When you tow your jetski, this stone guard does the hard work for you. It deflects stones, debris, and saltwater using a stainless steel frame and heavy duty mesh, helping protect gel coat surfaces with an easy, drill free install.Features: Stone guard protects your jetski and PWCs while towing Advanced stone chip protection shields delicate gel coat surfaces from stones, debris, and saltwater Prevents chips, scuffs, and erosion of the gel coat that can reduce resale value Proprietary, heavy-duty double weave PVC mesh Angled, adjustable panels can be angled to fit most PWC trailers for a snug, aerodynamic fit Removable covers are easy to clean or replace, minimizing upkeep Marine-grade, stainless steel frame engineered to hug your PWC's profile securely High-grit finish performs in the most extreme marine environments and weather conditions Designed and tested under rugged conditions to deliver long-lasting protection Easy, drill-free installation makes it a practical and reliable upgrade for frequent travelers Heavy-duty galvanized U-bolt specifically designed to securely hold the A-frame safely Specs: Dimensions: 4'7" wide x 1'8" tall Certifications: Salt spray test ASTM B117 Stone chip resistance test ASTM D3170 Thermal cycle test IEC 60068-2 Vibration test ISO 16750-3:2007 ADR compliance 13/00 - VSB 1 General safety ADR 42 3-Year warranty
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 5' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 60" Width: 4" Height: 2" Weight: 12.62 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 3' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 36" Width: 4" Height: 2" Weight: 8.5 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 4' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 48" Width: 4" Height: 2" Weight: 12.28 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
Lightweight aluminum trailer has 2 levels of storage so you can haul all your gear, including fishing kayaks, cargo boxes, bikes, and even a rooftop tent. Crossbars have top channels for mounting accessories. ... Features: Lightweight trailer has 2 levels of storage so you can easily haul all your gear Heavy-duty crossbars on the top level let you attach mounts for bikes, skis, kayaks, cargo carriers, or even a rooftop tent Built-in tie-down points on endcaps make it easy to secure equipment and gear Bottom level accepts clamp-on accessories - perfect for longer kayaks, cargo carriers, fishing poles, and coolers Shock absorbers cushion your equipment against vibrations caused by rough roads Trailer easily converts for use as a handcart Built-in handle lets you maneuver the trailer closer to the water's edge and helps when hitching up to your vehicle Submersible tail lights and side markers increase safety and visibility while towing Foldable tongue and kickstand makes storing the trailer simple Durable aluminum construction with powder coat resists rust and corrosion Powder coated aluminum wheels have DOT compliant tires Assembly required - includes hardware, brackets, wiring, and safety chains 4-Way flat trailer plug connects to vehicle Available accessories expand trailer capabilities SpareTire kit (Y08125 - sold separately) makes sure you always have a spare on hand TentKit (Y08127 - sold separately) converts your trailer into a stand-alone platform for a rooftop tent Specs: Weight capacity: 500 lbs Upper bars: 350 lbs Maximum boat size: 19' Maximum crossbar spread: 60" Crossbar diameter: 2" Dimensions: 14-1/2' long x 79-3/4" wide x 41-1/4" tall Coupler height: 16" Coupler ball size: 2" Trailer tongue dimensions: 2" x 3" Wheel dimensions: 12" diameter x 5-5/16" wide Wheel bolt pattern: 4 on 4" Tire size: 5.30-12 (135/90-12) Tire capacity Load range: C Maximum load: 1,050 lbs at 80 PSi Tire brand: Ultra-Runner by Apexway Speed rating: 75 mph Trailer weight: 175 lbs Limited 1-year warranty Maximum Length for Kayaks on Bottom Deck Note: Your local municipality requires you to register your trailer with the DMV.
Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Curt 7-way connector to 4-way or 5-way flat connector is designed for use on vehicles with Trailer Lamp-Out sensors when towing a trailer equipped with LED lights.Features: 7-Way RV style adapter to 4-pole and 5-pole flat trailer connectors Designed for use on vehicles with Trailer Lamp-Out sensors - such as Audi, Mercedes-Benz, Porsche, and Volkswagen vehicles with the factory tow package Plugs into a 7-way connector on the vehicle and 4-way or 5-way flat connector on the trailer 1-Year limited warranty
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (not included). Accepts standard 1-prong or 2-prong plug. ... Features: Dual-face LED trailer light installs on your trailer fender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with bracket (A65B - sold separately) Accepts industry standard 1-prong or 2-prong plug P2 rated Specs: Quantity: 1 fender light Dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses.Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on right fender (passenger's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Width including lights: 2-1/8" Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses.Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on left fender (driver's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Upgrading from drum brakes? This DeeMaxx tandem-axle kit gives you hydraulic disc stopping power with Maxx-coated 13" hub/rotors, a 1,600 psi electric-over-hydraulic actuator, and flexible brake lines designed to work together.A 360-degree brake line fitting allows flexible mounting. Flexible Brake Line Kit For Tandem Trailers The included tandem-axle hydraulic brake line kit features DOT- and SAE-compliant rubber hoses that are easier to route than rigid steel lines.
Upgrading from drum brakes? This DeeMaxx tandem-axle kit gives you hydraulic disc stopping power with Maxx-coated 12" hub/rotors, a 1,600 psi electric-over-hydraulic actuator, and flexible brake lines designed to work together.A 360-degree brake line fitting allows flexible mounting. Flexible Brake Line Kit For Tandem Trailers The included tandem-axle hydraulic brake line kit features DOT- and SAE-compliant rubber hoses that are easier to route than rigid steel lines.
Upgrading from drum brakes? This DeeMaxx tandem-axle kit gives you hydraulic disc stopping power with Maxx-coated 10" hub/rotors, a 1,600 psi electric-over-hydraulic actuator, and flexible brake lines designed to work together.A 360-degree brake line fitting allows flexible mounting on the trailer frame or inside a compartment. Flexible Brake Line Kit For Tandem Trailers The included 20-foot hydraulic brake line kit is designed for tandem-axle trailers with disc brakes.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 4 Disc brake end kits Hub-and-rotor assemblies Grease seals, races and bearings Grease caps (F001526) available separately Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for tandem-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic tandem-axle brake line kit (1) 15' Long brake line with 3/8"-24 inverted flare nuts (1) 6' Long brake line with 3/8"-24 inverted flare nuts (2) 4-1/4' Long brake lines with 3/8"-24 inverted flare nuts (4) 18" Male/male rubber flex lines (1) 3/16" Brass T-fitting (2) 3/16" Brass union fittings (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Get 4 rust-resistant hub-rotor assemblies - complete with inner (25580) and outer (15123) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller. Includes lines and fittings.Features: Complete kit upgrades your trailer to disc brakes for better performance Consistent stopping even at highway speeds Shorter stopping distance than drum brakes 4 Dacromet-coated disc brake end kits Hub-rotor assemblies include bearings, race, seals, and grease caps Calipers with mounting brackets and hardware Electric-over-hydraulic brake actuator activates the trailer brakes when you apply the brakes in your tow vehicle Installs on trailer frame and connects to trailer's wiring and includes brake lines Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for tandem-axle trailers Specs: Axle capacity: 6,000 lbs Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Grease seal Inner diameter: 2.25" Outer diameter: 3.376" Complete Kit Includes: Electric-over-hydraulic trailer brake actuator 6K disc brake kit with hub-and-rotor assemblies, calipers, bearings, grease caps, and grease seals Hydraulic tandem-axle brake line kit (1) 188" Long brake line with 3/8"-24 inverted flare nuts (1) 76" Long brake line with 3/8"-24 inverted flare nuts (2) 48" Long brake line with 3/8"-24 inverted flare nuts (4) 21" Male/male rubber flex lines with 3/8"-24 inverted flare nuts (1) 3/8" Brass T-fitting (1) 3/8" Brass 4-way-fitting (1) 3/8" Brass union fitting 1/2" Nylon hose clamps 1/4" Nylon hose clamps