3-Wire harness provides 12" additional inches of wiring between your tail light and trailer wiring harness. Harness has a male and female PL-3 plug.Features: Extensionharness gives you extra length when wiring your light to your trailer Designed specifically for use with stop/tail/turn lights, parking/turn lights, and warning lights with PL-3 connections Male PL-3 plug connects to light Female PL-3 plug connects to truck or trailer 3-Wire harness White wire for ground Black wire for tail light Red wire for turn signal Wire length: 12" Made in the USA
Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
One end of this no-splice harness plugs into your truck's 7-way trailer connector, and the other end runs back 120" to clear your bed-mounted camper. Also great for routing wiring to your truck bed for a 5th-wheel or gooseneck trailer.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.Features: Proportional braking - Smooth, safe, and good for your brakes long-term Fingertip control Adjust braking output and sensitivity by turning the dial Push the button to activate manual override Troubleshoot with colored LED indicators No-drill installation - Knob adheres to dash, main unit installs behind it Assembled in the USA Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob dimensions: Extension: 1-1/2" Diameter: 1-3/4" Cable length: 4' Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness How Does the Curt Spectrum Work?
Mount this 7-way connector in your aluminum truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
Designed to use with your Curt Echo In-Line brake controller for easier installation. One end of this no-splice wiring harness plugs into your vehicle's OEM socket. The other end plugs into your 7-way connector (sold separately).
Designed for use with your 24" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 28" to clear your bed-mounted camper.Features: Extends your truck's 7-way RV-style trailer connector back to clear your bed-mounted camper One end of wiring harness plugs into your existing 7-way Other end of harness has 7-way port for connecting to your trailer wiring Designed specifically to work with the 24" long TorkLift SuperTruss hitch extender (TLE1524 - sold separately) Mounting bracket for 7-way plug is included with the SuperTruss extension Installs quickly and easily - no splicing required Measures 28" long Made in the USA
Designed for use with your 60" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 68" to clear your bed-mounted camper.Features: Extends your truck's 7-way RV-style trailer connector back to clear your bed-mounted camper One end of wiring harness plugs into your existing 7-way Other end of harness has 7-way port for connecting to your trailer wiring Designed specifically to work with the 60" long TorkLift SuperTruss hitch extender (TLE1560 - sold separately) Mounting bracket for 7-way plug is included with the SuperTruss extension Installs quickly and easily - no splicing required Measures 68" long Made in the USA
Extend your factory harness to a new location or add a different style connector without having to remove your factory harness with this handy 3' extension.Features: Wiring harness extends your vehicle's 7-way RV-style trailer connector One end of wiring harness plugs into the back of your existing 7-way Other end hardwires into new connector (sold separately) Specs: Application: vehicles with factory 7-way connectors Length of extension: 3' 1-Year limited warranty 11-934 Pollak 7-Pole Blade-Style Trailer Connector - 36" Long
Designed for use with your 28" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 32" to clear your bed-mounted camper.Features: Extends your truck's 7-way RV-style trailer connector back to clear your bed-mounted camper One end of wiring harness plugs into your existing 7-way Other end of harness has 7-way port for connecting to your trailer wiring Designed specifically to work with the 28" long TorkLift SuperTruss hitch extender (TLE1528 - sold separately) Mounting bracket for 7-way plug is included with the SuperTruss extension Installs quickly and easily - no splicing required Measures 32" long Made in the USA
Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
Extension plugs into your existing 7-way, RV-style connector to route functionality from the rear of your vehicle to your truck bed for quick, easy hookup of your 5th-wheel or gooseneck trailer.
Replaces the electric steps, motor, and control unit for your Kwikee 27 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.Features: Replaces the steps, motor, and control unit for your Kwikee 27 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 14-1/2" Folded height: 7-5/8" Overall width: 30-5/8" Mounting plate dimensions: 28-7/8" wide x 11-3/4" deep Bolt pattern: 26" wide x 8-3/4" deep Step dimensions: 29" wide x 10-7/8" deep Drop/Rise: 8" Voltage: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Mount this 4-way and 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's 7-pole.
