The hydraulic bottlejack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.Using a Unijack Begin using the Unijack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift. Determine the best lifting point to support the bottlejack and line up the piston ram underneath it. Once everything is lined up correctly, turn the lever switch at the base of the piston clockwise to allow you to move the piston up and down.
If you off-road but space is tight, this Tallboy kit gives you both lifting and support in one setup. The 6-ton bottlejack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Oversized jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
If you off-road but space is tight, the Tallboy kit gives you both lifting and support in one setup. The 2-ton bottlejack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Free Up Your Jack: Transfer the raised load to the stand so you can reposition the bottlejack for the next step. Stay Planted on Rough Ground: Large jack base gives you a broad foundation on gravel, sand, dirt, and other uneven surfaces.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.Even when the shoulder is a little rough, the oversized base plate helps the jack stay planted and secure. You can use the swappable saddles to lift from the axle or the frame, depending on what's safest. And if you want additional stability, a jack pad (like the Outrigger Pad or StakPad ) can add another layer of support.
If you off-road but space is at a premium, the Tallboy is a compact bottlejack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
... The bottlejack locks into place for a stable, safe lift.Features: Raises, lowers, and stabilizes high profile vehicles, house foundations, and heavy equipment Great for garages, shops, or to keep as a spare in your vehicle Handle locks into place to assure a secured upright position Steel saddle and cast handle socket Meets ANSI standards Specs: Weight capacity: 2 tons Lift: 6-3/16" - 12-1/16" Base dimensions: 3" wide x 3-1/2" long 1-Year warranty Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight. Using a BottleJack Begin using the bottlejack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift.
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.Its modular extension tubes let you configure the stand around the support point, giving you one setup that can work across substantially different heights. Support the Load and Move Your Jack The Tallboy jack stand complements Power Mountain's Tallboy bottlejacks by taking over the support job after the load is raised.
The hydraulic bottlejack lifts, holds, and locks vehicles in place without jack stands. Fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 18-3/8" Lift range with 2 ton capacity.Using a Unijack Begin using the Unijack by placing it on solid, level ground in a vertical position under the vehicle or object you wish to lift. Determine the best lifting point to support the bottlejack and line up the piston ram underneath it. Once everything is lined up correctly, turn the lever switch at the base of the piston clockwise to allow you to move the piston up and down.
This electric scissor jack lets you easily raise and lower your vehicle for emergency tire changes. It plugs into your vehicle's 12-volt accessory outlet for use while on the road, and it includes a hand-held remote with 12' cord.Features: Electric scissor jack lets you raise and lower your vehicle for emergency tire changes Designed for compact to medium sized vehicles Push-button remote lets you operate jack from up to 12' away Plugs into your vehicle's 12-volt accessory outlet Emergency hand crank lets you operate jack if no power is available from your vehicle's battery 3 Replacement 11-amp fuses included in case of blowout from overloaded circuit Compact carry case lets you easily store and transport jack and hand crank in your vehicle Specs: Weight capacity: Extended 14": 4,000 lbs Extended 10": 2,400 lbs Extended 8": 1,600 lbs Extended 6": 1,200 lbs Lift range: 4-3/8" - 13-3/8" Base dimensions: 7" long x 5" wide Rated current: 11 amps Output power: 75 watts Weight: 11 lbs 1-Year limited warranty
When the trailer settles into soft ground or the load shifts, you can get moving again without wasting time looking for a workaround. 48" farm jack features an 8,000 lb capacity and manual operation for trailer, farm, and off-road use.Reposition Loads That Settled Crooked: Farm jack design handles lifting and positioning when trailers do not sit level. Keep a Recovery Tool Ready to Grab: Compact footprint stores easier in your trailer or equipment setup between jobs.
When the trailer settles into soft ground or the load shifts, you can get moving again without wasting time looking for a workaround. 60" farm jack features an 8,000 lb capacity and manual operation for trailer, farm, and off-road use.Pull Stuck Loads That Will Not Roll Free Some recovery situations need pulling force instead of vertical lift. This farm jack can be used with chains or straps for manual winching, giving you another way to drag, reposition, or free stuck equipment when traction alone is not enough to move it.
The Triple Lift jack adapts to multiple vehicles, ATVs, UTVs, and motorcycles with its ability to remove the lift saddle. The locking safety bar holds the jack in place once raised, removing the need for jack stands.Using the Triple Lift Jack The Triple Lift floor jack is a 3-in-1 jack that converts from a floor jack to an ATV jack and also to a jack stand. The removable round lifting saddle is perfect for raising vehicles.
