These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 3-3/8" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Specs: Application & Dimension: Axle capacity: 6K, 7K, or 8K 8-bolt axles Dexter 6K and 8K axles with screw in caps Dexter 9K axles manufactured before 10/1989 Lippert 8K axles Kodiak 8K hub-and-rotor disc brake kit Thread outer diameter: 2.875" Warranty: 5-Year Included in Kit: 1 hub cap, 1 gasket, 1 lens, 1 retainer ring, 1 foam gasket, 6 Torx screws, 1 Hydro-Shield vent plug, (1) 1/8 -27 Magnetic Plug, 1 O-Ring
Keep dirt and debris off the front of your towed vehicle while you're flat towing. Polyethylene panels with an aluminum frame create a robust shield for your car while still being able to flex with the wind, keeping it aerodynamic.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Allows for the perfect setting thanks to the fine-tooth star gear Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Protective dust shields keep internal components free from dirt, grime, and road debris E-coat on backing plates fends off rust Adjuster plugs (included) cover access holes Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH122510) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Quick Tip: There's really not a whole lot to getting new drum brakes.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Allows for the perfect setting thanks to the fine-tooth star gear Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Protective dust shields keep internal components free from dirt, grime, and road debris E-coat on backing plates fends off rust Adjuster plugs (included) cover access holes Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH122508) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Wheel size: 15" or larger Axle rating: 8,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Allows for the perfect setting thanks to the fine-tooth star gear Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Protective dust shields keep internal components free from dirt, grime, and road debris E-coat on backing plates fends off rust Adjuster plugs (included) cover access holes Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH122510) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 5" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 12,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251010) sold separately QAI and CSA certified Specs: Quantity: 10 left-hand and 10 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
Full-width mud flap protects your towed boat or trailer from rocks and debris. Custom-fits your vehicle to ensure a proper fit and full coverage. Mounts using existing holes and hardware. Flaps raise up to 4" higher than OEM ride height.Features: Full-width mud flap shields what you tow from mud, rocks, and road debris Protects your boat, car, snowmobile, ATV, or 5th-wheel trailer Full-width design offers maximum protection compared to standard-size mud flaps Custom fit to give you a from-the-factory look Mud flap hangs at the perfect length according to your vehicle's stock ride level Frame fits the contours of your bumper Stabilizing bar along back of flap prevents sailing and adds support Heavy-duty, 5/16" thick, smooth rubber mud flap offers better protection than thinner mud flaps Helps reduce flapping and decreases ice and mud buildup Maintains flexibility in temperatures as low as -40 F Adjustable design allows flap to be raised up to 4" higher than OEM ride height Heat shield (included) protects your mud flap from hot exhaust Rustproof aluminum frame and stainless steel hardware ensure durability Easy installation - mounting brackets use existing holes and hardware Diamond plate finish Made in the USA 1-Year limited warranty
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Specs: Application & Dimension: Axle capacity: 10,000-lb to 16,000-lb Thread outer diameter: 4" Warranty: 5-Year Included in Kit: 1 hub cap, 1 gasket, 1 lens, 1 retainer ring, 1 foam gasket, 6 Torx screws, 1 Hydro-Shield vent plug, (1) 1/8 -27 Magnetic Plug, 1 O-Ring
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12250810) sold separately QAI and CSA certified Specs: Quantity: 10 left-hand and 10 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Wheel size: 15" or larger Axle rating: 8,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Specs: Application & Dimension: Axle capacity: 9,000-lb manufactured after October 1, 1989 10,000-lb 12,000-lb heavy duty 15,000-lb heavy duty Thread outer diameter: 4" Warranty: 5-Year Included in Kit: 1 hub cap, 1 gasket, 1 lens, 1 retainer ring, 1 foam gasket, 6 Torx screws, 1 Hydro-Shield vent plug, (1) 1/8 -27 Magnetic Plug, 1 O-Ring
... Custom-fit for your vehicle to ensure a proper fit and full coverage. Includes exhaust heat shield. Mounting brackets use existing holes and hardware for simple install.Features: Full-width mud flap shields what you tow from mud, rocks, and road debris Protects your boat, car, snowmobile, ATV, or 5th-wheel trailer Full-width design offers maximum protection compared to standard-size mud flaps Custom fit to give you a from-the-factory look Mud flap hangs at the perfect length according to your vehicle's stock ride level Frame fits the contours of your bumper Stabilizing bar along back of flap prevents sailing and adds support Heavy-duty, 5/16" thick, smooth rubber mud flap offers better protection than thinner mud flaps Helps reduce flapping and decreases ice and mud buildup Maintains flexibility in temperatures as low as -40 F Heat shield (included) protects your mud flap from hot exhaust Rustproof aluminum frame and stainless steel hardware ensure durability Easy installation - mounting brackets use existing holes and hardware Diamond plate finish Made in the USA Specs: Dimensions: 82" long x 15-5/8" tall 1-Year limited warranty
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Specs: Application & Dimension: Axle capacity: 9,000-lb to 16,000-lb axles manufactured after 1996 Thread outer diameter: 3.75" Warranty: 5-Year Included in Kit: 1 hub cap, 1 gasket, 1 lens, 1 retainer ring, 1 foam gasket, 6 Torx screws, 1 Hydro-Shield vent plug, (1) 1/8 -27 Magnetic Plug, 1 O-Ring
