Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Lift: 15" Drop leg adjustment: 13-3/4" Total adjustment: 28-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Lift: 15" Drop leg adjustment: 13-3/4" Total adjustment: 28-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-1/2" of manual adjustment to 12-3/8" of lift. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Landing gear stabilizes about 25% of your trailer's total weight when it's loaded up. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Replaces 1 return spring for your Power Gear external spring RV leveling jacks. Works for both 9,000-lb (500082, 500082H, 500082HR, 500272, or 500759) and 12,000-lb (501315 or 500800) Power Gear jacks. ... Features: Replaces 1 return spring for your Power Gear RV leveling jacks Works with: 9,000-lb Power Gear leveling jacks: 500082, 500082H, 500082HR, 500272, and 500759 12,000-lb Power Gear leveling jacks: 501315 and 500800 Includes all of the required installation hardware Specs: Length: Overall: 16-3/4" Spring only: 14-1/2" Diameter: 2-1/2" Fits: 9,000-lb Power Gear leveling jacks: 500082, 500082H, 500082HR, 500272, and 500759 12,000-lb Power Gear leveling jacks: 501315 and 500800
Pull the front-facing plunger pin to release the drop leg for 13-1/2" of manual adjustment. The jack provides 12-3/8" of lift, while a durable screw and built-in grease zerk help ensure smooth, reliable operation. Includes a sidewind crank.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Lift: 13" Drop leg adjustment: 11-1/2" Total adjustment: 24-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: spring-return, dual-pin Outer tube: 4-3/8" square Lift: 13-1/2" Drop leg adjustment: 13" Total adjustment: 26-1/2" Footplate: 9" x 9" with drainage Finish: black powder coat Mount: weld-on
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 11" Retracted 21-1/2" Extended Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Bolt-on mounting bracket included Specs: Application: trailer frames with a height from 2" to 4" No more than 3" wide Bracket height Retracted: 11" Extended: 21-1/2" Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 10" Retracted 20-1/2" Extended Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" x 4-1/4" Handle radius: 6-1/2" Lift capacity: 2,000 lbs 1-Year warranty
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 15-1/2" Retracted 30" Extended Lift: 14-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-7/8" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 6-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 16" and an extended height of 31-1/4". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Outer tube has corrosion-resistant black powder coat Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 16" Retracted 31-1/4" Extended Lift: 15-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" lift and 7-11/16" drop leg.After all, who wants to take a trailer if they can't get the jack to work? This jack has a pipe-mount style design, which means you pull a non-spring-loaded pin to release the jack so it can swing up or down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" lift and 7-11/16" drop leg.After all, who wants to take a trailer if they can't get the jack to work? This jack has a pipe-mount style design, which means you pull a non-spring-loaded pin to release the jack so it can swing up or down.
Weld-on, A-frame coupler is made of sturdy cast steel with a black powder coat finish. The spring-loaded latch allows for fast, 1-handed operation and can be pinned open for easy uncoupling. Pre-drilled hole for mounting an A-frame jack.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for your hitch ball Spring-loaded, auto-engage latch ensures simple, secure hookup and disconnect Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place Latch can be pinned open for easy uncoupling Heavy-duty steel construction Black powder coat finish resists corrosion Built-in jack-attachment point allows for quick, easy mounting of round utility jack Weld-on installation Made in the USA Specs: Application: 50-degree A-frame trailers Ball size: 2-5/16" Weight capacity: 15,000 lbs Jack hole diameter: 2-3/8" Lock pin hole diameter: 3/8" Length: 18"
Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg Works with TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH Specs: Height: 25-1/2" Drop leg adjustment: 12" Footplate dimensions: 8" long x 8" wide Quantity: 1 inner tube and spring-return drop leg assembly
Filters
