This gasket fits snugly beneath the flange on your Optronics UCL09 Series flange-mount trailer utility light to create a weathertight seal. Black foam construction.Features: Gasket for Optronics UCL09 Series flange-mount trailer utility lights Weathertight seal - gasket fits snugly under mounting flange Black foam construction 3-1/4" Diameter
Closed foam cell gasket provides a weather tight seal when mounting your Optronics MCL17 series clearance or side marker lights.Features Foam gasket provides a weather tight seal when mounting your Optronics MCL17 series clearance or side marker light Fits MCL17AB or MCL17RB Durable closed cell foam construction
Rubber mounting gasket protects mounting surface when installing a Peterson Pirhana LED trailer clearance and marker light. Fits Peterson 169A and 169R lights (sold separately).Features: Rubber mounting gasket protects mounting surface when installing a Peterson Pirhana LED trailer clearance and marker light Fits Peterson 169A and 169R lights (sold separately) Provides additional shock absorption to extend life of light Surface mount design - light snaps into gasket for mounting Specs: Dimensions: 4-1/4" long x 1-1/4" tall Distance between mounting holes (center on center): 3"
This foam gasket provides a weather tight seal when mounting your Optronics MCL76 series clearance or side marker lights.Features: Foam gasket provides a weather tight seal when mounting your Optronics MCL76 series clearance or side marker light Fits MCL76AB and MCL76RB - both sold separately Durable closed cell foam construction
Replaces the mounting gasket for your Command Electronics Hot-Line LED backup light (328-003-6017W). Includes pressure sensitive adhesive on one side of the mounting gasket for secure installation.Features: Replaces the mounting gasket for your Command Electronics Hot-Line LED backup light (328-003-6017W) Includes pressure sensitive adhesive on one side of the mounting gasket for secure installation
5-7/16" Diameter x 1/16" deep; black rubber gasket; mounts beneath 4" round lightsFeatures: Black rubber gasket for 4" round lights Snug fit beneath flange 5-7/16" Diameter by 1/16" deep Black rubber gasket fits beneath flange of 4" round flange-mount lights.
Replaces the mounting gasket for your 4" diameter round Peterson trailer light. Fits Peterson 411SC and M411C back-up trailer lights.Features: Replaces the mounting gasket for your 4" diameter round Peterson trailer light Fits Peterson 411SC and M411C back-up lights Also fits Optronics BU41CB Helps create a weathertight seal when installing the light Quantity: 1 gasket Manufacturer Cross Reference Light will work as an exact replacement for: Optronics # A42GBP
Rubber mounting gasket protects mounting surface when installing a Peterson Pirhana LED trailer clearance and marker light. Fits Peterson 168A and 168R lights (sold separately).Features: Rubber mounting gasket protects mounting surface when installing a Peterson Pirhana LED trailer clearance and marker light Fits Peterson 168A and 168R lights (sold separately) Provides additional shock absorption to extend life of light Surface mount design - light snaps into gasket for mounting Specs: Dimensions: 2-13/16" long x 1" tall Distance between mounting holes (center on center): 1-15/16"
2-9/16" L x 1-1/8" W x 1/16" D; foam gasket for MCL13 Series LED lights; provides weathertight sealFeatures: Use this foam gasket for MCL13 Series sealed marker and clearance lights Provides weathertight seal Measures 2-9/16" long x 1-1/8" wide x 1/16" deep Gasket provides weathertight seal for MCL13 series LED lights.
Butterfly vent and gasket for Polar roof ventilator (PLR24) Aluminum Vent and gasket diameter: 7-1/4" 24-004 Aluminum Grille and Gasket for Polar Roof Ventilator
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo tail light is bright and easy to see, day or night Inner ring glows for tail light Outer ring flashes for turn signal and brightens for brake light Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surface mount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
Conquer dark roads and rough terrain with these high-performance fog lights. Engineered for maximum brightness with SAE/DOT compliance, they provide a direct swap for factory fog lamps on your vehicle. Simple plug-and-play installation.Built for Harsh Environments The IP69K waterproof housing protects against high-pressure water and dust intrusion. Made with polycarbonate lenses, aluminum casting, rubber gaskets, and nylon SLS for maximum durability. Plug-and-Play Installation Includes a Deutsch DT input connector and a wiring harness that connects directly to your vehicles factory fog light wiring for a hassle-free setup.
7-1/8" Diam x 2-3/16" D; Weather-tight seal w/gasket; replaceable lens and bulb; surface mount on 6-1/4" centers; 1-wire; 1-bulb incandescentThe light includes a gasket for a weathertight seal against the elements. The light features a replaceable, screw-down lens and easy-to-replace bulb.
Bright, efficient, engineered in the USA LED solutions durable, waterproof lighting for trucks, trailers, emergency rigs, boats designed for performance and peace of mind.
