Features: Replaces (1) M12 lockingwasher for Thule hitch-mounted products Couples with M12 washer, hitch pin or lock pin, and hitch lock housing (sold separately) to secure a carrier into your trailer hitch receiver Specs: Application: Thule hitch-mounted products
This zinc-plated steel bolt and lockwasher secure your Softride Dura, Versa or HD bike carrier to your 1-1/4" square trailer hitch receiver. Anti-rattle, tightening technology keeps your bike carrier snug in your hitch receiver.Features: Zinc-plated steel bolt and lockwasher with QuietRide anti-rattle technology keeps your bike rack secure in your trailer hitch Works with Softride Dura, Versa and HD trailer-hitch-mounted bike racks when used with 1-1/4" hitches Specs: Application: Softride Dura Parallelogram Tilting 4-Bike Rack (SR26247), Hydraulic-Assist Dura Tilting 4-Bike Rack (SR26321), Versa Tilting and Folding 2-Bike Rack (SR26249) and HD 4-Bike Rack for 1-1/4" Hitches (24920), Alumina³ Parallelogram Tilting 3-Bike Rack (SR26428) and Element Parallelogram Tilting 4-Bike Rack (SR26248)
Replacement lockwasher works with keeper bolt that holds 1 trunnion spring bar of your e2 weight-distribution system in place inside its socket.Features: Replacement lockwasher is designed for use with Fastway e2 weight-distribution systems with trunnion spring bars Helps to secure keeper bolt that holds 1 spring bar in place inside of trunnion on head assembly 10-mm Diameter
Replaces 1 of the M8 lockwashers needed for your Thule Doubletrack 2 (TH990XT).Features: Replaces a M8 lockwasher for your Thule Doubletrack 2 (TH990XT) Quantity: 1 lockwasher Fits: Thule Doubletrack 2 bike rack: TH990XT
Use your Lock N Roll articulating coupler with this weight distribution hitch for smoother handling. Simple setup - needs no washers or drilling into your trailer frame. ... Specs: Application: Lock N Roll hitch setup with vehicle-side adjustable channel Required channel width: 3" Required bolt hole spacing: 2" Maximum tongue weight: 1,100 lbs Maximum gross towing weight: 11,000 lbs System weight: 85 lbs Features: Works with your Lock N Roll hitch setup to evenly distribute excess tongue weight Creates a more level ride for both tow vehicle and trailer No lift chains - eliminates unwanted movement Holds your trailer in line using a rigid system of steel bars and tensioning brackets Offers simple adjustment for spring bar angle with pre-installed bolt Steel construction Simple installation No-drill, clamp-on brackets mount directly to your trailer frame No counting washers - pre-installed bolt in the hitch head lets you tilt the angle of the spring bars No lifting spring bars - tighten a few nuts to position spring bars beneath your trailer frame (impact wrench recommended - not included) All necessary installation hardware included Adjustable channel mount sold separately Made in the USA Note: This system is not compatible with Lock N Roll articulating couplers with 15" and 30" extensions (336TS520 and 336TS526).
Features: Replaces 1 thin, black M6 washer for Thule roof-mounted accessories Works with M6 tamperproof screw, M6 x 12 mm Allen bolt and other M6 bolts Specs: Application: Thule Professional or DeWalt Rapid-Action Locking Ladder Holder (TH349); Thule Tracker II Half Foot Pack (TH4302), Thule Tracker roof-rack fit kits TK2 (THTK2), TK3 (THTK3), TK4 (THTK4) and TK5 (THTK5); Thule Sidearm Roof-Mounted Bike Rack (TH594); Thule Goalpost Hitch-Mounted Load Bar (TH997); Thule Bed-Rider Truck-Bed-Mounted Bike Carrier (TH822); or Thule Hullavator - Easy Loading (Strut Assisted) Rooftop Kayak Carrier System (TH897XT)
Replace the spindle nuts, washers, and cotter pins on your axle shaft with this kit from CE Smith.Features: Replaces the spindle nuts on your 1" axle shaft Includes 2 shaft washers and cotter pins Specs: Spindle nut diameters: Outer diameter: 1-3/8" Inner diameter: 7/8" Cotter pin length: 1-3/4"
Replaces the anti-rattle hitch bolt, washer, and clip for your Yakima HangOver bike rack.Features: Replaces the anti-rattle hitch bolt for your Yakima HangOver bike rack Works with Y02484 and Y02485 Includes hitch bolt, washer, and clip for securing the rack to your hitch receiver
Replacement rivet and washers are used to achieve proper positioning of your Equal-i-zer weight-distribution head. Designed for use with all Equal-i-zer systems.Features: Replacement hardware fits all Equal-i-zer weight-distribution systems Includes one rivet and 6 spacer washers: Rivet inserts into head assembly Washers act as spacers - slide as many as needed onto rivet to achieve proper head tilt Angle set bolt (sold separately) tightens head to maintain angle Made in the USA
Replace lost or damaged weight distribution conical washers with this replacement kit from Curt. Includes four washers.Features: Replaces lost or conical washers on your Curt weight distribution system Kit includes (4) 3/4" conical washers
Secure a wobble roller on your boat trailer with the help of this washer. It is constructed of zinc-plated steel and fits a 3/4" roller shaft.Features: Washer helps you to mount a wobble roller to your boat trailer's roller bunk Zinc-plated steel construction is sturdy and long-lasting Made in USA Specs: Application: 3/4" roller shafts Quantity: 1 washer
Replacement washer is designed for use with 1" diameter spindles.Features: Replacement washer is designed for use with 1" diameter spindles Specs: Overall diameter: 1.658" Inner diameter: 1.01" Thickness: 0.121"
Replacement washer is used in conjunction with rivet (EQ90-03-9105 - sold separately) to achieve proper positioning of your Equal-i-zer weight-distribution head. ... Features: Replacement washer fits all Equal-i-zer weight-distribution systems Includes 1 washer Recommended 6 for use as spacers to achieve proper head tilt Made in the USA
Slide this washer onto the spacer rivet of your e2 weight-distribution system to increase the tilt of your system's head.Features: Washer fits all Fastway e2 weight-distribution systems Slides onto spacer rivet (sold separately) to increase head tilt for desired positioning 1/2" Diameter
Adjust the tilt of your Curt trunnion-style weight distribution system head with this angle adjustment kit. Includes 2 pins and 2 washers to help you level your trailer and fine-tune spring bar tension for a smoother, safer tow.Features: Replacement kit for adjusting the head angle on Curt trunnion-style weight distribution hitches Includes 2 adjustment pins and 2 washers for precise tilt control Provides multiple head tilt options to level your trailer and promote even weight distribution Zinc finish resists rust and corrosion Compatible only with Curt trunnion-style weight distribution hitches
Secure a wobble roller on your boat trailer with the help of this washer. It is constructed of zinc-plated steel and fits a 1-1/8" roller shaft.Features: Washer helps you to mount a wobble roller to your boat trailer's roller bunk Zinc-plated steel construction is sturdy and long-lasting Made in USA Specs: Application: 1-1/8" roller shafts Quantity: 1 washer
Filters
