Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull. Guides will help to center your boat during loading and to hold the boat during transport.
Keep your boat from drifting or rubbing the trailer. This 8" galvanized bracket secures sidebunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Highlights Made for Vertical Bunks: A wide 5" plate supports tall sidebunks so the hull rides steady and loads predictably. Resists Twisting: Thick steel resists twist and flex, keeping boards from walking on long hauls.
Guide your boat on straight every time. This 10" galvanized bracket secures sidebunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Highlights Made for Vertical Bunks: A wide 5" plate supports tall sidebunks so your boat's hull rides steady and loads predictably. Resists Twisting: Thick steel resists twist and flex, keeping your bunk boards from walking on long hauls.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 4-piece kit is pre-formed to quickly cover two 8' bunks.Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat. Fits Standard 2x4 Boards: Slides over your lumber, giving you a quick install.
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat. Fits Standard 2x6 Boards: Modular pieces slide over your lumber, giving you a quick install.
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat. Fits Standard 2x6 Boards: Modular pieces slide over your lumber, giving you a quick install.
Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.Features to know about Quick Installation - No Carpet Removal Needed These slicks install directly over your existing carpeted bunks, so you won't have to strip carpet, pull staples, or rebuild the boards underneath if you don't want to. But if you do replace the carpet on your bunks and finish them with these slicks, they'll help keep your bunks looking better for longer.
Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.Features to know about Quick Installation - No Carpet Removal Needed These slicks install directly over your existing carpeted bunks, so you won't have to strip carpet, pull staples, or rebuild the boards underneath if you don't want to. But if you do replace the carpet on your bunks and finish them with these slicks, they'll help keep your bunks looking better for longer.
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller BunksFeatures: Roller bunk bracket, for mounting galvanized Roller Bunks models Fits: DL21740 (model #6387) and DL21741 (model #6388) Sold individually 4 Needed to mount a pair of roller bunks Die-formed of heavy gauge steel plate TUFFPLATE finish Measurement between slotted holes from center to center: 1-1/4" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Dutton-Lainson roller bunk bracket for boat trailers.Features: Roller bunk bracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.Use Season After Season: Holds up to sun, water, and repeated use without breaking down. Keeps Your Bunks Cleaner: Diverts water and grit away from your hull. A Quick Fix for Sticky Bunks: Screws down over your carpeted bunks with included hardware.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allows you to install 2 roller bunks on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a single U-bolt (sold separately) Strong swivel brackets let you tilt the roller bunks Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 1-1/4" long x 1-3/4" wide x 2" tall Top flange mounting hole diameter: 7/16" Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.Use Season After Season: Holds up to sun, water, and repeated use without breaking down. Keeps Your Bunks Cleaner: Diverts water and grit away from your hull. A Quick Fix for Sticky Bunks: Screws down over your carpeted bunks with included hardware.
Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.Use Season After Season: Holds up to sun, water, and repeated use without breaking down. Keeps Your Bunks Cleaner: Diverts water and grit away from your hull. A Quick Fix for Sticky Bunks: Screws down over your carpeted bunks with included hardware.
Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.Use Season After Season: Holds up to sun, water, and repeated use without breaking down. Keeps Your Bunks Cleaner: Diverts water and grit away from your hull. A Quick Fix for Sticky Bunks: Screws down over your carpeted bunks with included hardware.
Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.Use Season After Season: Holds up to sun, water, and repeated use without breaking down. Keeps Your Bunks Cleaner: Diverts water and grit away from your hull. A Quick Fix for Sticky Bunks: Screws down over your carpeted bunks with included hardware.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
This wobble roller replaces 1 worn wobble or rocker roller on your boat trailer. Made of resilient polypropylene.Features: Replaces 1 wobble or rocker roller on the roller bunk assembly of your boat trailer Constructed of black polypropylene Made in the USA Specs: Application: roller bunk with 1/2" diameter shaft Dimensions: 2-1/2" diameter x 1-7/8" wide
Filters