... Custom-fit for your vehicle to ensure a proper fit and full coverage. Includes exhaust heat shield. Mounting brackets use existing holes and hardware for simple install.Features: Full-width mud flap shields what you tow from mud, rocks, and road debris Protects your boat, car, snowmobile, ATV, or 5th-wheel trailer Full-width design offers maximum protection compared to standard-size mud flaps Custom fit to give you a from-the-factory look Mud flap hangs at the perfect length according to your vehicle's stock ride level Frame fits the contours of your bumper Stabilizing bar along back of flap prevents sailing and adds support Heavy-duty, 5/16" thick, smooth rubber mud flap offers better protection than thinner mud flaps Helps reduce flapping and decreases ice and mud buildup Maintains flexibility in temperatures as low as -40 F Heat shield (included) protects your mud flap from hot exhaust Rustproof aluminum frame and stainless steel hardware ensure durability Easy installation - mounting brackets use existing holes and hardware Diamond plate finish Made in the USA 1-Year limited warranty
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to go further without worry.Specs: Application & Dimension: Axle capacity: Dexter 9K-10K GD axles manufactured after 7/2009 Thread outer diameter: 3.5" Warranty: 5-Year Included in Kit: 1 hub cap, 1 gasket, 1 lens, 1 retainer ring, 1 foam gasket, 6 Torx screws, 1 Hydro-Shield vent plug, (1) 1/8 -27 Magnetic Plug, 1 O-Ring
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251025) sold separately QAI and CSA certified Specs: Quantity: 25 left-hand and 25 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
Heavy-duty mud flaps are custom-fit to your truck for protection from rocks, mud, snow buildup and other debris that gets kicked up. Stylish hex-shield pattern with anti-sail splash guard. Simple bolt-on install.Features: Heavy-duty mud flaps protect your truck from rocks, mud, snow buildup and other debris that gets kicked up Does not fit rear position on dually tires Hex Shield pattern adds modern style Anti-sail splash guard prevents 'sailing' and reduces movement Channeled splash protection funnels water back towards the ground Offset design provides added tire clearance Durable carbon black HDPE construction Simple bolt-on installation - mounts in minutes Made in the USA Specs: Quantity: 2 mud flaps Position: front or rear
Heavy-duty mud flaps are custom-fit to your truck for protection from rocks, mud, snow buildup and other debris that gets kicked up. Stylish hex-shield pattern with anti-sail splash guard. Simple bolt-on install.Features: Heavy-duty mud flaps protect your truck from rocks, mud, snow buildup and other debris that gets kicked up Does not fit rear position on dually tires Hex Shield pattern adds modern style Anti-sail splash guard prevents 'sailing' and reduces movement Channeled splash protection funnels water back towards the ground Offset design provides added tire clearance Durable polished stainless-steel construction Simple bolt-on installation - mounts in minutes Made in the USA Specs: Quantity: 2 mud flaps Position: front or rear
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251010) sold separately QAI and CSA certified Specs: Quantity: 10 left-hand and 10 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 5" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 12,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251050) sold separately QAI and CSA certified Specs: Quantity: 50 left-hand and 50 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 5" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 12,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
Full-width mud flap protects your towed boat or trailer from rocks and debris. Custom-fits your vehicle to ensure a proper fit and full coverage. Mounts using existing holes and hardware. Flaps raise up to 4" higher than OEM ride height.Features: Full-width mud flap shields what you tow from mud, rocks, and road debris Protects your boat, car, snowmobile, ATV, or 5th-wheel trailer Full-width design offers maximum protection compared to standard-size mud flaps Custom fit to give you a from-the-factory look Mud flap hangs at the perfect length according to your vehicle's stock ride level Frame fits the contours of your bumper Stabilizing bar along back of flap prevents sailing and adds support Heavy-duty, 5/16" thick, smooth rubber mud flap offers better protection than thinner mud flaps Helps reduce flapping and decreases ice and mud buildup Maintains flexibility in temperatures as low as -40 F Adjustable design allows flap to be raised up to 4" higher than OEM ride height Heat shield (included) protects your mud flap from hot exhaust Rustproof aluminum frame and stainless steel hardware ensure durability Easy installation - mounting brackets use existing holes and hardware Diamond plate finish Made in the USA 1-Year limited warranty
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12250825) sold separately QAI and CSA certified Specs: Quantity: 25 left-hand and 25 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Wheel size: 15" or larger Axle rating: 8,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251025) sold separately QAI and CSA certified Specs: Quantity: 25 left-hand and 25 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 5" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 12,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
... Brake pads are made of durable friction material for improved braking. E-coated backing plates resist rust. Dust shields protect from debris. Fit 15" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Self-adjusting brakes do not require periodic manual adjustment like standard brakes Fine-tooth brake adjustment gears allow for a more precise setting Dust shields protect from debris while you're towing E-coated backing plates resist wear and corrosion Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH12251050) sold separately QAI and CSA certified Specs: Quantity: 50 left-hand and 50 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12-1/4" diameter x 3-3/8" wide Mounting flange bolt pattern: 7 bolt Wheel size: 15" or larger Axle rating: 10,000 lbs Limited 1-year warranty Self-Adjusting Brakes Don't Require Routine Adjustment Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance.
Filters
