The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is adjustable on-the-fly. 2-5/16" Ball and 2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a more level ride for both tow vehicle and trailer Super-quiet sway control works without noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy to achieve with the pump of a pressurized handle Keep track of the psi setting to recreate your perfect tow setup every time you hit the road Make adjustments on-the-fly, even on the side of the road Get more leverage when pumping at higher pressure levels by extending the handle Huge tongue weight range can handle almost anything Grows with you as you upgrade to larger trailers and campers Uses flexible load bars that support light and heavy loads alike Fast and easy setup every time Preset pitch in the system head means it's always ready to go - no need to adjust No more circling your trailer to snap spring bars into place - single-piece load bar assembly can be set up entirely from driver's side Built-in grease zerks in the head make routine maintenance easy Durable and corrosion-resistant, powder coated, cast iron components System includes head assembly, adjustable shank, hitch ball, hydraulic pump and cylinder, load bar assembly, and all necessary hardware Made in the USA Specs: Tongue weight: 600 lbs - 1,600 lbs Maximum gross towing weight: 16,000 lbs Application: 2" x 2" Trailer hitch receivers rated for use with weight distribution systems Fits trailer frame height of 5" or 6" Compatible with tow vehicles with or without an auto-leveling system Ball size: 2-5/16" Maximum drop: 1-1/8" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin hole to center of adjustment holes 6" From center of hitch pin hole to front of shank Total height adjustment along shank: 10-1/2" Overall height: 8-3/4" Head adjusts in 3-1/2" increments Space between load bars: 6-1/2" Weight of load bar assembly: 20 lbs Weight of system head: 35 lbs Limited lifetime warranty Notes: The B&W Continuum cannot be used with surge-type trailer brakes.
Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is designed for lifted trucks.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Sway control keeps your trailer from getting pushed off course Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Grease zerks make maintenance easy Powder coated steel is durable and corrosion resistant Includes head assembly with ball, shank, spring bars, brackets, handle, and necessary hardware Hitch ball is torqued to proper specifications Deep-drop shank is designed for lifted trucks Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Works with traditional and underslung couplers Tongue weight range: 400 lbs - 800 lbs Gross towing weight: 8,000 lbs Total height adjustment along shank: 8-1/2" Maximum trailer frame height: 7" Sway control bracket positioning: 24-1/2" - 27-1/2" back from center of coupler Hitch ball: 2-5/16" Ball shank diameter: 1-1/4" Limited lifetime warranty Included w/ RP94FR Required - Sold Separately Optional Add-Ons Weight Distribution Head 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Deep-drop adjustable shank 2-5/16" Hitch Ball Necessary Installation Hardware n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Get the most out of your TorkLift SuperHitch Magnum dual-receiver trailer hitch with this heavy-duty weight distribution system. Adjustable collar-style chain brackets and hydraulic assist make setup a snap. Hitch ball and shank sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Works exclusively with your SuperHitch Magnum dual-receiver trailer hitch (sold separately) Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Hydraulic-assist jack makes connecting spring bars a snap Removes the danger of manually snapping up highly tensioned bars Desired head tilt is achieved with easy-to-adjust, square spacers Pre-drilled holes in hitch head let you install a friction sway control (sold separately) on either side Sturdy, round spring bars attach like trunnion bars Provides more ground clearance than the standard round bars Convenient, adjustable brackets let you easily clear obstacles on your frame Clamp or bolt chain brackets to your trailer frame with the included hardware Slide the adjustable collar along the spring bar and tighten the built-in hex bolt to secure it in place Accommodates frame-mounted obstacles like battery boxes, tool boxes, or generators Grease zerks make maintenance easy Powder coated steel resists corrosion System includes head assembly, spring bars, brackets and chains, hydraulic jack with handle, and necessary hardware Adjustable shank (LM9010 or TLM9011) and hitch ball with 1-1/4" shank sold separately Made in the USA Specs: Application: TorkLift SuperHitch Magnum dual-receiver trailer hitches Tongue weight: 1,500 lbs - 3,000 lbs Maximum gross towing weight: 30,000 lbs Hitch ball hole diameter: 1-1/4" Lifetime warranty Included w/ TLWD1000 Required - Sold Separately Optional Add-Ons System Head Chain Brackets Spring Bars Adjustable Shank (TLM9010 or TLM9011) Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
