This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Specs: Application: Replaces factory 7-way connector on trucks and SUVs Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the main unit. Note: If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake controller installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller.
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Quick Hookups: Choose the plug you need without rewiring.
... Waterproof, incandescent trailer light provides backup light function. Durable polycarbonate housing and lens. Recessed mount with included grommet. Hardwires with included 2-wire plug. (1) 1156 bulb.Features: Incandescent trailer light provides backup light function for trailers and utility trucks Sealed, waterproof housing and lens unit is submersible Durable polycarbonate housing and lens Clear lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet Mounts in vertical or horizontal position 2-Wire plug includes power lead and ground wire Works with 3-wire plug to provide accessory low-light function DOT compliant in horizontal or vertical position Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: 1156 Wire length: 10-1/2" Power draw at 12V: 2.1 amps 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Truck-Lite # 60004C and 60084C Grote # 62251 Optronics # BU74CB Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug makes trailer connections DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller.
... LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.Features: Oval LED trailer tail light serves 4 functions Turn signal, tail light. and brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet Mounts in any 360-degree position Industry-standard AMP-style plug DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.19 amps Tail: 0.02 amps Reverse: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller.
... Copper conducters eliminate wire failure. Tongue-and-groove lens. Recessed mount with included grommet and 2-wire plug.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation.
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately). The weathertight connector blocks out moistureFeatures: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) Weatherproof connector hardwires to trailer with pigtail harness (A45PMB - sold separately) Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn signal light: 0.161 amps Tail light: 0.007 amps Lifetime warranty on LEDs Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all. The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the Venturer.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plug-in harness hardwires to your vehicle and plugs into unit Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plug-in harness hardwires to your vehicle and plugs into unit Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
... This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.Simple, Out-of-the-Way Installation You won't be banging your knee on a bulky brake controller or interfering with your vehicle's lower airbags because the main unit mounts out of sight under your dash. This product comes with an adhesive pad and 4 zip ties to make it easy to mount anywhere. (Just don't zip-tie the box to wiring or cables that can shift as you drive!)
... LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.Features: Round LED trailer tail light serves 4 functions Turn signal, tail light. and Brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet Industry-standard AMP-style plug DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 4-1/4" diameter x 1-3/8" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.18 amps Tail: 0.02 amps Reverse: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.Features: Time delayed: activates trailer brakes with preset intensity Rocker switches control gain and load settings Gain: adjusts on scale of 0.5 to 9.9 Load: adjusts on scale of 1 to 9 Large pinch-trigger manual override Easy to reach without taking your eyes off the road LED display is bright, large, and adjustable Displays error messages so you can troubleshoot Shows settings using numbers and letters Adjusts brightness for best visibility Auto-sleep mode activates after 5 minutes to prevent draining the battery No mounting restrictions: install anywhere at any angle Included mounting bracket and hardware hold the unit flush against the dash Plug-in harness hardwires to your vehicle and plugs into unit Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with low-volt, PWM , ABS , cruise control, and electric-over-hydraulic trailer brakes Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers Single LED with red lens More efficient and durable than incandescent bulbs Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Polycarbonate lens and housing Recessed mounting with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 4-1/8" diameter x 1-3/4" thick Diodes: 1 Power draw at 12.8V: Stop/turn: 0.25 amps Tail: 0.007 amps Warranty: Lifetime on LEDs 3-Year on housing and lens Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plug-in harness hardwires to your vehicle and plugs into unit Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Sleep mode will turn off again the moment you press the brake pedal. Installation Automatic leveling means your mounting options are limitless, so long as you can still easily access the controller and the manual override. The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plug-in harness hardwires to your vehicle and plugs into unit Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Limited lifetime warranty Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
Filters
