... Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.Features: Red trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
... Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.Features: Amber trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
Need a compact light with easy control and softer lighting? This LED puck light features a push button on and off switch and a frost lens for diffused illumination. It installs easily and works great for everyday lighting needs.Features: Puck light designed to provide surface-mounted interior illumination Push button on and off switch allows easy control Wisbeam design with frost lens helps diffuse light evenly Compact design fits smaller or tight spaces LED lighting provides efficient, consistent light output 180-Degree beam angle for wide light coverage Easy installation for quick setup Includes 1 puck light Specs: Voltage: 12V Wattage: 4.5 watts Lumens: 396 Beam angle: 180 degrees Color temperature: 3,200 K Diameter: 4-1/2" Light type: LED
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Simple 2-Wire Connection: Hard-wired with black power and white ground leads. Surface Mount Fit: Mounting hole centers 4-13/16". Hardware not included. Specs Light: Function: LED marker/clearance light, PC rated (FMVSS P2 PC) LEDs: 16 Color: amber lens Overall dimensions: 5-3/4" long x 2" tall x 1-3/8" deep Mounting hole centers: 4-13/16" Construction: Housing and lens material: polycarbonate Construction: sealed, waterproof unit Electrical: Voltage: 12V DC Amp draw: 0.248A at 12.8V Wiring: hard wired, 2 wire (black = power, white = ground) Compliance And Warranty: Meets FMVSS P2 PC requirements Warranty: lifetime LED warranty
A cracked or faded red marker light is an easy way to get pulled over or fail inspection. This LED replacement mounts in place of old incandescent units and keeps the rear or side of your trailer clearly marked.Highlights Stay Legal And Visible: Red LED handles rear or side marker and clearance duties. PC Rated Dual Function: Mount on a 45 degree corner to serve as both marker and clearance light. Bright Output, Lower Draw: 16-diode design uses less power than incandescent lamps.
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. It wires to your RV.Features: Low-profile rectangular RV brake, turn, and tail light White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surface mount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger side Driver side: RVSTLB61 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" thick Compatible with 12V DC systems Diodes: 9 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
... Low-profile dome light illuminates an RV's interior with bright white light. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. Accepts 2-Wire pigtail.Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provides brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens with white LEDS Sonically sealed, waterproof housing and lens Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included 2-Wire pigtail - includes power lead and ground wire Specs: Dimensions: 18" long x 5-3/4" tall x 1" thick Light output: Effective lumen output: 880 lumens Raw lumen output: 1,100 lumens Diodes: 10 Wiring length: 16" Power draw at 12.8V: 1.8 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surface mount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
... Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to exterior trailer wall.Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Rustproof aluminum construction Silver powder coat finish resists corrosion Clear lens with white LEDs Compatible with 12V DC systems Made in the USA Specs: Dimensions: 13-5/8" long x 12-1/8" tall x 1-7/8" thick Required cutout dimensions: 10-1/4" wide x 8-3/4" tall Light color: 6,000 - 6,500 Kelvin (Cool White / Daylight White) Diodes: 144 Power draw at 12V DC: 4.2 amps Wire length: 29" 1-Year limited warranty
Need a compact light with easy control? This LED puck light features a push button on and off switch and delivers bright, even illumination in a low-profile design. It installs easily and works great for everyday lighting needs.Features: Puck light designed to provide surface-mounted interior illumination Push button on and off switch allows easy control Snap-on lens allows quick access and installation Compact design fits smaller or tight spaces LED lighting provides efficient, consistent light output 180-Degree beam angle for wide light coverage Easy installation for quick setup Includes 1 puck light Specs: Voltage: 12V Wattage: 3.5 watts Lumens: 308 Beam angle: 180 degrees Color temperature: 3,200 K Diameter: 3-1/4" Light type: LED
... Designed for refrigerated trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail. 10 DiodesFeatures: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens with white LEDs IP65 rated for dust and water resistance Compatible with 12V and 24V DC systems Surface mount - hardware not included Included trim ring adds a finished look 2-Wire pigtail includes power lead and ground wire Specs: Quantity: 1 light Light output: Effective lumen output: 1,200 lumens Raw lumen output: 1,500 lumens Diodes: 10 Light type: daylight white Color temperature: 5,700 K Wire length: 18" Overall dimensions: 18-1/4" long x 5-3/4" tall x 1/2" thick Power draw at: 12V: 1 amp 24V: 0.6 amps Lifetime warranty on LEDs
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.Use the built-in flange with mounting holes to secure the light.
