Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extend out of the water to help you center your boat while loading Assist you in backing your trailer down the boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable Black PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Adjusts out to 13" from trailer Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC Pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width. Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 40" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Install a 4-way flat on your vehicle with this splice-in harness. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems. Requires wiring kit (C55152 - sold separately) to connect to battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire, and pulse-width modulation (PWM) systems Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Requires Curt powered converter wiring kit (C55152 - sold separately) to connect to your battery Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Powered Tail Light Converter with Surface-Mount Technology Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Floats protect your sideboards so you can speed up the time it takes to load and launch without worrying about damaging your boat or personal watercraft. Includes everything you need to install them on your trailer (except tools).
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat. The rubber roller guides help to center your boat during loading and to hold the boat during transport.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.Features: Extra-long U-bolts secures a bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware is sold separately (8) 3/8"-16 Lock nuts (8) 3/8" Washers Includes 2 sets of mounting U-bolts Made in the USA Specs: Fits: trailer frames up to 3" wide x 5-1/4" tall Length: 6" Length of threads: 2-3/8" Bolt diameter: 3/8" Quantity: 2 sets (4 U-bolts)
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They clamp to the rear of your I-beam trailer frame and extend out of the water, providing visual targets to center the boat between during loading.Guide Your Boat Into and Out of the Water with Ease When your boat trailer has been backed down the ramp and is partially submerged, these 75-inch-tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you two highly visible targets to guide your boat between for loading.
If your bow shifts off center during loading, it can contact the trailer. This 3-inch bow roller assembly cushions the bow and helps center the boat, with end bells for added protection so you can load with less contact.These 2' guide-ons use black carpeted 2x4 bunk boards to help guide the boat onto the trailer, giving the hull a defined path during loading and unloading.
This 2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Dimensions: 9" long x 2" diameter 9202-4 Yates 9" Molded Side Guide Roller - Black Rubber
Aluminum guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers so you keep your boat centered when loading or unloading it. ... Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp Aluminum posts are lightweight and rustproof White PVC pipes slide over aluminum posts so you can see your submerged trailer Stainless steel hardware secures posts directly to your trailer's I-beam Posts can be adjusted up to 19" away from your trailer Drilling is required Made in the USA Specs: Application: I-beam trailer frames Overall height: 65" PVC pipe diameter: 2-3/8" U-bolt size (center to center): 2" Quantity: 2 boat guide-ons Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 65" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between for loading.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
... Install guide-on posts above or below the I-beams on your trailer frame.Specs: Application: I-beam trailer frames up to 4" wide Overall height: 60" Steel post dimensions: 39" tall x 1-1/2" wide PVC pipe diameter: 2-3/8" Quantity: 2 boat guide-ons Features: Guideposts provide a visual indicator on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Keeps your trailer in sight when backing it down a boat ramp 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on I-beam trailer frames with included hardware - no drilling required Clamps can be attached above or below I-beam Posts can be adjusted up to 19" away from your trailer Made in the USA Guide Your Boat Into and Out of the Water When your boat trailer has been backed down the ramp and is partially submerged, these 60" tall guideposts that are mounted on the rear corners of the frame will stick out of the water, giving you 2 highly visible targets to guide your boat between when loading.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... Features: Bunk-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Boards can be installed higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade-carpeted boards won't scratch your boat Made in the USA Specs: Quantity: 2 bunk-style pontoon boat guides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Bunk board dimensions (each): 24" long x 4" wide x 2" deep Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Zinc-plated steel U-bolt kit allows you to attach 1 roller-, bunk-, or post-style guide-on to your boat trailer with a frame up to 3" wide x 4" tall. Includes 1 pair of mounting U-bolts and required mounting hardware.Features: Extra-long U-bolts secure 1 bunk-style, roller-style or post-style guide-on to your boat trailer Sturdy, zinc-plated, 16-gauge steel construction Pre-galvanized finish can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish Required mounting hardware included Made in the USA Specs: Fits: trailer frames up to 3" wide x 4" tall Inside dimensions: 5" long x 3-1/2" wide Bolt diameter: 3/8" Quantity: 1 set (2 U-bolts) Included mounting hardware: (4) 3/8"-16 Lock nuts (4) 3/8" Washers
These guide-on posts help you confidently load your boat onto your trailer and back your trailer down the ramp, tilting up to 70 degrees to accommodate your boat's wider hull. ... Features: Guideposts provide a visual target on your trailer to help you load and unload your boat Extends out of the water to help you center your boat while loading Assists you in backing your trailer down the boat ramp 70-Degree tilt accommodates your boat's wider hull 16-Gauge, pre-galvanized steel posts are strong and durable White PVC pipes slide over steel posts so you can see your submerged trailer Simple installation on rear crossmember of trailer frame with included hardware - no drilling required Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/4" tall For frames up to 5-1/4" tall, 2 extra-long U-bolt kits (CE11416 - sold separately) are required Overall height: 40" Steel post dimensions: 18" tall x 1-1/2" diameter PVC pipe diameter: 2-3/8" Bend angle: 70 degrees Quantity: 2 boat guide-ons
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 2-prong plug.Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights are installed (second light sold separately) Light Guide Series features a smooth X-shape across the face of the light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts 2-wire pigtail DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 6-1/2" long x 2-3/8" tall x 1-3/4" deep Number of diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 5/8" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-5 Yates 12" Molded Side Guide Roller - Black Rubber
This 2-1/2" diameter x 2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2-1/2" diameter x 2" wide Inner diameter of end cap: 0.610" Endcaps easily install on the same brackets that your side guide rollers are mounted to.
Get better visibility for launching and loading your boat with these post extensions. Slide extensions into the top of your existing bunk-style guide-ons and secure with included hardware. Adjustable posts give you up to 37" of added height.All you need is some tools, a friend, and a little bit of patience. Remove the bunk from your existing guide-on - the rest of the guide-on can remain on your boat trailer Slide the PVC pipe onto the top of the steel upright Slide the assembled post extension into the opening of the guide-on After you've slid the post into the opening, you'll need to choose how tall you want your guideposts.
This 2" diameter roller replaces one of your boat trailer's guide rollers. Made of durable rubber material.Features: Replaces 1 side guide roller on your boat trailer (sold separately) Eases loading and unloading of boat by helping to guide the boat into place Mounts along the side of your trailer Constructed of heavy-duty rubber Made in the USA Specs: Application: bracket with 1/2" shaft Dimensions: 9" long x 2" diameter
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. ... Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
This 2" diameter x 1-3/4" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 1/2" diameter shaft Dimensions: 2" diameter x 1-3/4" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
Filters
