This universal wiring kit lets you install an electric brakecontroller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way on your vehicle.Extra-long vehicles: If you drive a crew cab, extended cab with long bed, cargo van, or extended-length SUV, extra wire (ETBCXW - sold separately) will make installation much easier. Wiring Diagram for Trailer BrakeControllerInstallation
This unique brakecontroller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.A circuit tester is recommended. Once the Autowbrake is mounted and installed, plug your trailer into your vehicle and begin the calibration process. Fortunately, calibration is only required the first time you install the brakecontroller.
Towing? There's an app for that. This brakecontroller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.The Curt Echo under-dash is all about simple use and easy install. With the main unit mounted out of sight beneath the dash, all you need is your smartphone to control the settings on the brakecontroller.
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brakecontroller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.Extra-long vehicles: If you drive a crew cab, extended cab with long bed, cargo van, minivan, or extended-length SUV, 10' of extra wire (10-2-1, sold separately) will make installation much easier. 7-Way and 4-Way Trailer Connector Wiring Diagram for Trailer BrakeControllerInstallation
If you have only a 4-way flat on your vehicle and want to install a brakecontroller that pulls power from a 7-way trailer connector instead of wiring directly into your vehicle, this kit will adapt your plug for use with your brakecontroller.Features: Kit allows you to use a trailer brakecontroller that pulls power from your trailer connector instead of wiring into your vehicle Great for use with Tekonsha Prodigy RF (90250), Autowbrake (3430001), and Curt Echo (C51180) trailer brakecontrollers Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle (20') 12-Gauge wire lets you run power from your vehicle's battery to the trailer connector General Purpose Thermo-Plastic (GPT) insulation is highly resistant to acids, gasoline, oil, grease and most industrial solvents Heavy-duty, 40-amp circuit breaker protects your vehicle's electrical system by preventing overload Installation hardware included Ring terminals for battery and breaker hookup Self-tapping screws for attaching circuit breaker and ground Zip-ties for securing loose wires Note: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer application guide can be used to find the easy-to-install connector made specifically for your vehicle.
This kit lets you install the Autowbrake electric brakecontroller on your trailer. Junction box, butt connectors, and ring terminals make it easy to splice the controller into your trailer's wiring.Features Kit lets you install your Autowbrake trailer brakecontroller (3430001 - sold separately) on your trailer Junction box makes it easy to connect controller to your trailer wiring Weatherproof, heavy-duty plastic protects wires and terminals from the elements Installation hardware included Ring terminals for connecting wires to studs in junction box Heat shrink butt connectors for joining 2 lengths of wire Zip-ties for securing loose wires Mounting hardware for securing junction box to trailer frame
Includes all parts necessary to install an electric trailer brakecontroller in your vehicle.Features: Includes: 25' of Duplex wire in an abrasion resistant cover Heavy-duty 10 gauge wire Pre-wired 6 and 4 way connector with mounting bracket 6-Way connector plugs into existing 4-way trailer connector on vehicle Heavy-duty breakers: (1) 20 amp (1) 30 amp (1) 40 amp (for hot lead) Ring connectors for battery and breaker hook-up Circuit tester 2 Quick-splice connectors Self-tapping screws Tie straps Frequently Asked Questions NOTE: The blue wire goes to the center pin, the red wire goes to the outside pin. The 6 pole trailer connector can have the brakes or 12v power supply in either spot. No 4-pole Connector: If your vehicle does not already have a flat 4-Pole installed, the T-One Fitguide can be used to find the easy-to-install connector made specific for your vehicle. 6-way trailer connector
This harness gives you both 7-way and 4-way trailer connections for lights, brakes, and auxiliary power when a vehicle-specific harness is not available. Built-in converter helps prevent overloads and short circuits.Highlights Complete 7-Way and 4-Flat Kit: Supports both common trailer plug types for easy hookups. Full Electrical Functionality: Handles lighting, braking, reverse, and 12V power needs. Circuit Protection: Built-in safeguards help prevent overloads and short circuits. BrakeController Integration: Includes a dedicated wire for stop signal connection.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Installation of the BRAKE-EVN requires that you either purchase a custom wiring adapter designed to plug into the controller, or that you hardwire the controller directly into your vehicle.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Note: See etrailer.com's exclusive 7- and 4-way brake-controlinstallation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle. Proportional Braking The Tekonsha BRAKE-EVN brakecontroller comes equipped with proportional braking to give you the best towing experience.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.Features: Brakecontroller activates trailer brakes in proportion to your vehicle's braking action Automatically adjusts trailer's braking based on deceleration of tow vehicle Push-button controls are clearly labelled to make the controller easy to use Gain setting lets you adjust the amount of power sent to the trailer's brakes 3 Boost levels let you adjust initial braking power and aggressiveness Slide-bar manual override is within easy reach for controlling trailer sway or stopping in emergencies Large LED display is easy to read Shows braking output as well as diagnostics Built-in short circuit protection keeps your vehicle, trailer, and the controller safe Automatic leveling lets you mount at any angle up or down for an easy installationController must be parallel with direction of travel and horizontally level Custom, plug-in wiring harness and mounting bracket with hardware included Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited lifetime warranty Change Settings with User-Friendly Controls The controls on the BRAKE-EVN are elegantly simple and user-friendly.
Towing? There's an app for that. This brakecontroller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.Thanks to the 3-axis accelerometer, the main unit can be positioned at any angle. No matter how you install it, the unit will sense the direction of travel and deliver smooth, even braking. The easiest way to install this brakecontroller is to get a custom, vehicle-specific adapter (sold separately) that plugs right into both your vehicle and the main unit - no hardwiring required.
Towing? There's an app for that. This brakecontroller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.The Curt True Course (C94VV - sold separately) is an advanced Bluetooth sway control system that automatically triggers the trailer brakes (independent of the vehicle's brakes and the brakecontroller) when it detects dangerous trailer movement.
You can stick the control knob to the dashboard, plug in the module, and your brakecontrollerinstallation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.You don't have to worry about banging your knee on a bulky brakecontroller or interfering with your vehicle's lower airbags. The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and reach.
Stick the control knob to the dashboard, plug in the module, and the brakecontrollerinstallation is done with no drilling. Large knob is easy to use and the main unit is out of sight behind the dash. ... You don't have to worry about banging your knee on a bulky brakecontroller or interfering with your vehicle's lower airbags. The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and reach.
You can stick the control knob to the dashboard, plug in the module, and your brakecontrollerinstallation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.You don't have to worry about banging your knee on a bulky brakecontroller or interfering with your vehicle's lower airbags. The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and reach.
You can stick the control knob to the dashboard, plug in the module, and your brakecontrollerinstallation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.You don't have to worry about banging your knee on a bulky brakecontroller or interfering with your vehicle's lower airbags. The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and reach.
You can stick the control knob to the dashboard, plug in the module, and your brakecontrollerinstallation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.You don't have to worry about banging your knee on a bulky brakecontroller or interfering with your vehicle's lower airbags. The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and reach.
Filters
