Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. ... The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. ... Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Total lift: 30" Screw travel : 15" Drop leg travel : 15" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailerjacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
This might be just what you need if you have clearance issues along your trailer frame that won't let you swing a jack up. Wheel swivels 360 degrees. Premium zinc finish with a 500-hour salt spray rating is ideal for boat trailers. ... Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Capacity: 1,000 lbs Bracket height: Retracted: 10" Extended: 25" Screw travel : 15" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel diameter: 6" 3-Year limited warranty Built for Setups that Make a Swivel Jack Impractical to Use Most boat trailerjacks are designed so that you can stow them parallel to your tongue when you're towing.
Replaces the end cap on your Fulton square, fixed-mounttrailerjack (FHD2500).Features: Replaces the end cap on your Fulton square, fixed-mounttrailerjack (FHD2500) Measures 2-1/4" x 2-1/4" Fits: Part number FHD2500 , Fulton square, fixed-mounttrailerjack
Great for construction and agricultural trailers, this jack includes a heavy-duty, versatile mount that lets you easily install it and also keeps the jack up and out of the way when it's not in use.Features: Heavy-Duty Use: Built for trailers that tow construction equipment, agricultural machinery, and other heavy cargo Strong, Durable Mount: Innovative, heavy-duty bracket gives excellent support for a side-mountjack Bracket also makes it easy to remove the jack and remount it out of the way for travel Extended Lift: Drop leg pairs with the already substantial travel to get your trailer raised Strudy and Dependable: Solid steel construction Made in the USA and designed by US Military Veteran Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28" Screw travel: 15" Drop leg travel: 13" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Limited lifetime warranty
Fixed-leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Sidewind handle has smooth, ergonomic design for easy cranking Fixed-leg jack welds directly to application Heavy-duty footplate included ASABE compliant Specs: Bracket height: 17-13/16" Retracted 27-13/16" Extended Lift: 10" Tubing width: 2-1/2" Handle radius: 8-1/2" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Travel: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Pipe mount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipe mount): 15-3/4" Retracted 31" Extended Travel: 15-1/4" Clearance: 8-1/2" from center of pipe mount to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pipe mount pin hole diameter: 5/8" Handle radius: 8-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.Features: Rugged platform system lets you build a large aftermarket roof rack that's perfect for off-road use Includes 1 LockNLoad platform, 4 SkyLine towers, 4 LockNLoad adapters, and a custom fit kit Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a rooftop tent Integrated channels accommodate various off-road accessories (sold separately) Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more Built-in wind deflector reduces wind noise and drag Rugged construction designed for off-road use and tested in the Australian Outback Aluminum frame with black powder coat is durable and rustproof Assembly required Specs: Platform dimensions: 55" long x 49" wide x 4" tall Platform weight: 43.5 lbs Limited lifetime warranty Note: Always observe your vehicle's maximum roof load capacity.
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 72" long x 51" wide Tray weight capacity: 385 lbs Always observe your vehicle's maximum weight capacity Platform weight: 43.9 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 330 lbs Always observe your vehicle's maximum weight capacity Platform weight: 36.6 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 330 lbs Always observe your vehicle's maximum weight capacity Platform weight: 36.6 lbs 3-Year warranty
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.Features: Rugged platform system lets you build a large aftermarket roof rack that's perfect for off-road use Includes 1 LockNLoad platform, 4 SkyLine towers, 4 LockNLoad adapters, and a custom fit kit Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a rooftop tent Integrated channels accommodate various off-road accessories (sold separately) Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more Built-in wind deflector reduces wind noise and drag Rugged construction designed for off-road use and tested in the Australian Outback Aluminum frame with black powder coat is durable and rustproof Assembly required Specs: Platform dimensions: 60" long x 54" wide x 4" tall Platform weight: 57 lbs Limited lifetime warranty Note: Always observe your vehicle's maximum roof load capacity.
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 49" long x 45" wide Tray weight capacity: 275 lbs Always observe your vehicle's maximum weight capacity Platform weight: 28 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization. Works with a variety of overlanding accessories. Includes full perimeter rails.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Perimeter rails give you multiple, easy-to-access tie-down points and help keep gear contained Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 330 lbs Always observe your vehicle's maximum weight capacity Platform weight: 36.6 lbs 3-Year warranty
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.Features: Rugged platform system lets you build a large aftermarket roof rack that's perfect for off-road use Includes 1 LockNLoad platform, 4 SkyLine towers, 4 LockNLoad adapters, and a custom fit kit Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a rooftop tent Integrated channels accommodate various off-road accessories (sold separately) Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more Built-in wind deflector reduces wind noise and drag Rugged construction designed for off-road use and tested in the Australian Outback Aluminum frame with black powder coat is durable and rustproof Assembly required Specs: Platform dimensions: 60" long x 54" wide x 4" tall Platform weight: 57 lbs Limited lifetime warranty Note: Always observe your vehicle's maximum roof load capacity.
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization. Works with a variety of overlanding accessories. Includes ARB's 3/4 rail kit.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Raised rails give you multiple, easy-to-access tie-down points and help keep gear contained Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 330 lbs Always observe your vehicle's maximum weight capacity Platform weight: 36.6 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 84" long x 51" wide Tray weight capacity: 440 lbs Always observe your vehicle's maximum weight capacity Platform weight: 50.3 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 49" long x 45" wide Tray weight capacity: 275 lbs Always observe your vehicle's maximum weight capacity Platform weight: 28 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 84" long x 51" wide Tray weight capacity: 440 lbs Always observe your vehicle's maximum weight capacity Platform weight: 50.3 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 49" long x 51" wide Tray weight capacity: 275 lbs Always observe your vehicle's maximum weight capacity Platform weight: 31.5 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 72" long x 51" wide Tray weight capacity: 385 lbs Always observe your vehicle's maximum weight capacity Platform weight: 43.9 lbs 3-Year warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixedmounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 285 lbs Always observe your vehicle's maximum weight capacity Platform weight: 37 lbs 3-Year warranty
Filters