... The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Torqued Chrome Hitch Ball Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Bar-Style Friction Sway Control Unit n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
... This system evenly spreads out your tongue weight for a smoother ride. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Sway control keeps your trailer from getting pushed off course Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Comptible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Powder coated steel is durable and corrosion resistant Includes head assembly, adjustable shank, spring bars, brackets, handle, and necessary hardware Hitch ball sold separately - requires 1-1/4" diameter shank Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 800 lbs - 1,200 lbs Gross towing weight: 12,000 lbs Sway control bracket positioning: 27" - 30" back from center of coupler Maximum trailer frame height: 6" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 6-1/4" Maximum drop: 2-3/4" Overall height: 8-1/2" Holes are spaced 1-1/4" apart on center From the center of the pin hole to the center of the ball: 12" 10-Year warranty Included w/ System Required - Sold Separately Optional Add-Ons Weight Distribution Head 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Necessary Installation Hardware Hitch Ball w/ 1-1/4" Diameter Shank n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
... The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head 2-5/16" Torqued Chrome Hitch Ball Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Bar-Style Friction Sway Control Unit n/a n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Hey Peter, the Reese Pro Bar part #RE34FR would work great for your 2021 Little Guy Mini Max and your Grand Highlander. This has the proper tongue weight rating for your trailer and as long as you are backing up mostly straight you can leave the bars…
Hey Joe, I believe that the Reese weight distribution part #RE34FR is perfect for your setup. This has a tongue weight range of 200 to 600 lbs which should be ideal for your towing setup. You did mention the weight in the bed of your truck but only…
To add a trailer hitch to your 2021 Geo Pro 19FBS, I recommend the Curt Adjustable Trailer Hitch Receiver item #C13701. There are no custom fit hitches for trailers but this universal one is the best option for you. It fits frames up to 51" wide…
The best aftermarket brake controller you can buy is the Tekonsha Prodigy P3 Trailer Brake Controller item #90195 which will outperform the factory brake controller tenfold. The Tekonsha Prodigy P3 is extremely reliable and even if something were to…
I have attached the complete written manual below for the Tekonsha Primus IQ Trailer Brake Controller #TK90160 that you can use for reference. As long as everything is wired correctly the brake controller should detect your Cougar Camper as soon as…
The brake wire providing voltage is wired in parallel, with one lead from each magnet being grounded to the trailer frame. We have a great Wiring Help Page that shows a diagram, I will provide a link to it below.
There are a number of high-quality weight distribution hitches that will work with a 400 lb tongue weight such as the Equal-i-zer #EQ37060ET, which is rated for total tongue weights between 300 and 600 lbs. However, in order to choose the best weight…
The Equal-I-zer Weight Distribution System #EQ37060ET does include hitch ball #EQ91-00-6080. It is required to be torqued down to spec according to the owner's manual. You'll need a 1-7/8 inch socket.
Yes, the Equal-i-zer Weight Dist Shank #EQ90-02-4900 will work with the Replacement Head for Reese Weight Distribution System #RP58112. Since this Reese weight distribution system does not use stacked washers for changing the angle of the ball mount…
The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop - 600 to 1,600 lbs TW #EQ90-02-4900 is a great option for a hitch with a 2-1/2 inch receiver and it will step down to fit the e2 system you have perfectly. This shank…
The RedArc Tow-Pro Elite #RED44FR is comparable in reliability and performance to the Tekonsha Prodigy P3 #90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the…
For proportional brake controllers degrees refers to the range it can be mounted at and still function. The #TK90160 has a 70 degree mounting range (see pic), and the P2 #90885 has a 360 degree mounting range (see second pic). As long as you are…
Built-in, active sway control keeps your trailer in line using a system of spring-loaded ball bearings and steel-on-steel friction. System head is adjustable so you can easily achieve the proper tilt. Hitch ball sold separately.Work through the positions in order until the correct tilt setting is determined. Once your tow vehicle is level, use the oval-shaped washers in conjunction with the shank bolts to secure the head to the shank in the desired position. Why Use a Weight Distribution Hitch?