Self-tapping screws Disc Brakes are Better Than Drum Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 13" from trailer Made in the USA Specs: Quantity: 2 boat guide-ons Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Steel post diameter: 1-1/2" PVC post diameter: 2-3/8" Overall height: 40" Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Get 4 rust-resistant hub-rotor assemblies - complete with inner (L68149) and outer (L44649) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller. Includes lines and fittings.Features: Complete kit upgrades your trailer to disc brakes for better performance Consistent stopping even at highway speeds Shorter stopping distance than drum brakes 4 Dacromet-coated disc brake end kits Hub-rotor assemblies include bearings, races, seals, and grease caps Calipers with mounting brackets and hardware Electric-over-hydraulic brake actuator activates the trailer brakes when you apply the brakes in your tow vehicle Installs on trailer frame and connects to trailer's wiring and includes brake lines Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for tandem-axle trailers Specs: Axle capacity: 3,500 lbs Bolt pattern: 5 on 4-1/2" Rotor diameter: 10" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing: L68149 Outer bearing: L44649 Races Inner race: L68111 Outer race: L44610 Grease seal Inner diameter: 1.719" Outer diameter: 2.565" Complete Kit Includes: Electric-over-hydraulic trailer brake actuator 3.5K disc brake kit with hub-and-rotor assemblies, calipers, bearings, and grease seals Hydraulic tandem-axle brake line kit (1) 188" Long brake line with 3/8"-24 inverted flare nuts (1) 76" Long brake line with 3/8"-24 inverted flare nuts (2) 48" Long brake line with 3/8"-24 inverted flare nuts (4) 21" Male/male rubber flex lines with 3/8"-24 inverted flare nuts (1) 3/8" Brass T-fitting (1) 3/8" Brass 4-way fitting (2) 3/8" Brass union fitting 1/2" Nylon hose clamps 1/4" Nylon hose clamps Self-tapping screws Disc Brakes are Better Than Drum Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
... Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.Features: Bunk-style guides support your boat and keep it centered while you're loading it onto your trailer Tilt to accommodate hulls of various sizes Support posts clamp onto top or bottom of trailer frame Mounting brackets allow you to adjust the distance between posts Pre-galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade carpeting lines bunk boards to protect your boat's finish Black color carpeting Made in the USA Specs: Quantity: 2 bunk-style boat guides Application: trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416; sold separately) are required for mounting on frames up to 3" wide x 5-1/4" tall Bunk board dimensions (each): 60" long x 2" wide x 4" tall Post dimensions: 18" tall x 1-1/2" wide Extends out from boat up to 13" Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Get 4 rust-resistant hub-rotor assemblies - complete with stainless steel calipers and inner (25580) and outer (15123) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller. Includes lines and fittings.Features: Complete kit upgrades your trailer to disc brakes for better performance Consistent stopping even at highway speeds Shorter stopping distance than drum brakes Stainless steel calipers are rustproof Mounting brackets and hardware included 4 Dacromet-coated disc brake end kits Hub-rotor assemblies include bearings, races, seals, and grease caps Electric-over-hydraulic brake actuator activates the trailer brakes when you apply the brakes in your tow vehicle Installs on trailer frame and connects to trailer's wiring and includes brake lines Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for tandem-axle trailers Specs: Axle capacity: 6,000 lbs Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Grease seal Inner diameter: 2.25" Outer diameter: 3.376" Complete Kit Includes: Electric-over-hydraulic trailer brake actuator 6K disc brake kit with hub-and-rotor assemblies, bearings, and grease seals Stainless steel calipers Hydraulic tandem-axle brake line kit (1) 188" Long brake line with 3/8"-24 inverted flare nuts (1) 70" Long brake line with 3/8"-24 inverted flare nuts (2) 21" Male/male rubber flex lines with 3/8"-24 inverted flare nuts (1) 3/8" Brass T-fitting (1) 3/8" Brass union fitting 1/2" Nylon hose clamps 1/4" Nylon hose clamps Self-tapping screws Disc Brakes are Better Than Drum Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 1-1/2" Diameter, 16-gauge, pre-galvanized steel tubes mount to trailer frame 2" PVC pipe slides over steel posts Simple installation on rear crossmember of I-beam trailer frame with included I-beam clamps - no drilling required Adjusts out to 19" from trailer Made in the USA Specs: Quantity: 2 boat guide-ons Post height: 75" Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
Filters