Mount this 7-way connector in your aluminum truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.Features: Proportional braking - Smooth, safe, and good for your brakes long-term Fingertip control Adjust braking output and sensitivity by turning the dial Push the button to activate manual override Troubleshoot with colored LED indicators No-drill installation - Knob adheres to dash, main unit installs behind it Plug-and-play - Custom-fit wiring harness Assembled in the USA Specs: Application: trailers with 1 to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob dimensions: Extension: 1-1/2" Diameter: 1-3/4" Cable length: 4' Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness How Does the Curt Spectrum Work?
Replaces the electric steps, motor, and control unit for your Kwikee 47 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.Features: Replaces the steps, motor, and control unit for your Kwikee 47 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps and step light to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Non-slip tread and easy-to-see reflective strips for step surface sold separately (LC165221) Made in the USA Specs: Extended height: 11-1/4" Folded height: 11-1/4" Overall width: 30-3/8" Mounting plate dimensions: 30-3/8" wide x 20-1/2" deep Bolt pattern: 29" wide x 9" deep At widest point: 17-1/2" deep Step dimensions: 26-1/4" wide x 9-3/4" deep Drop/Rise: 8-1/2" Voltage: Motor: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric steps, motor, and control unit for your Kwikee 42 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.Features: Replaces the steps, motor, and control unit for your Kwikee 42 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 9-1/4" Folded height: 9-1/4" Overall width: 30-1/4" Mounting plate dimensions: 30-1/4" wide x 24-11/16" deep Bolt pattern: 29" wide x 18" deep Step dimensions: 25-1/4" wide x 9-1/2" deep Drop/Rise: 6" Voltage: Motor: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Designed for use with your 32" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 38" to clear your bed-mounted camper.Features: Extends your truck's 7-way RV-style trailer connector back to clear your bed-mounted camper One end of wiring harness plugs into your existing 7-way Other end of harness has 7-way port for connecting to your trailer wiring Designed specifically to work with the 32" long TorkLift SuperTruss hitch extender (TLE1532 - sold separately) Mounting bracket for 7-way plug is included with the SuperTruss extension Installs quickly and easily - no splicing required Measures 38" long Made in the USA
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.Features: Proportional braking - Smooth, safe, and good for your brakes long-term Fingertip control Adjust braking output and sensitivity by turning the dial Push the button to activate manual override Troubleshoot with colored LED indicators No-drill installation - Knob adheres to dash, main unit installs behind it Plug-and-play - Custom-fit wiring harness Assembled in the USA Specs: Application: trailers with 1 to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob dimensions: Extension: 1-1/2" Diameter: 1-3/4" Cable length: 4' Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness How Does the Curt Spectrum Work?
Designed for use with your 42" long SuperTruss or Cannon receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 48" to clear your bed-mounted camper.Features: Extends your truck's 7-way RV-style trailer connector back to clear your bed-mounted camper One end of wiring harness plugs into your existing 7-way Other end of harness has 7-way port for connecting to your trailer wiring Designed specifically to work with the 42" long TorkLift SuperTruss hitch extender (TLE1542 - sold separately) or Cannon hitch extender (TLE1642 - sold separately) Mounting bracket for 7-way plug is included with the SuperTruss and Cannon extensions (mounting hardware not included) Installs quickly and easily - no splicing required Measures 48" long Made in the USA
Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
Replaces the electric step, motor, and control unit for your Kwikee 26 series RV steps. Motor and control unit automatically extend and retract the step when you open and close your door. Wiring pigtail hardwires to your RV's power.Features: Replaces the step, motor, and control unit for your Kwikee 26 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the step Control unit wires step and step light to the opening and closing of the RV door Amber incandescent light illuminates step to make it easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 7" Folded height: 7" Overall width: 25-1/4" Mounting plate dimensions: 24-1/4" wide x 10" deep Bolt pattern: 20-1/2" wide x 7-1/2" deep Step dimensions: 23-1/2" wide x 9-7/8" deep Drop/Rise: 5" Voltage: Motor: 12V Switch kit: 250V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Filters