Restore stability and control in your ride so you can tow to the max capacity of your hitch. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built to be easily upgraded for sway control Add on an optional bar-style friction sway control kit (17200 - sold separately) Desired head tilt is achieved with traditional washer design Add or remove washers from spacer rivet to tilt head up or down Round spring bars are constructed of solid, forged steel for strength and durability Powder coated steel resists corrosion Grease zerks in the head assembly make for simple maintenance Includes head assembly, adjustable shank, spring bars, lift brackets, lift chains, handle, and all necessary hardware Hitch ball with 1-1/4" diameter shank sold separately Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 500 lbs - 600 lbs Maximum gross towing weight: 6,000 lbs Lift bracket positioning: 31-3/16" back from center of coupler Shank length: 12" Maximum rise: 6" Maximum drop: 2-1/2" 1-Year limited warranty Included w/ System Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift Brackets Spring Bars Lift Bar Hitch Pin and Clip Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable 2" shank included.The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Selecting a Weight Distribution System The tongue weight rating is the most important factor in determining which size weight distribution system you should use.
The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is easily adjustable. 2-5/16" Ball and 2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a more level ride for both tow vehicle and trailer Super-quiet sway control works without noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy to achieve with the pump of a pressurized handle Keep track of the psi setting to recreate your perfect tow setup every time you hit the road Make adjustments on-the-fly, even on the side of the road Get more leverage when pumping at higher pressure levels by extending the handle Huge tongue weight range can handle almost anything Grows with you as you upgrade to larger trailers and campers Uses flexible load bars that support light and heavy loads alike Fast and easy setup every time Preset pitch in the system head means it's always ready to go - no need to adjust No more circling your trailer to snap spring bars into place - single-piece load bar assembly can be set up entirely from driver's side Built-in grease zerks in the head make routine maintenance easy Durable and corrosion-resistant, powder coated, cast iron components System includes head assembly, adjustable shank, hitch ball, hydraulic pump and cylinder, load bar assembly, and all necessary hardware Made in the USA Specs: Tongue weight: 600 lbs - 1,600 lbs Maximum gross towing weight: 16,000 lbs Application: 2" x 2" Trailer hitch receivers rated for use with weight distribution systems Designed for use on trailers with bottom-mounted couplers Fits trailer frame height of 5" or 6" Compatible with tow vehicles with or without an auto-leveling system Ball size: 2-5/16" Maximum drop: 1-1/8" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin hole to center of adjustment holes 6" From center of hitch pin hole to front of shank Total height adjustment along shank: 10-1/2" Overall height: 8-3/4" Head adjusts in 3-1/2" increments Space between load bars: 6-1/2" Weight of load bar assembly: 20 lbs Weight of system head: 35 lbs Limited lifetime warranty Notes: The B&W Continuum cannot be used with surge-type trailer brakes.
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built-in sway control stops trailer sway before it begins Maintains tension throughout the entire system Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Compatible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Chromoly steel spring bars offer superior dexterity for a controlled, even ride without the bounce Dipped steel construction is durable and corrosion resistant System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, hitch ball, pin and clip, and all necessary hardware 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 200 lbs - 600 lbs Gross towing weight: 6,000 lbs Ball size: 2-5/16" Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 6" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 7" Maximum drop: 3" Overall height: 9-1/2" Holes are spaced 1-1/4" apart on center Spring bar dimensions: 36" long x 1-1/4" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-0600 Equal-i-zer Weight Distribution Hitch Weight Distribution Shank Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Hitch Pin and Clip Necessary Installation Hardware n/a Thin Walled Socket for Installation of Hitch Ball Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank and pre-attached, pre-torqued 2-5/16" ball included.The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Selecting a Weight Distribution System The tongue weight rating is the most important factor in determining which size weight distribution system you should use.
Rigid brackets on this weight distribution hitch provide steel-on-steel friction to help keep your trailer in line. This corrects sway for a smooth ride. Adjustable shank and 2-5/16" hitch ball included. ... The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Selecting a Weight Distribution System The tongue weight rating is the most important factor in determining which size weight distribution system you should use.
