Tow your fifth-wheel trailer with your gooseneck hitch and get the smooth ride that only an air-ride-equipped coupler can deliver. This goosebox and coupler adapter kit has a built-in air bag and bumpers that reduce chucking and absorb road shock.Features: 5th-Wheel-to-gooseneck adapter kit lets you tow your 5th-wheel trailer with your gooseneck hitch Heavy-duty goosebox replaces Lippert 1716, 1116, 0115, or FabEx 500, 503, 520, 530, 560 pin boxes Coupler attaches to your truck's gooseneck hitch ball Shock-absorbing coupler uses an air bag and cushioned bumpers to provide a smooth and comfortable ride Limits chucking and jerking to give you better control of your vehicle and trailer Helps extend the life of your truck and trailer by protecting them from unnecessary wear and tear Easy-to-use, lockable lever lets you connect and disconnect the coupler from the hitch ball Simply use the lever to engage or disengage the locking mechanism Dual locking bars hold ball in place to provide added security and help reduce rattle Adjustable air bag lets you easily adapt the coupler to suit your trailer's load Ensures just enough shock absorption for your setup and not so much as to cause a stiff ride Grease zerk fitting at the pivot point makes lubrication and maintenance easy Steel tubing and 4140 cast steel socket provide maximum durability Shot blasted and powder coated to prevent rust Made in the USA Specs: Designed to replace the following pin boxes: Lippert 1716, 1116, and 0115 FabEx 500, 503, 520, 530, and 560 Ball size: 2-5/16" Gross towing weight: 24,000 lbs Vertical load limit (maximum tongue weight): 6,000 lbs Coupler stem outer diameter: 4" Distance between pin holes: 2-5/8" 1-Year limited warranty Notes: You will need safety chain adapters to install your mandatory safety chains.
... The Demco eZ-Latch coupler auto-locks during hookup, and the bolt-on design fits select Lippert and FabEx pin boxes.Auto Latching Coupler: Demco eZ-Latch Coupler locks onto the ball as you lower it into place. Direct Bolt-On Fit: Mounts in place of select Lippert and FabEx pin boxes using existing mounting points. Adjustable Height: Three adjustment holes let you change coupler height for trailer leveling.
Your 5th wheel trailer transfers every bump and surge into your truck. This conversion kit replaces the pin box with an air cushioned gooseneck connection that absorbs that movement at the hitch and gives you a smoother, more controlled tow.Once it's mounted, you're ready to drop in the air coupler and enjoy a quieter, more stable ride, and add the safety chain kit (SHK35MR - sold separately) to complete the gooseneck setup. Specs Application: Replaces Lippert 1716, 1116, and 0115, and FabEx 500, 503, 520, 530, and 560 pin boxes Ball size: 2-5/16" Adjustment Specifications: Number of adjustment holes: 3 Hole spacing: 2-3/4" Vertical adjustment range: 8" Forward Offset: Offset: 3" Tube Dimensions: Outer tube: 4" diameter Outer sleeve thickness: 1/4" Weight Capacity: Gross towing weight: 24,000 lbs Vertical load limit (maximum tongue weight): 6,000 lbs Construction: Black and red powder coated steel Warranty: 1-Year Notes: Towing capacity is limited by the lowest rated component in your setup.
Experience smooth, stable towing with your fifth-wheel trailer by replacing your ordinary pin box with an air-ride-equipped model. The scissoring action of the coupler allows the interior air bag to absorb road shock so that you won't feel it.Features: Air ride pin box replaces standard pin box on your 5th-wheel trailer to enhance performance Cushions and absorbs road shock Improves handling and overall ride Limits strain on truck and trailer frames Scissor action allows pin box to compress, compensating for jarring and bounce Internal air bag absorbs the road shock Built-in spring ensures that pin box rebounds - keeps air bag from breaking down Direct replacement for OEM pin box King pin connects to any 5th-wheel trailer hitch Sturdy steel construction Specs: Designed to replace the following pin boxes: Fabex 730 RBW 7019 Weight capacity: 21,000 lbs 1-Year warranty Notes: Not for use with any type of gooseneck adapter Because of the size of this item, it ships via truck freight Eliminate the bounce from your ride with the Trailair air ride coupler.
This shock-absorbing pin box provides a smooth, safe ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. 4.5K pin weight.In order for the pin box's shock absorption to work correctly, make sure your pin weight is within the pin weight range. Because the Gen-Y Hitch Executive is shorter than the Fabex 665 or M&M 665 pin box, the clearance between your trailer and tow vehicle during turns might be reduced. Calculated Tongue Weight Executive Tongue Weight Capacity Required 1,600-2,599 lbs 3,500 lbs 2,600-3,599 lbs 4,500 lbs 3,600-4,599 lbs 5,500 lbs 4,600-5,599 lbs 6,500 lbs 5,600-6,599 lbs 7,500 lbs 6,600-7,599 lbs 8,500 lbs 7,600-8,599 lbs 9,500 lbs Built-In Shock Absorption for a Smooth Ride If you've ever towed a fifth-wheel trailer before, you're no stranger to road shock.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Auto-latch allows for easy hookup. 4.5K pin weight.To calculate correct pin weight for Gen-Y hitches, use this formula: GVWR x 0.22 Because the Gen-Y Hitch Executive may be shorter than the Fabex 665 or M&M 665 pin box, the clearance between your trailer and tow vehicle during turns might be reduced. Calculated Pin Weight Executive Pin Weight Capacity Required 1,600-2,599 lbs 3,500 lbs 2,600-3,599 lbs 4,500 lbs 3,600-4,599 lbs 5,500 lbs 4,600-5,599 lbs 6,500 lbs 5,600-6,599 lbs 7,500 lbs 6,600-7,599 lbs 8,500 lbs 7,600-8,599 lbs 9,500 lbs Fifth Wheel to Gooseneck Adapter Say your truck has a gooseneck hitch for towing your horse trailer, but you want to go camping with your new fifth wheel.
