Staying connected on the road takes more than campground WiFi. This rooftop system combines 5G cellular, extended WiFi, Starlink compatibility, local HDTV, GPS tracking, and Halo smart sensor support in one connected hub.Highlights One Private RV WiFi Network: Connect your devices to one network while the ConnecT manages your internet source. 5G, 4G LTE, WiFi, or Ethernet: Get online through cellular service, available WiFi, or a compatible wired internet source. Built-In HDTV Antenna: Receive free local over-the-air TV channels from towers up to 55 miles away. Starlink Compatible: Connect a compatible Starlink system through the built-in Ethernet connection.
Many RV TV antennas have to be aimed before they'll receive local HDTV broadcasts. Air 360 receives local HDTV and FM broadcasts without manual aiming, so there's nothing to point or adjust after you park.The antenna receives VHF channels 2-13 and UHF channels 14-51 along with AM and FM radio, giving your RV one rooftop antenna for local TV and radio reception.
Many RV TV antennas have to be aimed before they'll receive local HDTV broadcasts. Air 360 receives local HDTV and FM broadcasts without manual aiming, so there's nothing to point or adjust after you park.The antenna receives VHF channels 2-13 and UHF channels 14-51 along with AM and FM radio, giving your RV one rooftop antenna for local TV and radio reception.
Take your TV with you wherever your travels lead. This portable satellite antenna automatically finds compatible DISH satellites, so you can keep watching the programming you already pay for without aiming a dish by hand.Works with 1 Receiver: Connects directly to a compatible DISH HD Solo receiver for SD and HD programming. Portable Setup: Place the antenna outside your RV, then pack it away when it's time to leave. Powered Through the Coax Cable: Compatible DISH receiver powers the antenna without a separate power cable. 25' Coax Cable Included: Connects the antenna to your receiver right out of the box.
Many RV TV antennas have to be aimed before they'll receive local HDTV broadcasts. Air 360 receives local HDTV and FM broadcasts without manual aiming while its low-profile design keeps the antenna closer to the roof and out of the way.The coax cable needs to enter the roof inside the perimeter of the antenna instead of exiting beneath the flange so the base can seal correctly. The wall plate connects to 12V DC power and supplies power to the antenna through the coax, so do not install a splitter, coupler, or other connection between the wall plate and antenna.
Many RV TV antennas have to be pointed toward the broadcast tower before they'll receive the best local HDTV signal. Rayzar scans for available VHF and UHF broadcasts, then automatically positions the antenna for reception.Control Panel Included: Start searches, see results, rotate the antenna, and switch between antenna and park cable TV. Manual Fine-Tuning: Move the antenna in small increments to improve a pixelating channel or search a known location.
Hi Craig! The Replacement Shroud for Dometic Brisk RV Air Conditioner - Polar White #DMC27BQ is not the correct replacement shroud for you Brisk II air conditioner. Instead, you should use Replacement RV Air Conditioner Cover for Dometic Brisk Air II…
I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.
Hey Cory, the Curt 7k axle you have would use the grease seal #GS-2125DL. Did you damage your seal or are you wanting to have a spare on hand? The races you would need are part #25520 and #14276.
Hello Marc, thanks for reaching out. The Intelli-Power converter/ charger Model PD9260C can only charge lead acid batteries, it will not work with lithium. That said, we do have a suitable replacement for this that is lithium compatible. For that I…
I would agree that is a lot of money for a battery box to carry two Group 27 batteries. For something more affordable we have the NOCO part #329-HM408, and the part #329-HM484 which are a little bigger than needed but would still work great.
The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…
Yes it will; Lippert has verified the correct replacement for your 175226/12656 control brain is indeed the following: - Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED
It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…
Hey Joe, yes the parts you mentioned are correct for what you need. The correct control module/brain would be the part #LC53ED and the replacement control panel would be the part #LC175225. Did yours get damaged or did it stop working one day?
Hello Lee, thanks for reaching out. If air won't go in at all it could be a bad/clogged valve. You could also have a major leak somewhere. Have you tried a soap test to see if there are any leaks?
For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…
We offer the necessary replacement pigtails in many lengths for rubber hose, you can use #37207-30755 for a 2 foot length, #37207-30775 for a 3 foot length or #CAM59183 for a 4 foot length. If you'd prefer braided steel hose for durability, use…
Jensen RV antenna 90-Degree adjustable base for top or side mounting Rubber mast prevents breakage typically associated with metal mast antennas Rubber gasket provides watertight mounting 14" Tall 1-Year warranty
... The Winegard ConnecT 2.0 creates a private RV WiFi network using campground WiFi or 4G LTE, while its built-in HDTV antenna lets you watch free local TV from one rooftop system.Uses Campground WiFi or 4G LTE: Get online through available WiFi or a compatible cellular data plan. Built-In HDTV Antenna: Receive free local over-the-air TV channels without installing a separate antenna. Roof-Mounted Cellular Antennas: Elevated antennas help improve cellular reception inside your RV.
Many RV roofs have separate antennas for TV and internet. Air 360+ combines over-the-air TV with the rooftop components needed for compatible Winegard WiFi and cellular systems, so one antenna does more than just receive local broadcasts.The router mounts inside the RV directly below the Air 360+ 5G, where the built-in antenna cables connect to it. Prepare for the Gateway Now or Add It Later You don't have to install a Gateway at the same time as the antenna.
Campground internet isn't always reliable. The Winegard ConnecT 2.0 creates a private RV WiFi network using campground WiFi or 4G LTE, keeping your phones, laptops, TVs, and other devices connected through one rooftop system.Uses Campground WiFi or 4G LTE: Get online through available WiFi or a compatible cellular data plan. Long-Range WiFi Reception: Roof-mounted antennas reach available WiFi networks from up to 1.5 miles away. Roof-Mounted for Better Reception: Elevated antennas improve WiFi and cellular reception compared to devices inside your RV.