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jack stands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jack stands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jack stands with 10 lock-safe settings Jack stand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jack stand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
Get yourself out of tricky spots with this hydraulic recovery jack. Each downward motion on the handle lifts your vehicle 1/2" and rubber bumpers shield it from damage. Made from aircraft grade aluminum for maximum strength.Features: Recovery jack raises, lowers, and stabilizes your vehicle to help you out of tricky spots on the trail Each downward motion gives you 1/2" of lift 9 Locating points for the jack's hook give you more flexibility to get leverage under your vehicle during recoveries Red lowering lever lets you safely lower the vehicle either slowly or quickly Rubber bumper protects your vehicle from dents and scratches Foot rotates 360 degrees and pivots to match the terrain and increase reliability For increased stability on soft or slick ground, pair with ARB Jack Pad (sold separately) Constructed from aircraft grade 6061 T6 aluminum for maximum strength Meets ASME standards Specs: Weight capacity: 4,409 lbs Lift range: 6" - 46" Travel: 21" - 22" Height: Compressed: 35" Extended: 56" Foot dimensions: 6-1/2" diameter x 2" tall Weight: 23 lbs 3-Year warranty
... Always use jack stands in pairs for safety.Features: Position these 2-ton jack stands under your vehicle at the manufacturer-indicated load support points Adjusting the height is easy with the ratchet-style lifting mechanism Hold control lever up while lifting the saddle shaft to your desired height Push control lever down to lock pawl into teeth located in center column Carefully lower vehicle to desired height Specs: Capacity: 2 tons Lift height measurements: Minimum height: 10-3/4" Maximum height: 16-3/4" Base dimensions: 6-11/16" long x 6-15/16" wide Quantity: 2 jacks 1-Year limited warranty Note: Always use jacks in pairs.
Features: Plastic bottle with magnetic clamp Tapered fittings that fit both bleed screws and master cylinder fittings 3 pieces of vinyl hose included 648591 Alltrade Tools Powerbuilt Brake Bleeder - Master Kit This brake bleeder can be used for bleeding of all types of automotive hydraulic cylinders by one person.
Thread this brass blow-out plug onto your RV's city water inlet, snap in your compressor hose, and clear excess water from the plumbing with a hands-free connection that's ready for one-person winterizing.Features to know about Connect Your Compressor and Clear the Water Lines Winterizing your RV means clearing excess water from the fresh-water plumbing. The 3/4-inch GHT (Garden Hose Thread) connection screws onto your city water inlet, while the standard 1/4-inch industrial quick-connect plug connects to your air compressor hose.
Easily pump antifreeze into your RV's water lines during winterization with this hand pump. Connect hose to your RV's city water inlet and pump in from antifreeze container. ... Features: Durable hand pump lets you pump antifreeze into your RV's plumbing during winterization Lead-free construction won't contaminate your water lines Flexible hose connects pump to your RV's city water inlet Can also pump antifreeze through your RV's indoor faucet with adapter (W1527VP - sold separately) Extension tube lets you reach the bottom of antifreeze containers Specs: Pump dimensions: 12-1/4" long x 1-3/4" diameter Hose length: 36" Extension tube dimensions: 12" long x 3/4" diameter 1-Year warranty
This circuit tester plugs into the 7-way connector on your vehicle. LED lights indicate which functions (brake, turn, tail, stop, reverse, electric brakes, and 12V) are properly working. Color-coded LEDs make it easy to distinguish each signal.
This circuit tester plugs into the 7-way connector on your truck. LED lights indicate which functions (brake, turn, tail, stop, reverse and 12V) are properly working.
Winterizing isn't the end of adventure, it's how you make sure the next one starts right. This -50°F antifreeze keeps your RV or boat's plumbing protected through the cold so your first trip starts without a hitch.This propylene glycol-based -50°F antifreeze provides dependable protection for moderate climates but can start to slush near freezing, making it harder to drain your system. If you're storing your RV in colder regions or for an extended subzero stretch, step up to Prime Guard -100°F RV & Marine Antifreeze (PG96ZR) for reliable freeze protection.
... Now make sure winter doesn't set you back. This -100°F antifreeze keeps your RV, boat, or EV water system protected through deep freezes, so everything works like it should when it's time to roll.Bulk Pack Convenience: Includes six 1-gallon jugs - enough to winterize most RVs and boats completely. Features to know about Extreme Cold Protection When temperatures drop, you need antifreeze you can trust. This -100°F formula protects your RV, boat, or EV water system during long-term subzero storage.
Prevent your water hose from crimping and impeding flow with this 90-degree brass elbow that connects to your RV's water intake fitting. Removable screen filter helps keep debris out of water system. Fits hoses with a 3/4" diameter fitting.Features: 90-Degree brass elbow prevents your water hose from crimping and impeding water flow Male end threads into your RV Female end attaches to your hose Lead-free brass valve won't contaminate incoming water or rust over time Removable screen filter helps keep debris out of your water system Easy-grip knob lets you easily attach and detach your hose Specs: Fitting size: 3/4" NPT Elbow dimensions: 3-1/4" tall x 2-1/4" deep Knob diameter: 1-11/16"
Filters
