Replace your RVs grab handle with a proper handrail that feels like your staircase at home. The lengthy 54" rail helps stabilize you from the first step. Folds flat against your RV with a sleek, low-profile look that won't obstruct the door.Slide out should be at least 4-1/4" away from the outer edge of the door. This image shows the trim from a slide out is far enough away to allow installation.
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.For use with RV-approved accessories only. The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
However you cook, this all-in-one setup has you covered. Upgrade Your RV Kitchen with a Seamless Fit Upgrading your RV kitchen? This built-in microwave slides right into your existing cutout, so you won't have to deal with a big remodel.
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 12'1" from edge to edge. Includes all necessary components.And when your slide-out is pulled in, that mold gets inside your RV. The Solera RVslide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out.
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 13'1" from edge to edge. Includes all necessary components.And when your slide-out is pulled in, that mold gets inside your RV. The Solera RVslide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out.
Replace a worn-out wiper seal on the flanges surrounding your RV slide out with a durable and longer-lasting upgrade. Seal presses into existing 3/16" flange for an easy DIY installation. Integrated bulb seals your RV slide when retracted.Features: RVslide out seal stops water and pests from getting into your living area Bulb seals against the RV to keep out the elements when the slide-out is closed Flexible metal core helps wiper keep a good grip Easy installation - push onto existing railing for weather stripping Fits 3/16" pinch-weld thick flange Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 40' long x 15/16" wide x 2-7/8" tall Made in the USA
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.The mats include pre-cut lines on the back in 1-1/2" sections so that you can trim the Rock Tamers to the appropriate length for your vehicle. A punch tool is included to create holes in the mudflap for attaching the installation clamp bolts.
Replace a worn-out adhesive wiper seal on your RV slide out with a durable and longer-lasting upgrade. Wiper sticks in place with 3M backing for an easy DIY install. Integrated bulb seals your RV slide when retracted.Features: RVslide out seal stops water and pests from getting into your living area Commonly found on current Forest River 5th wheels and 2013 Itasca Meridian motorhomes Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3-3/16" wide x 15/16" tall Made in the USA
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide topper awning. Made for slide-outs that measure up to 11'7" from edge to edge. Includes all necessary components.There is no difference in how it functions or installs. How to Measure for an RVSlide-Out Awning To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning.
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the vehicle frame. Powder coated steel is sturdy and corrosion resistant.Features: Universal hitch designed for use on RVs and motorhomes Heavy-duty side brackets allow for maximum adjustability Slide along hitch body to match the width of your vehicle frame Work on box frame, C-channel frame, or I-beam frame Let you position tube mounts toward the front or rear, putting the hitch body in the best location for clearance Hardware included High-gloss black powder coat finish resists rust, corrosion, and is resistant to scratches and UV damage Strong, secure all-frame attachment Solid construction for maximum strength and safety Not for use with a weight distribution system Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight: 5,000 lbs Maximum tongue weight: 500 lbs Fits RV frame width: Minimum: 22" Maximum: 66" Overall width of hitch: 68-1/2" Overall length of receiver tube including crossbar: 11" Distance from front of crossbar to front of receiver tube: 8-3/16" Limited lifetime warranty Notes: The main hitch body tube can be trimmed so the ends are flush with the frame brackets.
Love to DIY? You can use this trim kit, a rail kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your RV cargo compartment. ... Features: DIY a complete slide-out tray - Pair this trim kit with a rail kit (sold separately) and plywood bottom (not included) Store and retrieve camping gear - Perfect for tools, power cords, and hiking boots Secure your belongings - Raised ends prevent your gear from sliding off during travel Resists rust during rainy weather - Durable steel has a powder-coat finish Easy to assemble - Trim pieces attach to the rail kit with the included rivets Buy American - Trim kit is made in the USA Specs: Fits: cargo compartment openings 41" wide Tray weight capacity (when fully assembled and installed): 800 lbs Overall width of end trim pieces: 37" 1-Year warranty Kit includes: 2 End trim pieces 3 Mid-rail trim pieces 2 jig cross strips 4 jig knee braces 40 rivets Pair this tray trim kit with a rail kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.The mats include pre-cut lines on the back in 1-1/2" sections so that you can trim the Rock Tamers to the appropriate length for your vehicle. A punch tool is included to create holes in the mud flap for attaching the installation clamp bolts.
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 7'7" from edge to edge. Includes all necessary components.And when your slide-out is pulled in, that mold gets inside your RV. The Solera RVslide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out.
