Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.Works with: standard bunk boards (mounts over carpet) Warranty: 1-year limited Made in the USA
Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.Works with: standard bunk boards (mounts over carpet) Warranty: 1-year limited Made in the USA
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Highlights Keeps Vertical Bunks Aligned: Wide 5" plates support tall bunk boards so the hull rides steady and loads predictably. Keeps Bunks From Twisting: Thick 1/4" steel resists flex that can cause boards to shift over time.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Highlights Keeps Vertical Bunks Aligned: Wide 5" plates support tall bunk boards so the hull rides steady and loads predictably. Keeps Bunks From Twisting: Thick 1/4" steel resists flex that can cause boards to shift over time.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
Keep your boat from drifting or rubbing the trailer. This 8" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Highlights Made for Vertical Bunks: A wide 5" plate supports tall side bunks so the hull rides steady and loads predictably. Resists Twisting: Thick steel resists twist and flex, keeping boards from walking on long hauls.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 7' long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 6-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 5-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Bunk board mounts to your boat trailer's tongue and supports the bow of your johnboat or flat-bottom boat. Has weather-resistant carpeting and a galvanized steel mounting bracket that adjusts in height and fits trailer frames up to 3" wide.Features: Carpeted, wooden bunk board supports the bow of your flat-bottom boat during trailering Marine-grade black carpeting with velvety finish is strong, soft and weather resistant Minimizes scratches on boat's hull Resists mold and mildew Rinses off easily and dries quickly Heavy-duty bracket lets you mount bunk board 5-1/2" - 8" above trailer tongue Holes in bracket allow for height adjustment Galvanized steel construction is sturdy and resists corrosion Mounting hardware included Copper-free wood is safe to use with aluminum and steel boats Made in the USA Specs: Fits: 2" and 3" wide trailer tongues Quantity: 1 bunk board Bunk board dimensions: 24" long x 1-3/4" wide x 3-3/4" tall 3-Year sun-fade warranty on carpeting This carpeted bunk board provides bow support for your johnboat or flat-bottom boat during transport and storage.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 4-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Highlights Made for Vertical Bunks: A wide 5" plate supports tall side bunks so your boat's hull rides steady and loads predictably. Resists Twisting: Thick steel resists twist and flex, keeping your bunk boards from walking on long hauls.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 3-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Loading your boat shouldn't feel like a guessing game. These bunk board guide-ons help keep everything lined up and supported as you pull in or launch. With adjustable mounting, they're built to fit your trailer and handle life on the water.Features: Bunk board guide-ons provide reliable boat alignment and support during loading and unloading 2x4 Black carpeted bunk boards help guide the boat onto the trailer Adjustable posts allow mounting 5-11" on the side of the frame or 19" high when mounted above the frame Corrosion-resistant hardware includes zinc-plated U-bolts and nuts with galvanized mounting hardware Trailer frame compatibility fits frames 2-3" wide and up to 4" high Complete kit sold in pairs with all mounting hardware included Made in the USA Specs: Overall length: 2' Frame fit: 2-3" wide x up to 4" high Quantity: 2 guide-ons Color: black/silver Weight: 20.34 lbs
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 5' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.Durable Marine Carpet: Made to handle repeated exposure to water and sun better than standard outdoor carpet. Sold in Pairs: Includes 2 bunk boards to give your boat the support it needs on your trailer. Easy Installation: Mounts directly to existing brackets with your choice of hardware for a quick, straightforward replacement.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.For even more flexibility, you can add optional bolster support swivel brackets (sold separately). Those brackets allow the top plate to pivot, giving you the ability to angle the bunks so they contour more closely to your hull.
... This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Fits 2x4 (and 2x6) Bunks: Runs standard 2x4 boards, or step up to 2x6 for more contact and support. Built for the Ramp: Hot-dip galvanized finish shrugs off road grit, spray, rain, and saltwater to help prevent rust.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.For even more flexibility, you can add optional bolster support swivel brackets (sold separately). Those brackets allow the top plate to pivot, giving you the ability to angle the bunks so they contour more closely to your hull.
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 3' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.Durable Marine Carpet: Made to handle repeated exposure to water and sun better than standard outdoor carpet. Sold in Pairs: Includes 2 bunk boards to give your boat the support it needs on your trailer. Easy Installation: Mounts directly to existing brackets with your choice of hardware for a quick, straightforward replacement.
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.Works with 2x4 and 2x6 Bunks: Runs standard 2x4 boards, or step up to 2x6 for more surface area and support. Built for the Ramp: Hot-dip galvanized finish protects against road grit, spray, rain, and saltwater to help prevent rust.
Filters
