Attach a layer of support when mounting your jack to your A-frame trailer coupler. Fits 2,000-lb to 5,000-lb A-frame jacks. Raw finish with light oil allows for easy welding.Features: Supportplate adds stability to help keep your A-frame trailer jack from leaning Bottom-mounted plate attaches to the underside of your trailer frame Sturdy steel construction Weld-on installation Raw finish for easy welding Specs: Fits jacks with 2-1/4" outer tube diameter Jack hole diameter: 2.29" Weight capacity: 5,000 lbs 1-Year warranty
Bottom SupportPlate for A-Frame Jacks Bottom supportplate for A-frame jacks Unfinished, ready to be welded to underside of trailer Provides extra support, so jack will not lean under load.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Zinc finish resists rust - and looks good! Stabilizing footplate. Keeps jack from sinking into soft ground Built-in grease zerk. Super easy to grease Corrosion-resistant finishes. Keeps your jacks in good working condition Outer tube has black powder coat Inner tube and footplate has clear zinc finish Mounting plates have matte black powder finish and e-coat Here's what else you need to know: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Lift: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Capacity: Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Mounting plates: 3,500 lbs Mounting dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jacks: 1-Year warranty Mounting plates: limited lifetime warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Zinc finish resists rust - and looks good! Stabilizing footplate. Keeps jack from sinking into soft ground Built-in grease zerk. Super easy to grease Corrosion-resistant finishes. Keeps your jacks in good working condition Outer tube has black powder coat Inner tube and footplate has clear zinc finish Mounting plates have matte black powder finish and e-coat Here's what else you need to know: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Overall height: 22-1/4" Retracted 36-1/4" Extended Lift: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/4" Handle radius: 8" Capacity: Lift capacity: Per jack: 3,000 lbs As a pair: 6,000 lbs Support capacity: Per jack 5,000 lbs As a pair: 10,000 lbs Mounting plates: 3,500 lbs Mounting dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jacks: 1-Year warranty Mounting plates: limited lifetime warranty
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Lift: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
We designed this pair so that you can get a swivel jack on your trailer without having to weld it on. The mounting plate bolts on, giving you a lot of freedom to put the jack where you want it.Features: Raises and lowers your trailer Pivots down for use, up for storage, and pins in place Pin tethered to jack so it won't get lost Extends with sidewind handle Zinc finish resists rust - and looks good! Stabilizes with footplate to keep it from sinking in soft ground Maintains easily with built-in grease zerk Bolts on with mounting plate Resists corrosion with quality finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Mounting plate with matte black powder and e-coat Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Lift: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8" Capacity: Lift: 3,000 lbs Support: 5,000 lbs Mounting plate: 3,500 lbs Mount dimensions: Outer diameter: 2" Pin hole diameter: 5/8" Length from plate: 2-1/2" Fits trailer frames with a cross section depth of 3" or less Plate dimensions: 5" wide x 4-1/4" tall x 2" deep Warranty: Jack: 1-Year warranty Mounting plate: limited lifetime warranty
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. ... Features: Stabilizing jack helps keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jack up for travel, down for use Drop leg extends so you can adjust the height Spring-loaded lever releases drop leg for use Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment Large foot provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Mounting hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity: 650 lbs Maximum load the jack can lift Support capacity: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.Features: Scissor jacks level and stabilize 5th-wheel, travel, horse and cargo trailers Heavy-duty worm-gear jacking mechanisms prevent slippage Perfect for stabilizing loads Large footplates provide excellent stability Bolt-on or weld-on installation (2) 3-1/2" x 7-1/4" long mounting plates have multiple holes to fit most applications Mounting hardware not included (5/16" bolt recommended) E-Z crank handle included Sturdy steel construction Black powder coat finish resists corrosion Specs: Quantity: 2 jacks Lift: 30" Collapsed height: 4-3/4" Collapsed length: 33-1/2" Support capacity: 13,000 lbs 6,500 lbs per jack Footplate dimensions: 5" wide x 9" long Lifetime warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.Support Loads up to 6 Tons: Rated to support appropriately matched raised loads up to 12,000 lbs. Pair with a Tallboy Jack: Supports the raised load after lifting, freeing your Tallboy jack to move to the next position.
This 5,000-lb A-frame trailer jack provides 15" of lift for easier hitching and uncoupling. Ergonomic top-wind handle offers comfortable operation. Carbon steel construction is finished with corrosion-resistant black powder coat and zinc.Features: 5,000-lb lift capacity supports utility, cargo, RV, and equipment trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for demanding towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 5,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Outer tube diameter: 2-1/4" Material: carbon steel Finish: black powder coat and zinc Foot: included Warranty: 1-year
This 2,000-lb A-frame trailer jack provides 15" of lift for easier hitching and uncoupling. Its ergonomic top-wind handle offers comfortable operation, and the included foot provides stable support on a variety of surfaces.Features: 2,000-lb lift capacity supports utility, cargo, and recreational trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for everyday towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 2,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Material: carbon steel Finish: black powder coat and zinc Foot: included
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Backing a trailer into a gravel storage spot gets old when the jack drags or sinks. This swivel jack gives you 10" of lift with a wide footplate and sidewind crank, so you can raise, park, and stow the trailer without fighting the setup.This round pipe-mount swivel jack lifts up to 3,000 lbs and supports up to 5,000 lbs, providing stable support during hookup, storage, and trailer loading situations.