Experience smooth, stable towing with your fifth-wheel trailer by replacing your ordinary pin box with an air-ride-equipped model. The scissoring action of the coupler allows the interior air bag to absorb road shock so that you won't feel it.Features: Air ride pin box replaces standard pin box on your 5th-wheel trailer to enhance performance Cushions and absorbs road shock Improves handling and overall ride Limits strain on truck and trailer frames Scissor action allows pin box to compress, compensating for jarring and bounce Internal air bag absorbs the road shock Built-in spring ensures that pin box rebounds - keeps air bag from breaking down Direct replacement for OEM pin box King pin connects to any 5th-wheel trailer hitch Sturdy steel construction Specs: Designed to replace the following pin boxes: Fabex 750, 765 and 770 RBW 7028 Weight capacity: 21,000 lbs 1-Year warranty Notes: Not for use with any type of gooseneck adapter Because of the size of this item, it ships via truck freight Eliminate the bounce from your ride with the Trailair air ride coupler.
... A capture plate is required for towing with a SuperGlide. This quick-connect model is designed for Fabex pin boxes with skid plates that are 13-1 ... Features: Allows you to tow your 5th wheel with the PullRite SuperGlide hitch Attaches to the skid plate on your trailer's pin box Keeps the king pin from rotating in the hitch head Transfers turning movement to the hitch so it can automatically glide, providing clearance for sharp turns Works with Fabex pin boxes (500 Series, 765, and 770) Skid plate on pin box must measure 13-1/2" wide Resists corrosion with durable, black powder coat 5-Year limited warranty
... A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.Features: Allows you to tow your 5th wheel with the PullRite SuperGlide hitch Attaches to the skid plate on your trailer's pin box Keeps the king pin from rotating in the hitch head Allows movement of trailer to be transferred to hitch so it can automatically glide to provide the clearance you need for 90-degree turns Works with Fabex pin boxes Skid plate on pin box must measure 12" wide Resists corrosion with durable, black powder coat 5-Year limited warranty
PullRite 5th-wheel hitches require the king pin to remain fixed inside the hitch head. This capture plate bolts onto compatible Lippert and Fabex pin boxes to prevent rotation and allow the hitch to operate correctly.Designed for Specific Pin Boxes: Fits Lippert 1621, 1621HD, 1716, and Fabex 770. Simple, Permanent Solution: Secures the king pin without ongoing adjustment. Specs Application: Lippert 1621, 1621HD, and 1716 pin boxes Fabex 770 pin boxes Warranty: 5-year limited
Switching from a bulky fifth wheel hitch to haul cargo often requires removing heavy hardware from your bed. This pin box converts your trailer to a gooseneck, reducing in-bed equipment while adding dual-axis cushioning for smoother towing.Coupling lines up with a broader target, and the easy-reach latch cable releases the coupler from an accessible position. Specs Compatibility: Lippert 1621, 1621HD, 0719, Fabex PB 600 Series Capacity: Max trailer weight capacity: 25,000 lbs Max tongue weight: 3,250 lbs
Switching from a bulky fifth wheel hitch to haul cargo leaves you lifting heavy hardware out of your bed. This pin box converts a Lippert Rhino trailer to a gooseneck with dual axis cushioning, so you can tow smoother and keep your bed clear.Coupling lines up with a broader target, and the easy-reach latch cable releases the coupler from an accessible position. Specs Compatibility: Lippert 1621, 1621HD, 0719, Fabex PB 600 Series Capacity: Max trailer weight capacity: 25,000 lbs Max tongue weight: 4,500 lbs
... The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Travel: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Put them where you want them Includes bolts and hardware Swivel design. Pivots down for use, up for storage, and pins in place Sidewinder handle. Easy to use! Zinc finish resists rust - and looks good! Stabilizing footplate. Keeps jack from sinking into soft ground Built-in grease zerk.
... Durable screw offers increased strength. Built-in grease zerk allows simple greasing. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Features: Landing gear set lets you raise and lower your trailer Ideal for standard agricultural, construction, and industrial trailer applications 2 Speeds make cranking faster and easier Low gear offers full lifting power at a ratio of 1" every 34-1/2 turns High gear provides ultimate speed with 1" for every 4-1/2 turns Traditional gearbox requires you to reposition crank to switch gears Drop legs with spring return increase overall extension for maximum adjustability Plunger pins positioned to the side Footplates minimize sinking in soft ground Landing gear welds onto trailer frame Sidewind handle and connecting rod included Specs: Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 50,000 lbs 25,000 lbs per jack Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
... The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black power coated outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Bolt-on installation Specs: Bracket height (from bottom of footplate to bottom of bracket): 7-1/8" Retracted 22-3/8" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Clearance: 17-5/8" from bottom of bracket to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Filters