Street-legal LED fog lights produce 3,000 lumens of dispersed white light for your vehicle. Aluminum housing with black powder coat is corrosion resistant. Includes foam mounting gasket, hardware, and wiring harness.Features: Flush mount fog lights deliver bright white light to help navigate in inclement weather 95-Degree wide beam is created by TIR projector lenses Street-legal pods are SAE J583 certified for use on all roadways High-quality light output from (4) 5-watt Osram Olson LEDs Black powder coated aluminum housing and brackets are corrosion resistant IP67-rated to protect against dust and moisture Compact light mounts to bumper or other flat surface Foam gasket ensures proper seal and snug fit Wiring harness with rocker switch makes installing your light pods and light bars easier Supports lights up to 90-watts each - 180 watts maximum Includes 2 triple-sealed Deutsch DT connectors, rocker switch, HID relay, and lead wire with fuse and ring terminals Kit includes 2 cube LED pods, 2 foam gaskets, mounting hardware, and wiring harness Specs: Quantity: 2 pods Overall dimensions: 3-1/2" tall x 3-1/2" wide x 2-5/8" thick Total diodes: 8 4 Diodes per light Wattage: 20 watts 5 Watts per LED Power draw: 1.5 amps 3-Year warranty for lights 2-Year warranty for wiring harness Note: Please review your states guidelines regarding the use of auxiliary lighting on roadways.
2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Quantity: 1 license plate light Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at 12.8V: 0.027 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 61501 Peterson # M434
2-1/2" Round. Low-profile LED trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount with included gasket - hardware not included. 2-Wire design. ... Features: Round trailer light can function as either a clearance or side marker light Built-in reflex reflector eliminates the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate snap-on lens and black ABS housing Amber lens over white LED Compatible with 12V DC systems Surface mount to trailer - hardware not included Attached gasket helps create a weathertight seal 2-Wire pigtail hardwires into trailer P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 clearance/marker light Dimensions: 2-1/2" diameter x 15/16" thick Diodes: 1 Power draw at 12V: 0.073 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
2-1/2" Round. Low-profile LED trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount with included gasket - hardware not included. 2-Wire design. ... Features: Round trailer light can function as either a clearance or side marker light Built-in reflex reflector eliminates the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate snap-on lens and black ABS housing Red lens over white LED Compatible with 12V DC systems Surface mount to trailer - hardware not included Attached gasket helps create a weathertight seal 2-Wire pigtail hardwires into trailer P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 clearance/marker light Dimensions: 2-1/2" diameter x 15/16" thick Diodes: 1 Power draw at 12V: 0.073 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
7" Diameter round. 3-Function, waterproof transit light acts as brake, tail, and turn signal light. Durable polycarbonate housing and lens. Surface mount with mounting gasket (sold separately). 3-Wire design.Features: Round LED trailer transit light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over clear LEDs Compatible with 12V DC systems Surface mount to trailer with included mounting gasket 3-Wire design hardwires to trailer Specs: Dimensions: 7" diameter x 1-7/16" thick Distance between mounting holes (center on center): 6-1/4" Power draw at 12.8V: Stop/Turn Signal: 0.243 amps Tail light: 0.046 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # LED7007R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-9/16" x 1-1/4" Rectangle. Incandescent trailer light illuminates your license plate when properly mounted. Durable chrome-plated housing. Gasket helps create a weathertight seal. Surface mount to trailer. 2-Wire design. (1) 194 bulb.Features: Incandescent light illuminates your trailers license plate when properly mounted Durable chrome-plated housing provides a clean look Incandescent bulb is easy to replace Clear lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Foam gasket helps to create a weathertight seal 2-Wire design includes power lead and ground wire Specs: Dimensions: 2-9/16" long x 1-1/4" wide x 1" thick Distance between mounting holes (center on center): 2" Bulb type: 194 Power draw at 12.8V: 0.261 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 60151 Peterson # M434 Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
2-3/4" x 1-3/8" Rectangle. Mini LED trailer light illuminates your license plate. Durable ABS housing protects light against road debris. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Surface-mounted diodes (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black ABS housing protects light against road debris and corrosion Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at: 12.8V: 0.139 amps 24V: 0.027 amps Lifetime warranty on LEDs
7" LED turn signal and parking light seals out moisture with the included weathertight gasket. Hardwires to your truck or bus, and mounts on the surface.Features: Round turn signal/parking light Brightens for parking light Flashes for turn signal Weather resistant Included gasket creates weathertight seal LEDs with amber lens More efficient and durable than incandescent bulbs Surface mount Hardware not included 3-Wire pigtail hardwires to truck or bus Specs: Dimensions: 7" diameter x 1-7/16" thick Distance between mounting holes: 6-1/4" Compatible with 12V DC systems Diodes: 31 Power draw at 12.8 volts: Turn signal light: 0.564 amps Parking light: 0.080 amps Lifetime warranty on LEDs Manufacturer Cross Reference Uni Bond # LED7007A
Filters