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs creates bright, wide-angle illumination Vacuum-sealed and sonically-welded housing ensures lifetime protection Rugged polycarbonate lens resists impacts and UV damage TecSeal urethane potting and IP68 rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surface mount with (2) #8 screws (screw covers included) Wire lead: 9" pigtail (white ground, black +12 V power) Lens color: Clear with red LEDs Voltage: 9-14 V DC Current draw: 0.04-0.07 A Dimensions: 15-1/2" long x 1-5/16" tall x 1/2" deep Certifications: FMVSS 108, IP68 rated
... Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to exterior trailer wall.Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Rustproof aluminum construction Silver powder coat finish resists corrosion Clear lens with white LEDs Compatible with 120V AC systems Made in the USA Specs: Overall dimensions: 13-5/8" long x 12-1/4" tall x 1-7/8" thick Light dimensions: 9-1/2" long x 7-3/8" tall Required cutout dimensions: 10-3/8" wide x 9" tall Light output: 4,500 lumens Diodes: 19 Power draw at 110V AC: 0.5 amps 1-Year limited warranty
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS compliant for trailers under 80" wide Specs: Overall dimensions: 5-5/8" diameter x 3/4" thick Light face: 4" diameter Diodes: 7 Wire length: 6" Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included pigtail harness.Features: Rectangular brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal light Built-in reflective lens increases light output White LEDs with red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surface mount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and SAE compliant Specs: Dimensions: 11" long x 8" tall x 1-1/4" thick Diodes: 80 1-Year warranty
Upgrade your trailer lighting with a darker, custom look. This oval LED tail light handles stop, turn, and tail functions while holding up to road wear and weather.Standard Grommet and Plug Fit Designed to fit 6-1/2" oval grommet mounts and works with a PL-3 connection for common trailer wiring setups. Specs Lighting: Functions: stop, turn, tail LED color: red Number of diodes: 6 Dimensions: Overall dimensions: 6-1/2" wide x 2-1/4" tall x 1-3/4" deep Shape: oval Installation: Mount: grommet mount Connection: PL-3 Construction: Lens color: smoke Housing material: polycarbonate Lens material: polycarbonate
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of trailer Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are over 80" wide Dimensions: 18" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 15-7/8" Diodes: 20 2-Year warranty
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct replacement of your existing light.
... Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Illuminate your license plate clearly and meet DOT requirements with this compact vertical-mount light. The durable housing and 9" pigtail make it easy to install on trailers, RVs, and utility vehicles.Features: LED license plate light meets FMVSS/DOT visibility requirements Vertical mount design fits recessed or shallow surfaces Compact housing projects just 2" from the mounting surface Sealed polycarbonate lens resists impact, UV, and moisture TecSeal urethane potting protects internal circuitry IP68-rated for complete dust and water protection Standard 2-wire hookup with 9" pigtail for simple install Built for over 100,000 hours of reliable performance Specs: Mounting: Vertical surface mount (2-hole) Wire lead: 9" pigtail Housing color: Black Voltage: 9-14 V DC Current draw: 0.06-0.11 A Dimensions: 2-1/4" wide x 1" tall x 3/4" deep Certifications: SAE/DOT compliant, IP68 rated
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.Features: Low-profile brake, tail, and turn signal light for RVs Glows for tail light Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs ABS plastic base with acrylic lens Surface mount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn: 0.421 amps Tail: 0.114 amps Lifetime warranty on LEDs
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the included pigtail harness.Features: Rectangular RV brake, turn, and tail light Glows for tail light Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surface mount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
Filters
