Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.Features: Locking latch kit lets you secure the entry door on your RV or travel trailer Replaces your Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch Helps
Replace the old locking latch on your door, toolbox, or storage compartment with this sturdy paddle-handle latch that locks with the included key. Safety lever allows the lock to be disengaged from ... Features: Locking latch with paddle handle replaces an old latch on your door, toolbox, or storage compartment Locks with included key Safety lever allows the lock to be disengaged from the inside
Steel cam-action door latch with 2" wide hasp is ideal for small enclosed cargo trailers. Can be installed flush on doors with a 3/4" offset. Positive double-action handle protects against ... Features: Cam-action door latch is ideal for side or rear doors on small utility trailers, vans, and trucks Bridge-type hasp helps prevent accidental opening and ensures safe latching action Can be
Flushmountedlatch with stainless steel spring, stainless steel finish, locking cylinder and an inside release. Mounts in 2-3/4" x 3-3/4" hole.Features: Stainless steel construction Inside release Specs: Mounts in 2-3/4" x 3-3/4" hole Fits doors up to 7/8" thick L1833, Door Latch, Paddle "JR" Lock Stainless Inner
Flushmountedlatch with stainless steel spring and rustproof finish. Mounts in 3-3/8" x 4-5/8" hole.Features: Plain, rustproof finish Overall dimensions: 5-1/2" long x 4-1/4" wide mounting hole dimensions: 4-5/8" long x 3-3/8" wide x 7/8" thick
Steel cam-action door latch with 1" wide hasp is ideal for small trailers and trucks. Can be installed on doors with up to a 3/4" offset. 14" Double-action handle protects against ... Features: Cam-action door latch is ideal for side or rear doors on small utility trailers, vans, and trucks Pairs with 3/4" diameter pipe (not included) Bridge-type hasp helps prevent accidental
Rustproof cam-action door latch is ideal for small enclosed cargo trailers. Can be installed on doors with up to a 3/4" offset. 14" Double-action handle protects against jarring while ... Features: Cam-action door latch is ideal for side or rear doors on small utility trailers, vans, and trucks Pairs with 3/4" diameter pipe (not included) Bridge-type hasp helps prevent accidental
Flushmountedlatch with stainless steel spring, stainless steel latch body, sturdy steel T-handle, and durable locking cylinder. Mounts in 2-3/4" x 3-3/4" hole.Features: Stainless steel latch body and sturdy steel T-handle Mounts in 2-3/4" x 3-3/4" hole
Rustproof, anti-rack, cam-action door latch is ideal for large trailers. 14-1/2" Double-action handle protects against jarring while driving. 3/4" Diameter pipe not included. pipe retainers are on 1 side only so you can mount the pipe closer to the edge of your door Double-action handle assembly ensures simple, secure latching and helps protect against in-transit jarring Flip
Flushmountedlatch with stainless steel spring Locking cylinder Stainless steel construction Overall dimensions: 4-3/4" wide x 3-5/8" tall Mounting hole dimensions (center to center
Flushmountedlatch with stainless steel spring, rustproof finish and locking cylinder. Mounts in 2-3/4" x 3-3/4" hole.Specs: Dimensions: 4-3/4" wide x 3-5/8" tall Mounts in 2-3/4" x 3-3/4" hole Features: Plain, rustproof finish 2 keys included
Compartment door trigger latch returns function to your interior compartment door by replacing 1 worn or damaged door trigger latch. Measures 3-3/4" long and 1-3/8" x 3" between ... Features: Compartment door trigger latch replaces 1 worn or damaged door trigger latchFlushmount Length: 3-3/4" Dimensions: 3" long x 1-3/8" wide Lifetime warranty
Flushmountedlatch with stainless steel spring, rustproof finish, locking cylinder and an inside release. Mounts in 2-3/4" x 3-3/4" hole.Features: Plain, rustproof finish Inside release Replacement lock tumbler (CHKT - sold separately) is available Specs: Mounts in 2-3/4" x 3-3/4" hole
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides corrosion resistance. resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Square mounting holes Mounting hardware not included Note
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flushmount with built-in ... red LEDs for tail light Clear lens with white LEDs for backup light Flushmount with built-in black flange - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not ... Features: Red, oblong light functions as stop, turn, and tail light Sealed, waterproof housing and lens unit Corrosion resistant 10 Super LEDs (Light Emitting Diode) Flange mounts with four mounting
Upgrade the original feed or manger door latch on your horse trailer to this durable locking latch. Door latch is hinged on the left side. Fits a standard cutout measuring 2-3/4" x 3-3/4".Features: Lock lets you secure the feed or manger door on your horse trailer Door latch paddle is hinged on the left side to open in the opposite direction as the door Die-cast zinc construction with
Lock it and forget it. This heavy-duty latch lock has a hidden, hardened shackle that can't be reached to cut. It fits most trailer door hasps, covering the shackle and rivets to help prevent ...
Upgrade the original feed or manger door latch on your horse trailer to this durable locking latch. Fits a standard cutout measuring 2-3/4" x 3-3/4".Features: Lock lets you secure the feed or manger door on your horse trailer Door latch paddle is hinged on the right side to open in the same direction as the door Die-cast zinc construction with
Flushmountedlatch with stainless steel spring, rustproof finish and locking cylinder. Mounts in 3-3/8" x 4-5/8" hole.Features: Plain, rustproof finish Specs: Mounts in 3-3/8" x 4-5/8" hole Mounts with one way screws or pop rivets (not included) This handle will work on doors up to 1-1/16 inches thick
Flushmountedlatch with stainless steel spring and rustproof finish. Mounts in 2-3/4" x 3-3/4" hole.Features: Plain, rustproof finish Specs: Mounts in 2-3/4" x 3-3/4" hole N1980, Door Latch, Paddle "JR" Non-locking, Plain Steel
These sturdy steel D-rings create stable tie-down points in your trailer or truck bed. Recessed D-rings swivel 360 degrees for versatile tie-down positioning. Installs easily with the included backing plates and hardware. WLL is 2,000 lbs per D-ring. recessed portion of the D-ring to sit inside Backing plates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4"
Filters
