... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: IDlight bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: IDlight bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
Add a sleek and compliant red IDlight to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs creates bright, wide-angle illumination Vacuum-sealed and sonically-welded housing ensures lifetime protection Rugged polycarbonate lens resists impacts and UV damage TecSeal urethane potting and IP68 rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surface mount with (2) #8 screws (screw covers included) Wire lead: 9" pigtail (white ground, black +12 V power) Lens color: Clear with red LEDs Voltage: 9-14 V DC Current draw: 0.04-0.07 A Dimensions: 15-1/2" long x 1-5/16" tall x 1/2" deep Certifications: FMVSS 108, IP68 rated
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
15" Long x 1-3/8" tall x 5/8" thick. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
15" Long x 1-3/8" tall x 5/8" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire design with female.180 bullets. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
An over 80" ID bar and white load light built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.Features: Powered by 3 LEDs Fully submersible over 80" Rugged impact resistant design Red lens with black body IP68 rating and exceeds FMVSS 108 standards Specs: Measurements: 14-1/2" long, 1-1/2" wide, 1" deep LEDs: 3 Color: Red Voltage: 9 to 14 volts DC Mounting: Surface mounted with 8-1/2" hole spacing Connector: 9" pigtail Lifetime warranty TecNiq exceeds specifications for wide vehicle identification bar lighting. One of the most rugged and cost effective solutions on the market, this light works for over 80 vehicles or whenever extra visibility is required.
LED lighting redefined sleek, IP68 sealed, rugged, lifetime warrantied fixtures for work trucks, emergency vehicles, marine use, trailers and more.Features: Powered by 3 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards ID bar must be mounted horizontally Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers.Features: IDlight bar for trailers over 80" wide Smoke lens with red LEDs Black polycarbonate housing Surface mount - Hardware not included 3-Wire pigtail - Hardwires to trailer P2 rated and DOT compliant Specs: Dimensions: 15" long x 1-3/8" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 3 Voltage: 12V Amps: 0.038 Lifetime warranty on LEDs
15-1/2" Long x 1" tall x 1/2" thick IDlight bar. Waterproof LED identification light bar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsThis light mounts on 6-1/8" centers. The light contains a single lead wire for power and is grounded through the mounting hardware. Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # LB1030R Peterson # 136-3R Manufacturer Specifications IDlight bar with three replaceable red lights, part #A68RB, and lead wire for trailers more than 80" wide.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
14-15/16" Long x 1-3/16" tall x 1" deep. Waterproof identification light bar with three 3/4" diameter red LEDs is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount. 2-Wire pigtail.Features: Trailer light functions as an identification light bar for trailers wider than 80" Black molded base holds 3 red Uni-Lites Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Mounts to surface of trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Uni-Lites Specs: Overall dimensions: 14-15/16" long x 1-3/16" tall x 1" deep Individual light diameter: 3/4" Distance between mounting holes (center on center): 8-1/2" Wire lead length: 52" Diodes: 3 (1 per light) Power draw at 12.8V: 0.047 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof identification light kit with (3) 3/4" diameter red LEDs is designed for trailers wider than 80". Supplemental brake function - lights brighten when brake pedal is pressed. ... Features: Trailer light kit functions as an identification light for trailers wider than 80" Supplemental brake function - lights brighten when brake pedal is pressed Black molded wiring harness with 3 red Uni-Lites Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Recessed mount with included black grommets Installation requires a 3/4" diameter hole for each light 3-Wire molded harness 0.18 male bullets White wire for ground Black wire for tail light Red wire for brake light DOT compliant P2 rated Uni-Lites Specs: Individual light dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Approximate wiring length: Overall: 198" Per light: 15" Diodes: 3 (1 per light) Power draw at 12.8 volts: 0.047 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light kit makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" x 1-1/2" x 1-9/16". This LED light bar serves as a rear clearance identification light on trailers. Surface mount - hardware not included. P2 rated.Features: Trailer LED light bar serves as a rear clearance identification light 3 Rectangular LED red lights LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated light produces a 90-degree beam pattern DOT compliant Specs: Dimensions: 17" long x 1-1/2" wide x 1-9/16" thick Distance between mounting holes (center on center): 16"
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. ... These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. ... These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
... It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
Filters