Replace broken and worn out trim molding with a durable and longer-lasting upgrade. This seal works like a bumper to protect against impacts and scuffs and keeps screw tracks safe from the elements with a clean, finished look. Fits 1/2" tracks.
Replace a worn-out adhesive wiper seal on your RV slide out with a durable and longer-lasting upgrade. Wiper sticks in place with 3M backing for an easy DIY install. Integrated bulb seals your RV slide when retracted.Features: RVslide out seal stops water and pests from getting into your living area Commonly found on current Forest River 5th wheels and 2013 Itasca Meridian motorhomes Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 3-3/16" wide x 15/16" tall Made in the USA
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.Features: RVslide out seal stops water and pests from getting into your living area Ideal for Evergreen Bayhill 5th wheels and other RVs Integrated track creates installation point for bulb seal to weatherproof slide when closed Compatible with 1" and 1-3/16" channel bulb seals (SR74FR and SR57FR - sold separately) Peel-and-stick installation with pre-applied 3M adhesive backing Apply the seal to the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3-3/4" wide Made in the USA
Adjustable trailer receiver hitch is designed for use on RVs and can be bolted to the vehicle frame or welded on for a no-drill application. Provides a 2" drop to fit your application. Powder coated steel is sturdy and corrosion resistant.If welding this hitch, all welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty. The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
Love to DIY? You can use this trim kit, a rail kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your RV cargo compartment. ... Features: DIY a complete slide-out tray - Pair this trim kit with a rail kit (sold separately) and plywood bottom (not included) Store and retrieve camping gear - Perfect for tools, power cords, and hiking boots Secure your belongings - Raised ends prevent your gear from sliding off during travel Resists rust during rainy weather - Durable steel has a powder-coat finish Easy to assemble - Trim pieces attach to the rail kit with rivets (not included) Buy American - Trim kit is made in the USA Specs: Fits: cargo compartment openings 36" wide Tray weight capacity (when fully assembled and installed): 200 lbs Overall width of end trim pieces: 32" 1-Year warranty Pair this tray trim kit with a rail kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper.
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide-topper awning. Made for slide-outs that measure up to 12'1" from edge to edge. Includes all necessary components.And when your slide-out is pulled in, that mold gets inside your RV. The Solera RVslide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out.
Why clutter your RV kitchen with multiple appliances when one can do it all? This 3-in-1 microwave, convection oven, and air fryer reheats leftovers, bakes cookies, and crisps bacon. It fits your existing cutout and frees up valuable counterspace!However you cook, this all-in-one setup has you covered. Upgrade Your RV Kitchen with a Seamless Fit Upgrading your RV kitchen? This built-in microwave slides right into your existing cutout, so you won't have to deal with a big remodel.
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR27FR, SR67FR, and SR99FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1" wide x 7/8" tall Made in the USA
Love to DIY? Use this rail kit, a trim kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your cargo compartment. And you can easily slide these rails out of your RV to grab your camping gear.Features: DIY a complete slide-out tray - Pair this rail kit with a trim kit (sold separately) and plywood bottom (not included) Store and retrieve camping gear - Perfect for tools, power cords, and hiking boots Customize your tray - Opt for a full-length tray or dividers for smaller items Lockable when stowed - Spring-loaded latches prevent the rails from sliding during travel Resists rust during rainy weather - Durable steel has a powder-coat finish Easy to install - Rails bolt onto the floor of your cargo compartment Buy American - Rail kit is made in the USA Specs: Fits: RV cargo compartments at least 60" long Tray weight capacity (when fully assembled and installed): 800 lbs Overall length (per assembled rail): 60" 1-Year warranty Additional parts you may need: 2x4s (Not included) raise the rails so they can adequately clear your compartment door Wood screws and 5/16" hardware (not included) are required for installation Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper.
If you're having trouble finding just the right weather stripping for your RV slide out, this will get you a custom fit. This wiper includes a track for a C-channel bulb seal in the height you need. Easy installation with peel-and-stick adhesive.Features: RVslide out seal stops water and pests from getting into your living area Ideal for Evergreen Bayhill 5th wheels and other RVs Integrated track creates installation point for bulb seal to weatherproof slide when closed Compatible with 1" and 1-3/16" channel bulb seals (SR84FR and SR37FR - sold separately) Peel-and-stick installation with pre-applied 3M adhesive backing Apply the seal to the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 3-3/4" wide Made in the USA
Filters
