Weld-on bracket for D-L jacks with swivel handles.Features: 4" Wide x 5" long weld-on bracket for jacks with 3/8" swivel handle Unfinished Made in the USA
Black powder coated A-frame jack has a retracted height of 10" and an extended height of 25". The black claw handle with a zinc-finished arm provides a sleek look and can be folded away for storage.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Black, claw knob allows for comfortable grip Handle easily folds away for storage Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 10" Retracted 25" Extended Travel: 15" Clearance: 10-7/8" From bottom of bracket to top of jack 12-1/2" From bottom of bracket to top of handle mount 14-1/2" From bottom of bracket to top of handle Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Support capacity: 5,000 lbs Lift capacity: 3,000 lbs 1-Year warranty
Fixed-leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Sidewind handle has smooth, ergonomic design for easy cranking Fixed-leg jack welds directly to application Heavy-duty footplate included ASABE compliant Specs: Bracket height: 17-13/16" Retracted 27-13/16" Extended Lift: 10" Tubing width: 2-1/2" Handle radius: 8-1/2" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks to give you additional clearance needed for dually pickup trucks. ... Features: Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks Works with electric or manual HappiJac camper jack systems (LC736514-4, LC736514-ELKIT, LC736515-4 or LC736515-ELKIT) Includes 2 brackets and installation hardware Made in the USA
Give your camper jacks more clearance and stability with this installation bracket. Provides up to 5" additional clearance on your dual-wheel truck camper jacks. ... Features: Give your camper jacks more clearance with this installation bracket Provides up to 5" additional clearance on your dually truck camper jacks Resists rust and corrosion with a white powder coat finish Mounting hardware is not included Made in the USA Specs: Bracket dimensions: 16" long overall x 5" overall width x 1-1/4" tall Diameter of mounting holes: 3/8" Quantity: 1 bracket
Replacement I-beam jackbracket for Lippert Ground Control 3.0 (LC358590 and LC675817). Includes 1 mounting bracket.Features: Replacement I-beam jackbracket for Lippert Ground Control 3.0 (LC358590 and LC675817) Application: 8" and 10" I-beams Bolts and hardware sold separately Quantity: 1 mounting bracket
Replaces a damaged bracket for your Trailer Valet swivel jack and trailer mover, or allows you to use your Trailer Valet swivel jack on a second trailer.Features: Replaces a damaged bracket for your Trailer Valet swivel jack and trailer mover (STC-V211) Can also be used on a second trailer to allow you to use your Trailer Valet swivel jack on an additional trailer Quantity: 1 replacement or additional bracket
Replaces the mounting bracket on your etrailer or Ram snap-ring swivel jack. Bracket welds onto your trailer and uses a 1/2" pull pin. Designed for TJB Series jacks.Features: Provides attachment point for your etrailer or Ram snap-ring swivel jack Designed for use with TJB Series jacks Weld-on design Works with 1/2" pull pin Diameter of snap ring mount: 2-1/2"
This weld-on bracket provides a solid, secure mounting point for your Atlas jack on almost any trailer frame. Whether upgrading or starting fresh, it's versatile design fits a variety of setups, ensuring a strong, permanent install.Once it's welded to your trailer frame, installation is as easy as bolting on the jack. It's a smart pick for upgrades or new builds. Universal Bracket Compatibility The bracket is designed for use with Atlas jacks that include a universal mounting bracket.
