Features: Unslotted, hex-washer-head self-drilling screw Zinc coated for corrosion resistance Great for use on grounding wires with a 1/4" diameter ring terminal 1/4" -14 x 3/4" long threads
Use this Snap-Loc self-tappingscrew set to attach e-tracks to a metal surface. Built-in washer head for non-scratch installation. Made from zinc-plated steel.Features: Attaches e-tracks to a metal surface Built-in washer head for non-scratch installation and added holding power Includes 20 heavy-duty, zinc-plated steel screws Specs: Dimensions: 1-1/4" long x 1/4" diameter Break strength: 600 lbs Working load limit: 200 lbs
Use this Snap-Loc self-tappingscrew set to attach 2 Snap-Loc single-slot E-track tie-down anchors to a metal surface. Great for Snap-loc anchors that must be surface mounted. ... Features: Attaches 2 bolt-on Snap-Loc E-track tie-down anchors to a metal surface Works on most structural metal framing Includes 4 heavy-duty, zinc-plated steel screws Dimensions: 1-1/2" long x 5/16" diameter
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tappingscrew and a ring terminal (sold separately). Wiring Configuration Wire Color Wire Function Green Right turn and brake light Brown Tail lights and running lights White Ground Yellow Left turn and brake light Quick Tips: We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years: Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
Hey Juan, We do have just the nut retainer individually available as part #6-190. For the hub cap we do have a replacement hub cap with rubber plug available for a 2.72" hub bore diameter #TRU66FR. I wasn't sure if the 2.72 was the hub cap…
Hey Eric! There has definitely been some confusion around the specs on this scale. I just contacted B&W and can confirm that the B&W Digital Tongue Weight Scale w/ LED Screen #BW34KR has a max capacity of 4,000 lbs. It has been listed on our…
We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.
While we have not installed the 7-Way RV Upgrade Kit #ETBC7L on a 2019 Subaru Forester or the same generation in our shop. We do have a installation video of this installed on a 2020 Outback which is on the same Subaru Global Platform. So running the…
Yes, we have the Pollak RV 7-Blade Plug End Socket w/Mounting Bracket #PK12-704. It will require you to cut off your current connectors to wire in the new ones. I recommend using Loctite Electrical Connection Dielectric Grease #LT37534 on those…
For the 4-pin harness for your 2017 Subaru Outback, I recommend using the Curt T Connector #C56040. The converter box in the Curt models is better quality than the Hopkins wiring options. There is no splicing required to install the T Connector onto…
The EcoHitch #EH34FR doesn't provide an integral bracket for installing a 7-way trailer connector. We offer bracket mounts that usually work pretty well, which will use a pipe clamp to attach to the hitch crossbar, but because the crossbar will…
Most likely what you would need is the part #30717. This has a 4-way on one side of the connector that would get plugged into your Explorer and 7-way connector on the other side for connecting to your trailer. This 7-way is a 7-way blade style…
The Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch #C58000 is a great option for you and won't interfere with your J-Pin #63201. This mount fits the collar of the hitch snugly so it will not…
It sounds like you are on the right track to rewire your cattle trailer. You are correct about the wire colors on the 7-way connector that you purchased. The colors that you see on the 7-way connector are typical for RV style trailers rather than…
This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…
As far as the mounting bracket, you can absolutely screw it directly to the hitch if you want. We do this frequently in our own installs and it will not compromise the strength of the hitch in any way. Now putting a few holes in the hitch does open…
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.To make this connection, you'll need a ring terminal (sold separately) and the the included self-tappingscrew. Wiring Configuration Wire Color Wire Function Green Right turn and brake light Brown Tail lights and running lights White Ground Yellow Left turn and brake light Easily Mount Connector with Included Bracket The included mounting bracket can be installed on your hitch or attached to another bracket (sold separately) that mounts under your bumper with the included hardware.
5' E track rail lets you create anchor points on the wall or floor of your trailer or in your workshop. Multiple slots accommodate straps, tie-down anchors, hooks, and other E track accessories. 6,000 lbs Max load.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
36" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
36" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
48" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
... Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tappingscrew Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
... Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Includes powered converter wiring kit for complete installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Power wire: 20' Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tappingscrew Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Comparable to the 3M red quick splice Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 18-22 Maximum power rating: 600 volts Color: red Additional tools needed: pliers
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Specs: Quantity 1 Gauge: 10-12 Maximum power rating: 600 volts Color: yellow Additional tools needed: pliers Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Pliers needed to squeeze down on the blade after wires are placed
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Comparable to the 3M blue quick splice Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 18-16-14 Maximum power rating: 600 volts Color: blue Additional tools needed: pliers
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 14-16-18/10-12 Maximum power rating: 600 volts Color: brown Additional tools needed: pliers
Filters
