Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some…
view full answer...Yes you can use the Stromberg Carlson Base Pad Extreme for Campers and Trailers #SC88VR on a camper that is camping and not just storage.
view full answer...It wouldn't be a bad idea to have both the part #AM3604 and the #AM3620 for differing leveling situations as the #AM3620 is a bit taller, but you really would only ever need to use one at a time. It can only raise one side of the trailer.…
view full answer...The Ultra-Fab Super Grip Chock Wheel Stabilizers #UF21-001091 requires a 17mm box wrench according to my contact there.
view full answer...I went out to our warehouse so I could take a measurement on the CE Smith Tongue Skid #CE30002G. I found that the existing mounting hole and tab are designed to line up to bolt holes on the trailer tongue that are spaced apart by 4 inches, on…
view full answer...The closest metric trailer tire size to a 4.80x12 is going to be a 145/80-12. The typical diameter of a 4.80x12 tire is 20.5 inches. On a 145/80-12, it is 21.3 inches. So the metric size will be a little over 1/4 inch taller. Make sure to measure…
view full answer...The weight capacity should be listed on the side of your trailer tires but since there are a couple different Load Ranges in your tire size of 4.80-12 you could either have a tire capacity of 785 lb if you have a Load Range B like #AM10060 or 990 lbs…
view full answer...Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…
view full answer...There would be a noticeable difference if you had both the Aero Pro light #STL37RB and the Glolight, #STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the…
view full answer...I'd love to help but we don't have any hubs for this axle as it's appears very odd and uncommon. The best option we can offer is a new axle. In order to choose the correct replacement axle for a trailer you'll first want to start with…
view full answer...I assume you are referring to butt connectors and if that is the case then these can very well be the cause of your issue as they can trap corrosion over time and cause problems. If you test for power on the wire going into the connector and then…
view full answer...You would need the heat shrink tubing for 18 to 14 gauge wire #DW05452 for trailer tail light #STL37RB. On a boat trailer I would not use crimp style connectors like butt connectors because the chance that a wire could pull out due to broken strands…
view full answer...Filter Your Search
Contact and Help