If you off-road but space is tight, this Tallboy kit gives you both lifting and support in one setup. The 6-ton bottle jack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Rig: 6-ton Tallboy jack raises the vehicle, while the 6-ton stand supports it during service. Reach High-Clearance Setups: Jack lifts from 8-1/2" to 37-3/4", and the stand supports from 10-13/16" to 28-3/4".
If you off-road but space is tight, the Tallboy kit gives you both lifting and support in one setup. The 2-ton bottle jack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Powersports Rig: 2-ton Tallboy jack raises the vehicle, while the 6-ton stand supports it during service. Work Across Different Heights: Jack lifts from 7-15/16" to 26-3/4", and the stand supports from 10-13/16" to 28-3/4".
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.More Footing on Soft and Uneven Ground Unstable ground turns the front of the trailer into a balancing act when you're trying to park, load, or unhook. The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground.
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. It connects to an external HPU through #6 JIC ports, bolts to a 5" x 5" mounting pattern, and provides 20" of lift with a pivoting 7" foot.Check the Mounting Pattern Before You Bolt It On The jack uses a 5" x 5" mounting plate with three approximately 1/2" bolt holes. Mounting hardware is not included, so compare the plate and hole locations with your A-frame and choose hardware appropriate for the trailer structure.
Upgrade a heavy A-frame trailer from manual cranking with a self-contained 8K hydraulic jack. Its 12V double-acting pump, keyed pendant, 24" of lift, and drill-operated manual override give you powered operation with a backup for power loss.Check the Mounting Pattern Before Installation The 5" x 5" mounting plate uses three approximately 1/2" bolt holes for attaching the jack to your trailer frame. Mounting hardware is not included, so compare the plate and hole locations with your trailer before installation and choose hardware appropriate for your frame.
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. Includes 4 hoses, 8 fittings, and a diverter to help connect it to an external HPU, while 20" of lift handles hitching and unhitching.The jack provides 7,000 lbs of lifting and support capacity with 20" of powered movement for equipment, utility, commercial, construction, and dump trailers.
... Zinc-plating resists corrosion.Features: Electric camper jacks allow you to quickly and easily load and unload your truck bed camper Clutchless motor heads attach to jacks to eliminate the need for manual cranking User-friendly, wireless remote control lets you operate each jack independently or simultaneously Smooth, easy operation thanks to maintenance-free Acme screws Self-lubricating nuts prevent overextension of jacks Square tubing provides superior strength and durability Concave footpads reduce movement and provide increased stability Locking levers keep jacks at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Easily accessible components make for simple maintenance Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Manual override crank (sold separately) allows you to operate jacks without electricity, if needed 4 Camper jacks with motors and necessary installation components included Mounting brackets (designed to fit most campers on the market) Circuit board Remote control (2) 20' Wiring harnesses (2) 10' Wiring harnesses Made in the USA Specs: Overall weight capacity: 11,200 lbs 2,800 lbs Per jack Lift: 36-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty Note: These camper jacks are designed for lifting and lowering only, and should not be used to support your camper during storage.
... Zinc-plating resists corrosion.Features: Electric camper jacks allow you to quickly and easily load and unload your truck bed camper Clutchless motor heads attach to jacks to eliminate the need for manual cranking User-friendly, wireless remote control lets you operate each jack independently or simultaneously Smooth, easy operation thanks to maintenance-free Acme screws Self-lubricating nuts prevent overextension of jacks Square tubing provides superior strength and durability Concave footpads reduce movement and provide increased stability Locking levers keep jacks at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Easily accessible components make for simple maintenance Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Manual override crank (sold separately) allows you to operate jacks without electricity, if needed 4 Camper jacks with motors and necessary installation components included Mounting brackets (designed to fit most campers on the market) - mounting bolts not included Circuit board Remote control (2) 20' Wiring harnesses (2) 10' Wiring harnesses Made in the USA Specs: Overall weight capacity: 8,800 lbs 2,200 lbs Per jack Lift: 34-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty Note: These camper jacks are designed for lifting and lowering only, and should not be used to support your camper during storage.
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won't slip. Oversize footplates help to eliminate sinking and tilting.Features: Scissor jacks level and stabilize 5th-wheel, travel, horse and cargo trailers Heavy-duty worm-gear jacking mechanisms prevent slippage Perfect for stabilizing loads Large footplates provide excellent stability Bolt-on or weld-on installation (2) 3" Wide x 10" long mounting plates have multiple holes to fit most applications Mounting hardware not included (3/8" bolt is recommended) E-Z crank handle included Sturdy steel construction Black powder coat finish resists corrosion Specs: Quantity: 2 jacks Lift: 24" Collapsed height: 4-3/4" Collapsed length: 26" Support capacity: 13,000 lbs 6,500 lbs per jack Combined support capacity: 13,000 lbs Footplate dimensions: 4-1/2" wide x 9" long Mounting plates: 3-1/2" x 7-1/4" Lifetime warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Filters
