Powered A-framejack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-framejack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-framejack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Features to know about Push-Button Lifting Power You remember those mornings spent fighting with a manual jack, before you’ve even pulled out of the driveway. This 5,000 lb electric A-framejack connects through your 7-way plug, so you press the switch and let the motor raise or lower your trailer.
Ever get to the end of a long day with a tired back and sore arms, and there's still a heavy trailer sitting on the ball? Press the button and this jack lifts the trailer, saving you from cranking so you can unhook and call it a day.Built for Straight-Frame Trailers This jack is made for the trailers that help you get real work done. The square-tube, bolt-on design fits A-frame horse and livestock rigs, equipment and implement haulers, construction trailers, and heavier utility or flatbed setups.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-framejack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Features to know about Push-Button Lifting Power You remember those mornings spent fighting with a manual jack, hands sore before the day even starts. This 3,500 lb electric A-framejack connects through your 7-way plug, so you press the switch and let the motor raise or lower your trailer.
When you're done cranking a manual jack or your trailer needs hydraulic lift added to the setup, this bolt-on kit gets you there. It mounts to the frame, ties into your pump, and comes with the hoses and fittings you need.Durable Round-Tube Construction: Round-tube design handles repeated lifting and steady use over time. Easy Bolt-On Install: Mounts to the frame without welding, giving you hydraulic lift without a full fabrication job. Features to know about Hydraulic Lift Without the Manual Work If you're ready to stop cranking a loaded trailer, this jack ties into your pump and uses hydraulic power to do the lifting.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-framejack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Black powder coated A-framejack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Travel: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
This A-framejack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Black powder coated A-framejack has a retracted height of 10" and an extended height of 25". The black claw handle with a zinc-finished arm provides a sleek look and can be folded away for storage.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Black, claw knob allows for comfortable grip Handle easily folds away for storage Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 10" Retracted 25" Extended Travel: 15" Clearance: 10-7/8" From bottom of bracket to top of jack 12-1/2" From bottom of bracket to top of handle mount 14-1/2" From bottom of bracket to top of handle Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Support capacity: 5,000 lbs Lift capacity: 3,000 lbs 1-Year warranty
A-frame coupler features a squeeze latch for safe, easy hookup. Squeeze both levers on latch to open ball socket. Jack port lets you mount a round trailer jack.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Squeeze latch allows for safe and easy coupling and uncoupling Remove pin and squeeze both levers together to open ball socket Sturdy, solid steel construction is strong and durable Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Specs: Ball size: 2-5/16" Jack hole diameter: 2-1/4" Overall dimensions: 17-1/2" long x 10-3/4" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 1-1/4" Weight capacity: 15,000 lbs 1-Year warranty
This A-framejack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Black powder coated A-framejack has a retracted height of 5-1/8" and an extended height of 12-3/4". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Bolt-head fastener keeps the handle securely on the jack during operation Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube - with hole still usable - to bottom of bracket): 5-1/8" Retracted 19-3/8" Extended Total lift: 14-1/4" Clearance: 14-1/2" From bottom of bracket to top of handle mount 19-1/2" From bottom of bracket to top of handle 15" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-1/2" Lift capacity: 2,000 lbs 1-Year warranty
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the foot plate helps keep you steady on soft soil or gravel so you can settle in and relax.How to Pick the Right Trailer Jack Capacity Your jack just needs to lift the tongue weight - usually 10 - 15% of your trailers total weight. For example, if your trailer (plus gear) weighs 20,000 lbs, your tongue weight will be 2,000 - 2,500 lbs.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.No Fuss, No Guesswork No complicated wiring or special tools needed here. Just bolt the jack on with the included hardware, wire the pigtails to your 12-volt power source, and you're ready for the next trip. How to Pick the Right Trailer Jack Capacity Your jack just needs to lift the tongue weight - usually 10 - 15% of your trailer's total weight.
Black powder coated A-framejack has a retracted height of 10-3/8" and an extended height of 24-1/2". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Bolt-head fastener keeps the handle securely on the jack during operation Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube - with hole still usable - to bottom of bracket): 10-3/8" Retracted 24-1/2" Extended Travel: 14-1/8" Clearance: 10-7/8" From bottom of bracket to top of handle mount 14-1/2" From bottom of bracket to top of handle 9-1/8" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-1/4" Lift capacity: 3,000 lbs Static capacity: 5,000 lbs 1-Year warranty
Black powder coated A-framejack has a retracted height of 9-1/4" and an extended height of 24-1/4". The zinc-finished sidewind handle arm and internal gearbox make it as sleek as it is useful.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height from bottom of inner tube to bottom of bracket: 9-1/4" Retracted 24-1/4" Extended Travel: 15" Clearance: 14-1/2" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-5/8" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
This corrosion-resistant, zinc-plated, A-framejack has a retracted height of 10" and an extended height of 24-7/8". The claw handle provides a sleek look and can be folded away for storage.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has comfortable claw-style knob Handle folds away for easy storage Durable, rust-resistant clear zinc finish Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height: Retracted: 10" Extended: 24-7/8" Travel: 14-7/8" Clearance: 12-3/8" From bottom of bracket to top of handle mount 10-3/4" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: 3,000 lbs Static capacity: 5,000 lbs Weight: 10.5 lbs 1-Year warranty
This corrosion-resistant, zinc-plated, A-framejack has a retracted height of 8-1/4" and an extended height of 22-1/2". The topwind handle has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has comfortable, grooved grip Bolt-head fastener keeps the handle securely on the jack during operation Durable, rust-resistant, clear zinc finish Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height: Retracted: 8-1/4" Extended: 22-1/2" Travel: 14-1/4" Clearance: 13" From bottom of bracket to top of handle mount 11-1/4" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: 2,000 lbs Weight: 9.05 lbs 1-Year warranty
A-frame coupler features a squeeze latch for safe, easy hookup. Squeeze both levers on latch to open ball socket. Jack port lets you mount a square trailer jack.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Squeeze latch allows for safe and easy coupling and uncoupling Remove pin and squeeze both levers together to open ball socket Sturdy, solid steel construction is strong and durable Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of square utility jack SAE J684 certified Specs: Ball size: 2-5/16" Jack hole diameter: 2-1/4" Overall dimensions: 17-1/2" long x 10-5/8" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 1-1/4" Weight capacity: 15,000 lbs 1-Year warranty
Black powder coated A-framejack has a retracted height of 9-1/4" and an extended height of 24". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Features: Utility jack lets you raise and lower your A-frame trailer Topwind handle has zinc finish for attractive look and rust resistance Bolt-head fastener keeps the handle securely on the jack during operation Black powder coat finish resists corrosion Internal gearbox provides an attractive look Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 9-1/4" Retracted 24" Extended Travel: 14-3/4" Clearance: 14-7/8" From bottom of bracket to top of handle mount 18-1/2" From bottom of bracket to top of handle 13-1/8" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 6-3/8" Lift capacity: 2,000 lbs 1-Year warranty
Powered A-framejack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. ... The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power. This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler.
Filters
