It's usually a guess if the tongue weight is right, but with this jack, you don't have to. You press the switch, the trailer drops, and the number shows up while you're standing right there. ... Highlights Built-In Scale: Shows your tongue weight as you lift so you can adjust before hitting the road. Electric Lift with Backup Crank: Raise and lower your trailer at the push of a button or crank by hand if needed. 3,500 lb Capacity: Strong enough for campers, cargo haulers, and most A-frame trailers.
This electric jack lifts with push-button control using compatible Milwaukee batteries you already own. The built-in tongue weight scale lets you confirm tongue weight while hitching instead of reaching for a separate scale before towing.Highlights Check Tongue Weight While You Hitch: Built-in digital scale displays real-time tongue weight as you raise your trailer for hookup. Push-Button Lifting for Heavy Tongue Loads: 3,500-lb lift capacity raises your trailer without manual cranking during hitching.
This electric jack lifts with push-button control using compatible DeWalt batteries you already own. The built-in tongue weight scale lets you confirm tongue weight while hitching instead of reaching for a separate scale before towing.Highlights Check Tongue Weight While You Hitch: Built-in digital scale displays real-time tongue weight as you raise your trailer for hookup. Push-Button Lifting for Heavy Tongue Loads: 3,500-lb lift capacity raises your trailer without manual cranking during hitching.
Carry 2 e-bikes on your trailer tongue where you can see them in the rearview mirror. Fits most tongue jacks up to 23" tall and includes wheel cradles, bolt-on hardware, and 8 CAM buckle straps.Works with Most Tongue Jacks Up to 23 Inches Tall: Compatible with electric and manual jacks up to 23 inches tall. Wheel-Hold Support, Not Frame Clamps: Cushioned cradles support your bikes by the wheels to reduce frame contact.
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. Retractable tongue offers compact storage. Aluminum diamond tread fenders create a stylish look.Compact, Vertical Storage This MicroSportXT trailer has a retractable tongue and rubber bumpers, allowing you to store the trailer vertically. To retract the tongue, remove the metal pin and clip holding the tongue in place and disconnect the wiring harness that runs through the tongue.
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through a direct 12V power connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 3,500 lb electric jack raises and lowers your trailer through a direct 12V power connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 3,500 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack.
This winch stand mounts to your boat trailer tongue and lets you adjust its position up to 48" for smooth loading and launching. The heavy-duty 3" x 4" post features a 45-degree angled design and a corrosion-resistant finish.Features: Adjustable winch stand assembly for mounting a winch Heavy-duty 3" x 4" upright post provides strong support Compatible with many 2,000 lb to 3,500 lb trailer winches, including DL2000A, DL2500A, DL3200A, T2605S, T2605, T2000S, T3205, WINCH 2500, and WINCH 3500 45-degree angled design helps align the winch with the bow stop and boat eye Adjustable height up to 48" for proper winch positioning Corrosion-resistant, hot-dipped galvanized finish for marine and utility trailer use Specs: Application: Boat trailer winch stand Top mounting plate dimensions: 12" long x 5" wide Bottom mounting plate dimensions: 15" long x 5" wide Post dimensions: 3" x 4" Maximum height: 48" Minimum height: 26" Angle: 45 degrees Finish: Hot-dipped galvanized Quantity: 1 winch stand assembly
This roller assembly attaches to your 3" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features a 5" rubber spool roller, galvanized steel brackets and all mounting hardware.Features: Keel roller supports your boat's keel as it sits on the trailer Makes it easier to load and unload your boat Helps to absorb road shock while boat is being trailered Sturdy, corrosion-resistant brackets let you bolt roller assembly onto the tongue of your boat trailer Multiple mounting holes allow you to adjust the position and accommodate different trailer frame heights Mounting hardware is included Black rubber spool roller delivers long-lasting performance Made in the USA Specs: Fits 3" trailer tongues Height: 11-1/2" Offset: 1" Diameter of bolt holes (each): 3/8" These mounting brackets sandwich around the trailer's tongue and attach with included 3/8" diameter bolts.
This roller assembly attaches to your 2" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features a 4" rubber spool roller, galvanized steel brackets and all mounting hardware.Features: Keel roller supports your boat's keel as it sits on the trailer Makes it easier to load and unload your boat Helps to absorb road shock while boat is being trailered Sturdy, corrosion-resistant brackets let you bolt roller assembly onto the tongue of your boat trailer Multiple mounting holes allow you to adjust the position and accommodate different trailer frame heights Mounting hardware is included Black rubber spool roller delivers long-lasting performance Made in the USA Specs: Fits 2" trailer tongues Height: 11-1/2" Offset: 1" Diameter of bolt holes (each): 3/8" These mounting brackets sandwich around the trailer's tongue and attach with included 3/8" diameter bolts.
