires 1" or 1-1/4" diameter shank Made in the USA Specs: Tongue weight: 1,000 lbs - 1,500 lbs Gross towing weight: 15,000 lbs Application: 2" x 2" Trailer hitch receivers rated for use with weight distribution systems Trailers with frame height between 3" and 6" Lift-bracket positioning: mount about 29" back from hitch ball Shank length: 9" From center of hitch pin hole to center of adjustment holes 10" From center of hitch pin hole to front of shank 8" From center of hitch pin hole to back of shank 13" Overall Total height adjustment along shank: 13-3/4" Maximum rise: 13" Maximum drop: 7" Overall height: 15" Holes are spaced 1-1/4" apart on center Limited lifetime warranty Note: The clamp-on brackets in this system may not work on C-channel trailer frames.
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built-in sway control stops trailer sway before it begins Maintains tension throughout the entire system Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Compatible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Chromoly steel spring bars offer superior dexterity for a controlled, even ride without the bounce Dipped steel construction is durable and corrosion resistant System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Fits: 2-1/2" x 2-1/2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 1,200 lbs - 1,600 lbs Gross towing weight: 16,000 lbs Ball size: 2-5/16" Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 8" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 6" Maximum drop: 3" Overall height: 9-1/2" Holes are spaced 1-1/4" apart on center Spring bar dimensions: 35-1/2" long x 1-1/2" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-1600 Equal-i-zer Weight Distribution Hitch Weight Distribution Shank Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Hitch Pin and Clip Necessary Installation Hardware n/a Thin Walled Socket for Installation of Hitch Ball Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Guard against trailer theft with this durable steel, butterfly-style coupler lock. Works with most ball couplers that have trigger-style latches. Chrome plating resists corrosion. Includes a protective rubber bumper and dust cap.Enhanced security: The advanced cylinder design of the keys is harder to pick, drill, or duplicate, keeping your stuff safe from tampering. Specs: Application: trigger-latch-style ball couplers Inside pin length (span): 7/8"
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip included Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 4" Drop: 5-1/4" Overall length: 13" Center of pin hole to center of ball: 10" Limited 1-year warranty
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip Durable steel with black matte finish Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 3/4" Drop: 2" Overall length: 12-1/2" Center of pin hole to center of ball: 8-1/2" Limited 1-year warranty
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with reverse-angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Cover protects internal components of latch from damage and from the elements Delivers a clean appearance Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide Cover dimensions: 1-5/8" long x 1-3/8" wide 3/4" From center of mounting hole to center of mounting hole horizontally 7/8" From center of mounting hole to center of mounting hole vertically
The 180 hitch has a chrome-plated double-sided tow ball, so switching sizes is a breeze. Tow up to 8,000 lbs with the 2" ball or up to 12,500 lbs with the 2-5/16" ball. Flip the platform out of the way when not in use and save your shins.Features: Ball mount with double sided balls lets you tow trailers with different coupler sizes with ease To switch ball, simply remove pins, flip ball platform, and reinsert pins Locking dual pins secure the ball mount platform to the shank Stowable design lets you store the balls and mounting platform underneath your vehicle Remove dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert dual pins to secure ball mount platform for travel Locking hitch pin keeps your mount securely attached to your vehicle Keyed alike so you only need one key for the hitch pin and dual pin Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included dual pins 6061 T6 billet aluminum shank and mounting platform provide superior strength and durability Solid block construction provides greater strength than the hollow steel of competitors while also maintaining a light weight Rustproof for a clean finish that stands the test of time Chrome-plated steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 12,500 lbs 2" Ball: 8,000 lbs Maximum tongue weight: 1,500 lbs Distance from center of hitch pin hole to center of hitch ball: 8-3/4" Maximum drop: 6" Maximum rise: 7" Incremental height adjustment: 1" Limited lifetime warranty Easily Adjusts to Fit Your Setup Towing trailers with different coupler sizes just got easier thanks to the 180 Hitch 2-ball mount.
Replace the damaged or worn-out corner latch on either side of your utility trailer's gate with this sturdy steel latch. Zinc-plated steel is durable and resists corrosion.Features: Latch replaces the damaged or worn-out latch on the corner of your utility trailer gate Can be installed on the right or left side of your trailer Zinc-plated, 8-gauge steel is durable and resists corrosion Made in the USA Specs: Pin diameter: 1/2" Distance between mounting holes (center to center): 2-1/8"
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately). Round male pin connection.Features: Round brake, tail, and turn signal Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) Round male pin connection DOT compliant Specs: Dimensions: 4-5/16" diameter x 1-13/16" thick Light fits into 4-1/2" diameter hole Diodes: 7 Power draw at 12.8 volts: Stop/turn signal light: 0.234 amps Tail light: 0.033 amps Warranty: Lifetime on LEDs 3-Year limited on housing Male Pin Connection This light has a male pin connection.
Replace the damaged or worn-out side latch on either side of your utility trailer's gate with this sturdy steel latch. Zinc-plated steel is durable and resists corrosion.Features: Latch replaces the damaged or worn-out latch on the side of your utility trailer gate Can be installed on the right or left side of your trailer Zinc-plated, 8-gauge steel is durable and resists corrosion Made in the USA Specs: Pin diameter: 1/2" Distance between mounting holes (center to center): 2-1/8"
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip Specs: Fits: 2" x 2" hitch receivers Ball diameter: 1-7/8" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 3/4" Drop: 2" Overall length: 12-1/2" Center of pin hole to center of ball: 8-1/2" Limited 1-year warranty
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with angled tip provides easy, hands-free latching action Reverse-angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide
You may not tow a lot, but if you hit a crosswind, your trailer will sway. Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Torqued Chrome Hitch Ball Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Bar-Style Friction Sway Control Unit n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
... Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, pintle hook and stabilizer kit included.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
... Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, pintle hook and stabilizer kit included.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Insert this heavy-duty mount into your 2" hitch to get 7 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Insert this heavy-duty mount into your 2" hitch to get 10 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Insert this heavy-duty mount into your 2" hitch to get 9 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Insert this heavy-duty mount into your 2" hitch to get 8 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Insert this heavy-duty mount into your 2-1/2" hitch to get 7 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
... Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, pintle hook and stabilizer kit included.If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Filters
