When your solar setup pushes into higher-voltage series wiring, this MPPT controller steps in with 250V PV input headroom and coordinated multi-controllercharging. It keeps larger arrays charging in step without forcing a lower-voltage redesign.This unit supports lithium, AGM, gel, and flooded batteries with automatic voltage selection and eight pre programmed charge profiles. You can reconfigure charging behavior as your battery setup changes without replacing the controller or compromising battery health.
30-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging. ... Features: 30-Amp solar controller prevents harmful overcharging of your RV batteries Monitors and adjusts output from your solar panels Digital PWM technology regulates panel output to provide a consistent charge Automatic multistage charging switches modes as the battery charges - helps extend battery life Preset charging profiles for sealed/gel, AGM, flooded, and lithium batteries Backlit, digital LCD display monitors charge and discharge currents 4 USB-A ports allow you to charge devices while solar panels are generating power Includes wiring for connecting controller to your solar panels and RV battery Specs: Application: 12V, 24V, 36V, and 48V battery and solar systems Works with sealed/gel, AGM, flooded lead acid, and lithium iron phosphate batteries Maximum solar array current: 30 amps Maximum solar panel input voltage: 100V Maximum solar array input power: 390 watts (12V), 780 watts (24V), 1,170 watt (36V), or 1,560 watt (48V) Controller dimensions: 2" long x 7-13/16" wide x 4" tall Limited lifetime warranty Note: AGM batteries need to use the lead-acid battery setting on the solar chargecontroller.
If your RV solar setup drops off in patchy sun, this MPPT controller tracks power faster and lets you tune battery settings over Bluetooth. Its 30A output fits matched 12V or 24V arrays, so you can see steadier charging day to day.This controller supports lithium, AGM, gel, and flooded batteries with adaptive charge profiles and automatic stage control for bulk, absorption, and float.
When your solar setup hits charging limits or stops behaving right, this MPPT controller steps in with 150V PV input headroom and precise chargecontrol. It tracks sunlight fast and keeps batteries charging safely without forcing a system redesign.You end up seeing more consistent charging output instead of large swings or missed production during the day. Adapts to Battery Changes Without Replacement Switching battery types can force a controller swap if charge profiles do not match.
When your solar setup grows past one controller or pushes series voltage limits, this MPPT unit steps in with 150V PV input headroom and 100 amp output. It keeps larger arrays charging in step without forcing a full system redesign.This unit supports lithium, AGM, gel, and flooded batteries with automatic voltage selection, dedicated charging profiles, and 8 pre-programmed charge profiles. You can reconfigure charging behavior as your battery setup changes without replacing the controller or compromising battery health.
When you're adding panels to a mid-sized RV or off-grid setup and need more charging without overstepping voltage limits, this MPPT controller boosts solar harvest with a 100V PV limit and 50 amp output, so your batteries charge consistently.This unit includes 8 preprogrammed charge profiles and fully programmable charge settings to match lithium, AGM, gel, or flooded batteries. You can adjust charging behavior without replacing the controller during upgrades.
When your batteries aren't staying charged and your old controller falls short, this MPPT unit pulls more from changing light and uses BatteryLife management to prevent repeated partial charging, so your battery reaches a full charge.The built-in load output tackles that with automatic load disconnect at a configurable voltage, plus a short circuit proof load output design. That gives the controller a direct role in battery protection instead of only passing charge through. In real use, connected loads get cut off before excessive discharge turns into a battery recovery problem.
30-Amp Bluetooth solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.This accelerates the charge, but also helps extend battery life by adjusting the voltage during the different modes. The controller is compatible with multiple battery types and includes preset charging profiles for sealed/gel, AGM, flooded/wet cell, and lithium batteries.
When you add panels and your old controller starts falling behind, this MPPT unit takes higher-voltage input up to 150V and supports lithium, AGM, gel, and flooded batteries. ... Features to know about More Headroom for Series-Wired Arrays When you add panels and start wiring in series, lower-voltage controllers can become the thing that stops the upgrade. This controller gives you a 150V maximum PV open circuit voltage and 45 amps of charge current, so you can build around higher-voltage panel layouts while staying within the controller's published limits.