Replaces the flat bracket used to mount your HappiJac camper jack on the front of your truck camper. Combine with L-bracket (LC182492) to form "T" configuration. ... Features: Replaces the flat bracket used to mount your HappiJac camper jack on the front of your truck camper Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems Combine with L-bracket (LC182492 - sold separately) to form "T" configuration Bracket height: 16" Bracket width: 3-3/4" Quantity: 1 bracket Made in the USA
Replaces the upper Z-bracket used to mount your HappiJac camper jack on the rear of your truck camper. Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems.Features: Replaces the upper Z-shaped bracket used to mount your HappiJac camper jack on the rear of your truck camper Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems Bracket height: 16" Width of each outside mounting plate: 2" Width of center mounting plate: 1-1/2" Quantity: 1 bracket Made in the USA
Replaces the lower Z-bracket that mounts your HappiJac camper jack to the rear of your truck camper. Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems.Features: Replaces the lower Z-shaped bracket that mounts your HappiJac camper jack on the rear of your truck camper Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems Bracket height: 5" Quantity: 1 bracket Made in the USA
Replaces the L-bracket used to mount your HappiJac camper jack on the front of your truck camper. Combine with flat bracket (LC182494) to form "T" configuration. ... Features: Replaces the reinforcement L-shaped bracket used to mount your HappiJac camper jack on the front of your truck camper Works with LC736514-4, LC736514-ELKIT, LC736515-4 and LC736515-ELKIT systems Combine with flat bracket (LC182494 - sold separately) to form "T" configuration Bracket height: 16" Quantity: 1 bracket Made in the USA
Replaces the L-shaped lift bracket for your CR Brophy cable camper jack (CJ31, CJ31H, CJ41, CJ74, CJ74H, CX74, or CXHD).Features: Replaces the L-shaped lift bracket for your CR Brophy cable camper jack (CJ31, CJ31H, CJ41, CJ74, CJ74H, CX74, or CXHD) Includes 1 lift bracket Fits: CR Brophy cable camper jacks: CJ31, CJ31H, CJ41, CJ74, CJ74H, CX74, and CXHD
Replaces the passenger's-side swing-out bracket for your HappiJac truck camper jack system. Works with both electric (LC736514-ELKIT or LC736515-ELKIT) and manual truck camper jack systems (LC736514-4 or LC736515-4).Features: Replaces the passenger's-side swing-out bracket for your HappiJac truck camper jack system Works with both electric (LC736514-ELKIT or LC736515-ELKIT) and manual truck camper jack systems (LC736514-4 or LC736515-4) Fits: HappiJac electric, truck camper jack systems: LC736514-ELKIT and LC736515-ELKIT HappiJac manual, truck camper jack systems: LC736514-4 and LC736515-4
Weld-on swivel bracket for trailer jacks with 1/2" pin and snap ring.Features: 4" x 5" Weld-on bracket for all D-L jacks with 1/2" swivel handle Unfinished Made in the USA 22671 Weld-On Swivel Bracket for Dutton-Lainson Trailer Jacks with 1/2" Pin and Snap Ring
Use your Trailer Valet side-mount dolly or drill-powered jack on your large trailer too. This bracket lets you mount your 5X or JXS Series on a trailer frame up to 5" wide x 8" tall.Features: Mount your Trailer Valet dolly or jack on a trailer frame up to 5" wide x 8" tall Works with Trailer Valet 5X and JX5-S Series, side-mount units Includes the elbow joint to turn your XL, MV Pro, or RVR Series dolly into a side-mount model Get ultimate protection with durable, rust-resistant wrinkle black powder coat finish Easily install on your frame with the included hardware Specs: Bracket dimensions: 8" tall x 9-3/8" wide Bolt holes spaced 7-1/2" apart on center horizontally Bolt type: M10 x 150-mm carriage bolt
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side. Easy Installation The included brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.Simple Operation Using these jacks is simple. Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.Features: Cable jacks help you load and unload your truck bed camper Portable design - no need to permanently install unsightly electric jacks on your camper Each jack disassembles into 3 pieces for easy storage Hand winches let you easily raise and lower the jacks Safety latches keep the cables from free-spooling Plastic handle grips offer comfortable cranking Aircraft-grade cables are strong and reliable Sturdy tripod bases evenly distribute your camper's weight Help to eliminate front-to-back and side-to-side motion Large footplates help to prevent sinking and tilting L-shaped lift brackets support the bottom and the sides of your camper Simply place lift brackets under your camper and crank the winches to raise Durable, corrosion-resistant construction Tripod bases and lift brackets are black powder coated Upright poles are galvanized Made in the USA Specs: Quantity: 2 cable jacks Lifting range: 17" - 57" Overall height when assembled: 63" Combined weight capacity: 1,000 lbs Lift bracket dimensions (each): 21-1/2" long x 2" wide x 2" tall Winch gear ratio: 3:1 1-Year limited warranty Note: Always use these jacks in pairs on level ground.
