Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 3-3/8" Assemblies fit 16" or larger wheels. Made in the USA.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Allows for the perfect setting thanks to the fine-tooth star gear Easier to install and gives you more control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines needed Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Durable magnets ensure consistent braking power Encased in a stamped steel housing Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting bolts and nuts CSA certification ensures quality Made in the USA Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Fits AL-KO/Hayes axles only Wheel size: 16" or larger Axle rating: 8,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
These drum brakes are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. Fits AL-KO/Hayes axles with 4-bolt flanges or non-AL-KO axles with standard 5-bolt flanges. Made in the USA.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting hardware sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4 bolt or standard 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the electric junction box beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller. Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes BrakeControllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake BrakeController Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Electric-hydraulic brake actuator with brake lines lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Enjoy convenience as you achieve greater braking control and performance.Certain models require the Hydrastar control adapter module (HBA-CAM; sold separately) to work with the Hydrastar electric-over-hydraulic brake actuator. For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port behind your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port behind the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller. Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes BrakeControllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake BrakeController Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller. Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes BrakeControllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake BrakeController Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the electric junction box beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller. Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes BrakeControllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake BrakeController Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
Install your Hayeselectric trailer brakecontroller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brakecontroller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electricbrakecontroller Compatible with time-delayed and proportional brakecontrollers from Hayes Made in the USA Installation of HayesBrakeController Adapter To install your Hayeselectricbrakecontroller, you need to connect the wiring of the controller to your vehicle.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 7" x 1-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 10" to 13" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts included - nuts and lock washers (BRKH7) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 7" diameter x 1-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 10", 12", and 13" Axle rating: 2,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
12" x 2" Passenger's-side electric trailer brake assembly fits 6,000-lb axles. Mounting flange has AL-KO/Hayes 4-bolt or standard 5-bolt pattern. Fits 14-1/2" to 16" wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: right hand (passenger's side) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4-bolt or standard 5-bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty
12" x 2" Driver's-side electric trailer brake assembly fits 6,000-lb axles. Mounting flange has AL-KO/Hayes 4-bolt or standard 5-bolt pattern. Fits 14-1/2" to 16" wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: left hand (driver's side) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4-bolt or standard 5-bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty
12" x 3-3/8" Passenger's-side electric trailer brake assembly fits 8,000-lb AL-KO / Hayse axles. Mounting flange has a 4-bolt pattern. Self-adjusting brakes require little maintenance. Fit 16" or larger wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Self-adjusting brakes automatically adjust to deliver optimum performance and braking power No need for manual brake adjustments Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes Mounting bolts and hardware included Adjuster plugs sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: right hand (passenger's side) Dimensions: 12" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Fits AL-KO / Hayse axles only Wheel size: 16" or larger Axle rating: 8,000 lbs
12" x 3-3/8" Driver's-side electric trailer brake assembly fits 8,000-lb AL-KO / Hayse axles. Mounting flange has a 4-bolt pattern. Self-adjusting brakes require little maintenance. Fit 16" or larger wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Self-adjusting brakes automatically adjust to deliver optimum performance and braking power No need for manual brake adjustments Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes Mounting bolts and hardware included Adjuster plugs sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: left hand (driver's side) Dimensions: 12" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Fits AL-KO / Hayse axles only Wheel size: 16" or larger Axle rating: 8,000 lbs
10" x 1-1/2" Driver's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts and hardware included Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: left hand (driver's side) Dimensions: 10" diameter x 1-1/2" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13" to 15" Axle rating: 3,000 lbs
10" x 1-1/2" Passenger's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.Features: Electricbrakes are easier to install and offer more user control than hydraulic brakes Requires only an electricbrakecontroller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts and hardware included Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: right hand (passenger's side) Dimensions: 10" diameter x 1-1/2" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13" to 15" Axle rating: 3,000 lbs
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.For best performance, it is recommended that you use an aftermarket electricbrakecontroller rather than an OEM factory-installed controller. Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes BrakeControllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284 or 47285) Yes Agility (47294 or 47295) No Maxbrake BrakeController Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Vented, marine-grade aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic disc brakes. Includes wiring, 7-way harness, and breakaway. Brake lines sold separately.Hydrastar Electric-Over-Hydraulic Actuator vs. Standard Surge Brake Actuators With the Hydrastar electric-over-hydraulic actuator, you can get all the benefits of towing with an electricbrakecontroller while using hydraulic brakes.
Filters