If you're adding panels or replacing a controller that can't keep up, this MPPT unit gives you 60 amps of charging with a 150V PV limit. Its charge settings let you match the battery bank, so charging stays steady in changing light.This controller steps up with a rated charge current of 60 amps and nominal PV power of 12V at 860 watts, 24V at 1,720 watts, and 48V at 3,440 watts.
This solar chargecontroller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.Features to Know About Plan a Larger Array Without Guessing: Supports Up to 1,200 Watts A chargecontroller has to be sized for both your battery voltage and the amount of solar feeding it. This 40-amp controller supports up to 600 watts on a 12V system or 1,200 watts on a 24V system, giving you clear limits to work with as you plan or expand your array.
Stay in control of your power without the guesswork. With real-time monitoring and smarter charging, this controller keeps your 12V or 24V system running smoothly so you can settle in, relax, and enjoy the moments that matter off the grid.Get More From Available Sunlight: MPPT Converts Extra Voltage Into Charging Current This MPPT controller continually finds the array's most productive operating point, then converts excess panel voltage into additional charging current.
This efficient solar chargecontroller works seamlessly with your PowerTrak setup for advanced solar monitoring. It's dual-bank compatible and stackable, meaning that it is a great option if you are building out a large solar array on your RV.Features: 30-Amp solar controller prevents harmful overcharging of your batteries Automatic multistage charging switches modes as the battery charges to extend battery life Preset charging profiles for lithium, AGM, gel, and flooded batteries MPPT technology optimizes panel output to charge batteries faster than PWM controllers Solar systems with large battery banks benefit from increased efficiency Parallel capability lets you connect up to 5 total controllers for a max solar array of 150 amps PowerTrak Screen compatible for monitoring and configuring power settings (sold separately) Compatible with multiplex systems Allows connection via Bluetooth to monitor status on your smart device Specs: Application: 12V and 24V battery and solar systems Works with lithium-ion, AGM, gel, and flooded lead acid batteries Maximum solar array current: 30 amps Maximum solar panel input voltage: 96 volts open circuit Maximum PV power input: 600 watts at 12 volts 1,200 watts at 24 volts Operating temperature: -40 F to 140 F Weight: 1 lb Dimensions: 7-5/8" long x 7-1/2" wide x 3" tall 5-Year warranty What is the Go Power PowerTrak System?
The Rich Solar chargecontroller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.With a larger array, colder temperatures, or a greater difference between panel and battery voltage, MPPT can harvest power that a PWM setup leaves unused. Match the Controller to Your System: Four Voltage Options Add Flexibility You should not have to replace your chargecontroller simply because your system uses a higher-voltage battery bank.
If you're expanding a trailer or RV solar setup and need more series-wiring headroom, this MPPT controller manages charging with a 150V PV limit. Bluetooth lets you monitor performance in real time, so charging stays visible as conditions change.Expand Systems Without Controller Conflicts: Wireless sync coordinates charge stages across multiple units. Features to know about Run Higher Voltage Arrays Without Hitting Limits Array expansion often stalls when voltage limits force a redesign or restrict series wiring.
When your solar setup grows into high-voltage series wiring, this MPPT controller steps in with 250V PV input headroom and 100 amp output. It keeps larger arrays charging in step without forcing you back to a lower-voltage design.This unit supports lithium, AGM, gel, and flooded batteries with automatic voltage selection and eight pre programmed charge profiles. You can reconfigure charging behavior as your battery setup changes without replacing the controller or compromising battery health.