The Continuum is so quiet, you just might forget you have it. No more snapping bars up onto noisy brackets. Easy to install, distributes weight with precision, controls sway, and is easily adjustable. 2-5/16" Ball and 2-1/2" shank included.Features: Evenly distributes weight over axles of tow vehicle and trailer for stability and control Creates a more level ride for both tow vehicle and trailer Super-quiet sway control works without noisy brackets or add-on sway bars No screeching steel or popping brackets Silent friction sway control inside hitch head helps hold trailer steady at connection point Perfect weight balance is easy to achieve with the pump of a pressurized handle Keep track of the psi setting to recreate your perfect tow setup every time you hit the road Make adjustments on-the-fly, even on the side of the road Get more leverage when pumping at higher pressure levels by extending the handle Huge tongue weight range can handle almost anything Grows with you as you upgrade to larger trailers and campers Uses flexible load bars that support light and heavy loads alike Fast and easy setup every time Preset pitch in the system head means it's always ready to go - no need to adjust No more circling your trailer to snap spring bars into place - single-piece load bar assembly can be set up entirely from driver's side Built-in grease zerks in the head make routine maintenance easy Durable and corrosion-resistant, powder coated, cast iron components System includes head assembly, adjustable shank, hitch ball, hydraulic pump and cylinder, load bar assembly, and all necessary hardware Made in the USA Specs: Tongue weight: 600 lbs - 1,600 lbs Maximum gross towing weight: 16,000 lbs Application: 2-1/2" x 2-1/2" Trailer hitch receivers rated for use with weight distribution systems Fits trailer frame height of 5" or 6" Compatible with tow vehicles with or without an auto-leveling system Ball size: 2-5/16" Maximum drop: 3-1/2" Maximum rise: 9-3/8" Shank length: 6-3/8" From center of hitch pin hole to center of adjustment holes 6" From center of hitch pin hole to front of shank Total height adjustment along shank: 10-1/2" Overall height: 8-3/4" Head adjusts in 3-1/2" increments Space between load bars: 6-1/2" Weight of load bar assembly: 20 lbs Weight of system head: 35 lbs Limited lifetime warranty Notes: The B&W Continuum cannot be used with surge-type trailer brakes.
The Equal-i-zer has a reputation as strong as its American-made steel. We love this hitch's solid build quality and that it helps to proactively stop trailer sway instead of just dampening it after it starts. Ball and shank included.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built-in sway control stops trailer sway before it begins Maintains tension throughout the entire system Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Compatible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Chromoly steel spring bars offer superior dexterity for a controlled, even ride without the bounce Dipped steel construction is durable and corrosion resistant System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation Made in the USA Specs: Fits: 2-1/2" x 2-1/2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 1,200 lbs - 1,600 lbs Gross towing weight: 16,000 lbs Ball size: 2-5/16" Sway control bracket positioning: 27" - 32" back from center of coupler Maximum trailer frame height: 8" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 6" Maximum drop: 3" Overall height: 9-1/2" Holes are spaced 1-1/4" apart on center Spring bar dimensions: 35-1/2" long x 1-1/2" wide Limited lifetime warranty Included w/ System Required - Sold Separately Optional Add-Ons 90-00-1600 Equal-i-zer Weight Distribution Hitch Weight Distribution Shank Weight Distribution Head 2-5/16" Chrome Hitch Ball 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Hitch Pin and Clip Necessary Installation Hardware n/a Thin Walled Socket for Installation of Hitch Ball Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
... This system evenly spreads out your tongue weight for a smoother ride. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Sway control keeps your trailer from getting pushed off course Holds your trailer in line with rigid, frame-mounted brackets Uses steel-on-steel friction to combat any sway that occurs Comptible with surge-type brake actuators Desired head tilt is achieved using stackable washers Add or remove washers from the spacer rivet in the hitch head No-drill, clamp-on brackets can be adjusted along your trailer frame Accommodates frame-mounted items such as gas tanks, battery boxes, tool boxes, or generators Powder coated steel is durable and corrosion resistant Includes head assembly, adjustable shank, spring bars, brackets, handle, and necessary hardware Hitch ball sold separately - requires 1" diameter shank Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: up to 450 lbs Gross towing weight: 4,500 lbs Sway control bracket positioning: 27" - 30" back from center of coupler Maximum trailer frame height: 6" Shank length: 8" From center of hitch pin hole to center of adjustment holes 9" From center of hitch pin hole to front of shank 7" From center of hitch pin hole to back of shank 12" Overall Total height adjustment along shank: 7-1/2" Maximum rise: 6" Maximum drop: 2" Overall height: 6-1/2" Holes are spaced 1-1/4" apart on center 10-Year warranty Included w/ System Required - Sold Separately Optional Add-Ons Weight Distribution Head 2 Sway Control Brackets 2 Spring Bars Snap-up Lever Spacer Rivet and Washers Necessary Installation Hardware Hitch Ball w/ 1" Diameter Shank n/a Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
Perfect for your short-tongue trailer, this heavy-duty weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Accomodates your short-tongue trailer with bars that are shorter than those in standard systems Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Built to be easily upgraded for sway control Add on an optional bar-style friction sway control kit (17200 - sold separately) Desired head tilt is easily achieved using 2 set screws to pivot the system - no more piling on washers Tilt the hitch ball away from your tow vehicle to add more tension Trunnion spring bars are constructed of solid, forged steel for strength and durability Powder coated steel resists corrosion Includes head assembly, adjustable shank, spring bars, lift brackets, lift chains, handle, and all necessary hardware Hitch ball with a 1-1/4" diameter shank sold separately Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems Tongue weight: 800 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Spring-bar length: 28-3/8" Shank length: 12" Maximum rise: 7-3/4" from top of hitch receiver opening Maximum drop: 1/2" from top of hitch receiver opening 1-Year warranty Included w/ C17332 Required - Sold Separately Optional Add-Ons Adjustable Shank System Head Lift Brackets Spring Bars Hitch Ball w/ 1-1/4" Diameter Shank Bar-Style Friction Sway Control Pro Tip: Before you invest in a weight distribution hitch, make sure your cargo is evenly loaded in your trailer to keep the weight balanced.