This roller assembly attaches to your 2" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features galvanized steel brackets and a 4", non-marking, TPR spool roller.Features: Keel roller supports your boat's keel as it sits on the trailer Makes it easier to load and unload your boat Helps to absorb road shock while boat is being trailered Sturdy, corrosion-resistant brackets let you bolt roller assembly onto the tongue of your boat trailer Multiple mounting holes allow you to adjust the position and accommodate different trailer frame heights Mounting hardware is included Yellow, thermal-plasticized rubber (TPR) roller delivers superior long-lasting performance TPR material is non-marking, stronger than rubber and softer than polyurethane Made in the USA Specs: Fits 2" trailer tongues Height: 11-1/2" Offset: 1" Diameter of bolt holes (each): 3/8" These mounting brackets sandwich around the trailer's tongue and attach with included 3/8" diameter bolts.
Trailer tongue tire carrier mounts your spare tire up and out of the way. Base attaches around trailer tongues up to 4" tall x 3-1/2" wide. ... Features: Provides a mounting point for your trailer's spare tire Black powder coat finish offers excellent corrosion resistance 500-Hour salt spray rating Trailer installation mounting hardware included Spare tire installation hardware not included Made in the USA Specs: Secures around trailer tongue up to 4" tall x 3-1/2" wide Fits: bolt patterns from 4 on 4" to 8 on 6-1/2"
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Lift makes this jack ideal for multiple agricultural and commercial applications.Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
Trailer tongue tire carrier mounts your spare tire up and out of the way. Base attaches around trailer tongues up to 4" x 4". Accepts wheel bolt pattern from 4 on 4" to 8 on 6-1/2". ... Features: Provides a mounting point for your trailer's spare tire Silver powder coat finish offers excellent corrosion resistance 500-Hour salt spray rating Trailer installation mounting hardware included Hardware to mount spare tire on carrier not included Made in the USA Specs: Secures around trailer tongue up to 4" x 4" Fits: bolt patterns from 4 on 4" to 8 on 6-1/2" Distance between trailer frame mounting holes (center to center): 5" Side to side 4" Front to back
Tongue mounted crossbar provides a mid-point attachment system for extra-long boats. Designed for those who prefer less rear boat overhang. ... Specs: Cross bar dimensions: 78" long x 1-1/4" wide 5-Year Limited warranty Features: Tongue mounted crossbar with hardware for Malone MicroSport trailers Provides a mid-point attachment system for extra-long boats Minimizes rear boat overhang Multiple kayaks or bicycle combinations Great for extra gear Plastic coated steel construction Corrosion resistant mounting plate, arm and load bar brackets Includes: single bar, support and hardware
Bunk board mounts to your boat trailer's tongue and supports the bow of your johnboat or flat-bottom boat. Has weather-resistant carpeting and a galvanized steel mounting bracket that adjusts in height and fits trailer frames up to 3" wide.Features: Carpeted, wooden bunk board supports the bow of your flat-bottom boat during trailering Marine-grade black carpeting with velvety finish is strong, soft and weather resistant Minimizes scratches on boat's hull Resists mold and mildew Rinses off easily and dries quickly Heavy-duty bracket lets you mount bunk board 5-1/2" - 8" above trailer tongue Holes in bracket allow for height adjustment Galvanized steel construction is sturdy and resists corrosion Mounting hardware included Copper-free wood is safe to use with aluminum and steel boats Made in the USA Specs: Fits: 2" and 3" wide trailer tongues Quantity: 1 bunk board Bunk board dimensions: 24" long x 1-3/4" wide x 3-3/4" tall 3-Year sun-fade warranty on carpeting This carpeted bunk board provides bow support for your johnboat or flat-bottom boat during transport and storage.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Replaces the extra-long trailer tongue for your CE Smith multi-sport trailer (CE48810 or CE48870). Tongue measures 90" long.Features: Replaces the extra-long trailer tongue for your CE Smith multi-sport trailer (CE48810 or CE48870) Galvanized steel finish is great for saltwater applications Tongue dimensions: 90" long x 2" wide x 3" tall Fits: CE Smith multi-sport trailers: CE48810 and CE48870
Retractable tongue kit for Malone MicroSport trailer Upgrades the tongue on your MicroSport trailer (MPG460G) Replaces a damaged tongue on your MicroSportXT trailer (MPG460XT) Quickly retract tongue back into MicroSport trailer frame to help eliminate storage issues Allows trailer to be stored vertically Decreases trailer length by 61" Includes rear rubber bumpers and hitch pins 5-Year warranty Made in the USA Note : The tongue must be fully extended while driving.
Trailer tongue kick stand Replaces standard tongue skid plate on Malone trailers Fits XtraLight (MPG525G), MicroSport (MPG460G), and MicroSportXT (MPG460XT) trailers Large integrated wheel allows trailer to be easily rolled to desired location Keeps trailer level when unhitched and makes it easier to connect to tow vehicle Spring release locks wheel assembly into down position for use or in up position for travel
Filters
