Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Features: Heavy-duty shock-absorbing hitch uses an air bag and rubber bumpers to provide a smooth and comfortable ride Helps extend the life of your truck and trailer by protecting them from unnecessary wear and tear Enlarged air bag and thick steel side plates designed for heavy-duty trailers Limits chucking and jerking to give you better control of your tow vehicle and trailer Adjustable air bag lets you easily adapt the ball mount to suit your trailer's load Ensures just enough shock absorption for your setup and not so much as to cause a stiff ride 12 Available drop positions let you tow trailers of different heights Drop or raise ball mount platform to match your application Mount any Shocker Hitch accessory, including pintle hook, clevis pin, and drawbar attachments (all sold separately), in the channel to hook up to even more trailers 2 Different-sized hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Grease zerk fitting at the pivot point makes lubricating easy Grade 50 steel plates and cold-rolled steel shank provide maximum durability Shot blasted and powder coated to prevent rust Silver powder coated steel balls are corrosion resistant One-piece ball and platform design offers built-in strength and versatility 3 Easy-to-remove adjustment pins included Large D-handles are easy to grasp - no more fumbling with small hitch pin heads Hitch lock for securing to receiver is sold separately Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Ideal for trailers between 8,000 lbs and 20,000 lbs Fits most pickup trucks (see chart below) Fits Vans, Toter Homes, SUV's with receiver under the bumper (see clearance measurements below) Ball sizes: 2" and 2-5/16" Gross towing weight: 2" Ball: 10,000 lbs 2-5/16" Ball: 20,000 lbs Maximum tongue weight: 2" Ball: 1,000 lbs 2-5/16" Ball: 2,000 lbs Drop: 0" - 8-1/2" Hitch pin hole diameter: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty Notes: Will not fit SUVs, CUVs, or sedans due to limited clearance Will not fit a 3" hitch, even with a reducer sleeve, because trucks with 3" hitches have deeper frames Requires 22" of clearance below the bottom of your receiver tube Requires a minimum of 7" of clearance between the center of the hitch pin hole and the rearmost point of your truck Receiver opening should be flush with your bumper or protruding from the rear of the vehicle for the best fit Adjustable Drop Hitch for Towing Different Trailers Adjusting the height of the hitch ball to accommodate for a different trailer takes almost no time at all.
Insert this heavy-duty drop hitch receiver adapter into your 2" hitch to get up to an 8" rise or drop for high or low ground clearance.Features: Drop hitch receiver adapter provides a rise or drop to match the height of your application Shank slides into hitch receiver Built-in anti-rattle bolts reduce vibration and noise Heavy-duty steel construction is ideal for towing heavy loads Corrosion-resistant black powder coat finish (3) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch lock sold separately Made in the USA Specs: Application: 2" x 2" hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 8" Maximum rise: 8" Maximum gross towing weight capacity: 10,000 lbs Maximum tongue weight: 1,000 lbs Dimensions: 13-1/2" tall x 12-3/4" long x 4" wide Weight: 25 lbs 1-Year warranty Note: For flat-towing use only.
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Features: Heavy-duty shock-absorbing hitch uses an air bag and rubber bumpers to provide a smooth and comfortable ride Helps extend the life of your truck and trailer by protecting them from unnecessary wear and tear Enlarged air bag and thick steel side plates designed for heavy-duty trailers Limits chucking and jerking to give you better control of your tow vehicle and trailer Adjustable air bag lets you easily adapt the ball mount to suit your trailer's load Ensures just enough shock absorption for your setup and not so much as to cause a stiff ride 12 Available drop positions let you tow trailers of different heights Drop or raise ball mount platform to match your application Mount any Shocker Hitch accessory, including pintle hook, clevis pin, and drawbar attachments (all sold separately), in the channel to hook up to even more trailers 2 Different-sized hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Grease zerk fitting at the pivot point makes lubricating easy Grade 50 steel plates and cold-rolled steel shank provide maximum durability Shot blasted and powder coated to prevent rust Silver powder coated steel balls are corrosion resistant One-piece ball and platform design offers built-in strength and versatility 3 Easy-to-remove adjustment pins included Large D-handles are easy to grasp - no more fumbling with small hitch pin heads Hitch lock for securing to receiver is sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Ideal for trailers between 8,000 lbs and 20,000 lbs Fits most pickup trucks (see chart below) Fits Vans, Toter Homes, SUV's with receiver under the bumper (see clearance measurements below) Ball sizes: 2" and 2-5/16" Gross towing weight: 2" Ball: 10,000 lbs 2-5/16" Ball: 20,000 lbs Maximum tongue weight: 2" Ball: 1,000 lbs 2-5/16" Ball: 2,000 lbs Drop: 0" - 8-1/2" Hitch pin hole diameter: 5/8" Distance between vertical adjustment holes: 1" Inside width of channel: 3-3/4" 1-Year warranty Notes: Will not fit SUVs, CUVs, or sedans due to limited clearance Will not fit a 2-1/2" hitch, even with a reducer sleeve, because trucks with 2-1/2" hitches have deeper frames Requires 22" of clearance below the bottom of your receiver tube Requires a minimum of 7" of clearance between the center of the hitch pin hole and the rearmost point of your truck Receiver opening should be flush with your bumper or protruding from the rear of the vehicle for the best fit Adjustable Drop Hitch for Towing Different Trailers Adjusting the height of the hitch ball to accommodate for a different trailer takes almost no time at all.