If your trailer breaks away from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.Mounts on Your Trailer Frame: Fits anywhere you have space and wires directly to the actuator. Top Loading: Lift the lid for quick access - no need to unbolt or remove the box. Works With Deutsche Hydrapro Systems: Compatible with Alpha G1000 and G1600 actuators.
A light trailer shouldn't keep you on edge. This lightweight True Tow hitch helps your truck and trailer settle level with live adjustment and built-in anti-sway, so towing feels steadier and more predictable.Highlights Lightweight True Tow Design: Streamlined build keeps handling manageable without giving up proper weight distribution. Live Adjustment Built Into the Head: Dial in your setup at the hitch so your trailer settles level before you roll. Dual Friction Anti-Sway Control: Two built-in friction points help steady your trailer in wind and passing traffic.
When your truck sits a little higher and the trailer doesn't feel settled, the drive can wear on you. This lightweight True Tow hitch uses live adjustment and built-in anti-sway to help your setup level out and track more steadily.Highlights Lightweight True Tow Design: Streamlined build keeps handling manageable without giving up proper weight distribution. Live Adjustment Built Into the Head: Dial in your setup at the hitch so your trailer settles level before you roll. Dual Friction Anti-Sway Control: Two built-in friction points help steady your trailer in wind and passing traffic.
... When your truck sits a little higher and the trailer doesn't feel settled, the drive can wear on you. This lightweight True Tow hitch uses live adjustment and built-in anti-sway to help your setup level out and track more steadily.Once dialed in, the trailer settles into a level stance, steering feels more planted, and sway is kept in check when wind or traffic conditions change. Adjustments That Happen Right at the Hitch Live adjustment is integrated into the head assembly, letting you fine-tune your setup without disconnecting or starting over.
... A light trailer shouldn't keep you on edge. This lightweight True Tow hitch helps your truck and trailer settle level with live adjustment and built-in anti-sway, so towing feels steadier and more predictable.Lightweight True Tow Design: Streamlined build keeps handling manageable without giving up proper weight distribution. Live Adjustment Built Into the Head: Dial in your setup at the hitch so your trailer settles level before you roll. Dual Friction Anti-Sway Control: Two built-in friction points help steady your trailer in wind and passing traffic. 4" Drop for Your Stock-Height Truck: Helps keep your trailer level behind your standard-height truck.
When your truck sits a little higher and the trailer doesn't feel settled, the drive can wear on you. This lightweight True Tow hitch uses live adjustment and built-in anti-sway to help your setup level out and track more steadily.Highlights Lightweight True Tow Design: Streamlined build keeps handling manageable without giving up proper weight distribution. Live Adjustment Built Into the Head: Dial in your setup at the hitch so your trailer settles level before you roll. Dual Friction Anti-Sway Control: Two built-in friction points help steady your trailer in wind and passing traffic.
... Towing a mid-size trailer should feel steady, not tense. This lightweight True Tow hitch helps your truck and trailer settle into balance with live adjustment and built-in anti-sway, so your drive feels calmer and more predictable.Lightweight True Tow Design: Streamlined build keeps handling manageable without giving up proper weight distribution. Live Adjustment Built Into the Head: Dial in your setup at the hitch so your trailer settles level before you roll. Dual Friction Anti-Sway Control: Two built-in friction points help steady your trailer in wind and passing traffic.
Filters