Built for work trailers, haulers, and dump trailers, this self-contained jack works with double-acting systems, delivering strong lifting and lowering without an external pump. The bolt-on bracket installs fast, and the design ensures reliability.Highlights Double-Acting Hydraulic System: Powers both lift and drop for faster, more controlled operation Bolt-On Mounting Bracket: Installs quickly with no welding required 10,000 lb Lift Capacity: Handles heavy-duty trailers with consistent hydraulic power 26" Total Travel: Extended stroke for a wide range of trailer heights Smooth, Reliable Operation: Glide bearings reduce internal wear for long jack life Made in the USA: Built with high-quality seals and domestically sourced steel Features to Know About Fast, Controlled Lifting With Easy Installation This jack is built for speed, control, and simplicity.
Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.Features: Cable jacks help you load and unload your truck bed camper Portable design - no need to permanently install unsightly electric jacks on your camper Each jack disassembles into 3 pieces for easy storage Hand winches let you easily raise and lower the jacks Safety latches keep the cables from free-spooling Plastic handle grips offer comfortable cranking Aircraft-grade cables are strong and reliable Sturdy tripod bases evenly distribute your camper's weight Help to eliminate front-to-back and side-to-side motion Large footplates help to prevent sinking and tilting L-shaped lift brackets support the bottom and the sides of your camper Simply place lift brackets under your camper and crank the winches to raise Durable, corrosion-resistant construction Tripod bases and lift brackets are black powder coated Upright poles are galvanized Made in the USA Specs: Quantity: 2 cable jacks Lifting range: 17" - 57" Overall height when assembled: 63" Combined weight capacity: 3,000 lbs Lift bracket dimensions (each): 21-1/2" long x 2" wide x 2" tall Winch gear ratio: 4:1 1-Year limited warranty Note: Always use these jacks in pairs on level ground.
Easily load or unload your truck camper with this sturdy cable jack. Portable design does not require permanent installation. Simply place the lift bracket under your camper and crank to raise. Breaks down into 3 pieces for storage.Simple Operation Using this jack is simple. Place jack on the side of your camper and position the L-shaped lift bracket underneath the body of the camper. Then crank the hand winch to lift or lower the camper evenly until the proper height for loading or unloading is achieved.
Easily load or unload your truck camper with these heavy-duty cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Automatic winch brakes prevent free-spooling.Features: Heavy-duty cable jacks help you load and unload your truck camper Ideal for rental or commercial use Portable design - no need to permanently install unsightly electric jacks on your camper Each jack disassembles into 3 pieces for easy storage Extra-tall poles let you clear the bed rails on tall pickups Hand winches let you easily raise and lower the jacks 10:1 Gear ratio lets you crank with less effort Plastic handle grips offer comfortable cranking Automatic friction brake on each winch prevents free-spooling Holds the load in position when you let go of the handle Aircraft-grade cables are strong and reliable Sturdy tripod bases distribute your camper's weight evenly Help to eliminate front-to-back and side-to-side motion Large footplates help to prevent sinking and tilting Retractable swing-out tripod leg has 2 wheels for easy maneuvering L-shaped lift brackets support the bottom and the sides of your camper Simply place lift brackets under your camper and crank the winches to raise Durable, corrosion-resistant construction Tripod bases and lift brackets are black powder coated Upright poles are galvanized Made in the USA Specs: Quantity: 2 cable jacks Lifting range: 21" - 67" Overall height when assembled: 76" Combined weight capacity: 4,000 lbs Lift bracket dimensions (each): 21-1/2" long x 2" wide x 2" tall Winch gear ratio: 10:1 1-Year limited warranty Note: Always use these jacks in pairs on level ground.
Filters