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 7,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 20,000 lbs with the 2-5/16" ball. Can be positioned in up to a 11-3/4" drop position. Fits 2-1/2" x 2-1/2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball mount up or down along shank and secure in place with included pins and vibration-resistant clip 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 1-1/4" increments Ball mount doubles as a weight-distribution shank Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and yellow zinc trailer balls resist corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 20,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 2,000 lbs Maximum drop: 11-3/4" Distance between vertical adjustment holes: 1-1/4" Pin hole diameter: 5/8" Limited 1-year warranty
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 15,000 lbs with the 2-5/16" ball. Can be used in 10" drop or 9" rise positions. Fits 2" x 2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball mount up or down along shank and secure in place with included pins and vibration-resistant clip 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 2-1/2" increments Ball mount doubles as a weight-distribution shank Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and chrome plating on balls resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 15,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 1,500 lbs Maximum rise: 9" Maximum drop: 10" Distance between vertical adjustment holes: 1-1/4" Distance between hitch pin hole to ball mount: 11" (center-on-center) Pin hole diameter: 5/8" Limited 1-year warranty
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 7,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
Insert this heavy-duty drop hitch receiver adapter into your 2" hitch to get up to an 4" rise or drop for high or low ground clearance.Features: Drop hitch receiver adapter provides a rise or drop to match the height of your application Shank slides into hitch receiver Adjustable height allows your tow bar to be level when towing Slide receiver platform up or down shank and secure in place with included dual pins For flat towing use only Built-in anti-rattle bolts reduce vibration and noise Heavy-duty steel construction is ideal for towing heavy loads Corrosion-resistant black powder coat finish (3) 5/8" Hitch pins with clips included for securing adapter to shank as well as attaching accessories Hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 4" Maximum rise: 4" Maximum gross towing weight capacity: 10,000 lbs Maximum tongue weight: 1,000 lbs Distance between center of hitch pin hole to center of hitch pin hole: 13-1/2" Distance from center of hitch pin hole to angled brace: 6" Weight: 25 lbs Limited lifetime warranty Note: For flat towing use only.
This super adjustable hitch gives you a whopping 19-1/4" of drop and 19" of rise. With 2 different sizes of hitch balls and a gross towing weight of up to 22,000 lbs, you really can tow just about any trailer with your lifted truck.Or simply add a hitch step (358STEP) to easily access your truck bed. How to Measure Trailer Hitch Rise or Drop
This super adjustable hitch gives you a whopping 19-1/4" of drop and 19" of rise. With 2 different sizes of hitch balls and a gross towing weight of up to 22,000 lbs, you really can tow just about any trailer with your lifted truck.Or simply add a hitch step (358STEP) to easily access your truck bed. How to Measure Trailer Hitch Rise or Drop
This super adjustable hitch gives you a whopping 21-1/4" of drop and 21" of rise. With 2 different sizes of hitch balls and a gross towing weight of up to 22,000 lbs, you really can tow just about any trailer with your lifted truck.Or simply add a hitch step (358STEP) to easily access your truck bed. How to Measure Trailer Hitch Rise or Drop
This super adjustable hitch gives you a whopping 21-1/4" of drop and 21" of rise. With 2 different sizes of hitch balls and a gross towing weight of up to 22,000 lbs, you really can tow just about any trailer with your lifted truck.Or simply add a hitch step (358STEP) to easily access your truck bed. How to Measure Trailer Hitch Rise or Drop
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 10,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 7,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 7,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
You're hooking your trailer after a long day of gear loading and realize the receiver doesn't line up; you slide in this adapter, dial the height in seconds, and your trailer sits level, letting you focus on driving, not fiddling.Highlights 11-inch Rise/Drop: Lets you adjust height up or down up to 11 inches to match your trailer and vehicle. 7,000-lb Towing Capacity: Handles heavy loads without reducing your towing capability. 2-inch Receiver Compatibility: Fits into a 2-inch hitch and accepts a 2-inch receiver accessory.
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. Heavy-duty jack screw can lift up to 5 tons.Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
... This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and matte black powder coat help fight rust.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy Drop Leg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin. Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
No matter which way you flip it, this 2-ball drop hitch is basically all you'll ever need. We know it looks pretty standard, but its tight tolerances mean you can forget about annoying rattle. ... Quick Tip: As for the hitch ball itself, if you really want to make sure that black nickel stays looking fresh for longer, we suggest greasing it up before you tow. How to Measure Drop on an Adjustable Ball Mount
... This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and black powder-coated steel help fight rust.
Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Ball mount length: 7-1/2" from center of hitch pin hole to center of ball hole Drop: 2" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ball mounts have just 1 layer of paint or powder coat to protect them from the outside world.
Filters