Many RV TV antennas have to be aimed before they'll receive local HDTV broadcasts. Air 360 receives local HDTV and FM broadcasts without manual aiming while its low-profile design keeps the antenna closer to the roof and out of the way.The coax cable needs to enter the roof inside the perimeter of the antenna instead of exiting beneath the flange so the base can seal correctly. The wall plate connects to 12V DC power and supplies power to the antenna through the coax, so do not install a splitter, coupler, or other connection between the wall plate and antenna.
Take your TV with you wherever your travels lead. This portable satellite antenna automatically finds compatible DISH satellites, so you can keep watching the programming you already pay for on up to 2 TVs without aiming a dish by hand.Watch 2 TVs at Once: Two coaxial outputs support separate compatible DISH receivers for different programming. Portable Setup: Place the antenna outside your RV, then pack it away when it's time to leave. Powered Through the Coax Cable: Compatible DISH receiver powers the antenna without a separate power cable. 25' Coax Cable Included: Connects the antenna to your primary receiver right out of the box.
Great for remote locations.Jensen amplified antenna Mounts easily using adhesive foam strips AM/FM Long range LED power light Requires 12-volt DC Overall dimensions: 14-1/2" wide x 7/8" tall x 3/4" deep Cable length: 7' 1-Year warranty
Replaces the antenna for your Furrion Vision 1, 2, or S wireless RV camera system.Features: Replaces the antenna for your Furrion Vision 1, 2, or S wireless camera system Works with FCN48TASF, FCE48TASL-05, FCE48TASL-07, FOS05TASF, FOS07TASF, or FOS43TASF 4-1/4" Long
Replaces the wireless antenna for your Voyager RV backup camera system (WVCMS130AP or WVSXC150).Features: Replaces the wireless antenna for your Voyager RV backup camera system (WVCMS130AP or WVSXC150) Fits: Voyager RV backup camera systems: WVCMS130AP and WVSXC150
Adjustable bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform. Folding design, with 180 degrees of rotation, provides extra clearance for city driving. ... Features: Versatile bracket lets you mount an antenna in the top channel of a crossbar or Rhino-Rack Pioneer platform Also great for mounting a flag, small LED, or spotlight Adjustable bracket provides 180 degrees of rotation Folding design provides extra clearance for city driving Elevated antenna position allows for greater reception Large opening provides ample routing space for cabling and hardware Easy installation with included hardware Can be mounted so antenna runs parallel or perpendicular to vehicle Supplemental mounting hardware lets you mount bracket to most bull bars Powder coated steel is strong and corrosion resistant Specs: Application: Rhino-Rack Pioneer platforms and most crossbars with top channels Post hole diameter: 17-mm Mounting hole diameter: 13-mm 3-Year limited warranty Note: Will only work on flush bar applications.
... Includes bolt-on steel plate for antennas with magnetic bases.Features: Bracket lets you install your antenna on your Front Runner Slimline II platform rack Position on a top or side channel Use side mount accessory bracket (FR95ZV - sold separately) to install on Front Runner Slimsport platform racks and Front Runner Slimpro van racks Dual-mounting points reduce vibration and help prevent damage to your antenna Keyhole slot and side guards protects the aerial connection at the base Bracket tilts and locks in place at 7 different angles from 0-degrees to 180-degrees Includes bolt-on steel plate to accommodate magnetic-mount antennas Black powder-coated steel resists corrosion Specs: Application: Front Runner Slimline II platform racks Quantity: 1 bracket Dimensions: 5-7/8" long x 4-3/8" wide x 4-3/8" tall Weight: 1.54 lbs 3-Year warranty Note: Not compatible with fiberglass antennas over 39" long.
Antenna extension for Voyager digital wireless system Compatible with models WVCMS130AP and WVCMS10B Includes mounting bracket, antenna, and 10' cable 1-Year warranty
Replaces the wireless antenna for your RVS wireless backup camera system.Features: Replaces the wireless antenna for your RVS wireless backup camera system Works with RVS-2CAM, RVS-4CAM, RVS-091406, RVS-091407, RVS-155W, or RVS-255W
Mount an aerial antenna or a small work light to your roof-rack crossbars with this versatile bracket. The metal bracket attaches directly to the C-channel of your Rhino-Rack Sportz crossbars and includes a 3/4" hole to mount a light or antenna.Features: Versatile yet simple design allows you to mount an aerial antenna or work light with a pedestal mount to your Rhino-Rack Sportz or Vortex crossbars Easy to reposition along your crossbars - just loosen a hand knob, then slide the bracket to new location Installs in the top channel of your crossbars Strong metal construction Specs: Post hole diameter: 3/4" Application: Rhino-Rack Sportz and Vortex crossbars Limited lifetime warranty
These brackets let you install a spotlight, antenna, or other accessory that mounts with a single bolt on your Front Runner Slimline II platform rack. Simple installation with included hardware. ... Features: Brackets let you install spotlights, antennas, or other accessories on your Front Runner Slimline II platform rack Position them on the front, side, or rear profile channel Use side mount accessory bracket (FR95ZV - sold separately) to install on Front Runner Slimsport platform racks and Front Runner Slimpro van racks Dual-mounting points reduce vibration and help prevent damage to your accessories Bracket tilts and locks in place at 90-degrees, 45-degrees, and 0-degree angles Can also be mounted upside down Black powder-coated stainless steel resists corrosion Specs: Application: Front Runner Slimline II platform racks Quantity: 2 brackets Dimensions: 3-3/16" long x 2-3/8" wide x 2-5/8" tall Weight: 3.7 ounces each 3-Year warranty
Filters