This 20-amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.Features: 20-Amp PWM solar controller adjusts solar panel output for a quick, consistent charge Automatic multistage charging switches modes as the battery charges - helps extend battery life Safety features protect against overcharging, undercharging, reverse polarity, short circuit, and over voltage Digital display monitors amperage, voltage, and battery capacity IP65 rated construction is weather resistant and dustproof Includes: solar chargecontroller, 3' long spade to HPP cable to connect to Goal Zero Boulder 200 solar panel Requires a spade to SAE cable (GZ27MR - sold separately) and either a SAE to ring terminal (GZ56MR - sold separately) or SAE to alligator clips cable (GZ39MR - sold separately) to charge a 12V battery Specs: Application: 12V battery systems Works with gel, AGM, calcium, flooded lead acid, LTO, and lithium iron phosphate batteries Maximum solar array current: 20 amps Normal input solar array voltage: 15 - 22V Maximum solar array voltage: 25V Operating temperature: -13 to 122 F IP rating: IP65 Cable length: 3' Weight: 1.1 lbs Dimensions: 3-7/8" long x 6-1/8" wide x 1" tall 1-Year warranty
The Rich Solar chargecontroller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.Features to Know About Choose the Right Size for Your Array: Supports 12V and 24V Systems Choosing a chargecontroller should not come down to guessing how many panels it can handle. This 20-amp controller supports up to 260 watts of solar on a 12V system or 520 watts on a 24V system, giving you clear limits to work with as you plan your array.
30-Amp Bluetooth solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.Additionally, a built-in USB port on the front of the controller provides a convenient outlet to charge your cell phone or tablet. It includes a Bluetooth function that lets you connect the controller to your smartphone or tablet with the free Go Power!
This efficient solar chargecontroller works seamlessly with your PowerTrak setup for advanced solar monitoring. It's dual-bank compatible and stackable, meaning that it is a great option if you are building out a large solar array on your RV.Features: 40-Amp solar controller prevents harmful overcharging of your batteries Automatic multistage charging switches modes as the battery charges to extend battery life Preset charging profiles for lithium, AGM, gel, and flooded batteries MPPT technology optimizes panel output to charge batteries faster than PWM controllers Solar systems with large battery banks benefit from increased efficiency Parallel capability lets you connect up to 5 total controllers for a max solar array of 200 amps PowerTrak Screen compatible for monitoring and configuring power settings (sold separately) Compatible with multiplex systems Allows connection via Bluetooth to monitor status on your smart device Specs: Application: 12V and 24V battery and solar systems Works with lithium-ion, AGM, gel, and flooded lead acid batteries Maximum solar array current: 40 amps Maximum solar panel input voltage: 96 volts open circuit Maximum PV power input: 900 watts at 12 volts 1,800 watts at 24 volts Operating temperature: -40 F to 140 F Weight: 1 lb Dimensions: 8" long x 5" wide x 3" tall 5-Year warranty What is the Go Power PowerTrak System?
When your solar setup pushes past normal voltage limits, this MPPT controller steps in with 250V PV input headroom and smarter tracking in partial shade. It keeps charging steady without forcing you to redesign the array around a lower ceiling.You get steadier charging instead of watching output fall off when roof conditions are less than perfect. Adapts to Battery Changes Without Replacement Switching battery types can force a controller swap if charge profiles do not match.
When you're swapping a small controller or upgrading from PWM, this MPPT unit steps in with better low-light tracking and built-in Bluetooth. Its 75V input limit keeps small arrays in check while delivering steady, controlledcharging day to day.Highlights Improves Output From Small Arrays: 98% efficient MPPT tracks changing light better than basic controllers. Handles Battery Upgrades Cleanly: Supports lithium, AGM, gel, and flooded with dedicated charge profiles. 10 Amp Output Defines System Capacity: Charge current sets usable array size, especially on 12V systems.
When your solar setup grows past one controller or pushes series voltage limits, this MPPT unit steps in with 150V PV input headroom and VE.Can coordination. It keeps charging aligned across a larger system without rebuilding the whole array.This unit supports lithium, AGM, gel, and flooded batteries with automatic voltage selection, dedicated charging profiles, and 8 pre-programmed charge profiles. You can reconfigure charging behavior as your battery setup changes without replacing the controller or compromising battery health.
When you're adding a small solar setup to keep batteries up, this 15-amp MPPT controller manages charging with built-in Bluetooth for setup and monitoring. It keeps output steady in changing light so your battery stays topped off.This controller supports lithium, AGM, gel, and flooded batteries with dedicated charge profiles and automatic stage control through bulk, absorption, and float.
Filters
