Curt RockerBall with ShockDrop technology bolts onto standard ball mounts to provide comfort and control while towing. Durable, chrome ball has a 1" diameter x 2-1/8" long shank. Anti-swivel, forged steel base has black powder coat finish.
Extend your trailer hitch receiver opening so that your can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.
No matter which way you flip it, this 2-ball drop hitch is basically all you'll ever need. We know it looks pretty standard, but its tight tolerances mean you can forget about annoying rattle. And it has 2 layers of rust protection.How to Measure Drop on an Adjustable BallMount
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.The fan then circulates the air inside your RV like a ceiling fan. The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture. Flush-Mounted Keypad The flush-mounted keypad on the vent enables you to operate the fan, including turning the fan on or off.
Ball mount includes 2 hitch balls to fit your application. Tow up to 12,000 lbs with the 2" ball; or 16,000 lbs with the 2-5/16" ball. Hitch pin and clip or hitch lock sold separately.
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Built-in slider helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access.But these adapters often require modifications to your trailer that can void the warranty. Another option would be using fifth-wheel rails that mount directly to your gooseneck hitch, usually by dropping into the hitch's ball hole. But to do this you have to make 2 separate purchases - the adapter plate that has the rails and a standard fifth-wheel hitch.
Designed for wide 2" and standard 2-1/2" hitches, this hitch lock has a covered keyhole and chrome plating to help prevent corrosion. Steel construction ensures long-lasting dependability. Can be keyed alike to match other etrailer locks.
Use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch and extend your trailer hitch receiver opening with the same piece. Sturdy, black powder coated steel construction.
Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Ballmount length: 7-1/2" from center of hitch pin hole to center of ball hole Drop: 2" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
Pop it into your hitch and tow - no assembly required! We designed this forged ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Ball diameter: 2" Ballmount length: 8" from center of hitch pin hole to center of ball hole Drop: 2" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.The fan then circulates the air inside your RV like a ceiling fan. The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture. Flush-Mounted Keypad The flush-mounted keypad on the vent enables you to operate the fan, including turning the fan on or off.
Pop it into your hitch and tow - no assembly required! This ball mount's 2-3/4" rise is perfect if you're towing with a minivan or SUV with little ground clearance. Includes 2 layers of rust protection and a black nickel-plated ball.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Ballmount length: 8" from center of hitch pin hole to center of ball hole Rise: 2-3/4" from top of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Ballmount length: 8-1/4" from center of hitch pin hole to center of ball hole Drop: 4" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
Pop it into your hitch and tow - no assembly required! We designed this ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2-5/16" Ballmount length: 7-1/2" from center of hitch pin hole to center of ball hole Drop: 2" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
Pop it into your hitch and tow - no assembly required! We designed this deep-drop ball mount with 2 layers of rust protection and included a pre-torqued, black nickel-plated ball for a long-lasting hitch that looks great.Features: Get everything you need to embark on your towing journey with confidence Shank slides into your vehicle's hitch receiver Ball provides the connection point for your trailer's coupler Pin and clip secure the mount in place Just hook up and go, no need to borrow a torque wrench to get set up Hitch ball comes pre-torqued to factory specifications Stop the rattle - hitch pin fits tightly to minimize movement Quit worrying about rust Matte black powder coat - which looks great with our etrailer receiver hitches - sits on top of an e-coat for maximum protection Black nickel plating on ball and hitch pin resists corrosion and offers a sleek look Trust in the durable, long-lasting steel construction Specs: Application: 2" x 2" trailer hitch receiver Gross towing weight: 7,500 lbs Tongue weight: 750 lbs Ball diameter: 2" Ballmount length: 8-1/2" from center of hitch pin hole to center of ball hole Drop: 6" from bottom of inside of hitch opening Limited lifetime warranty Double-Duty Corrosion Resistance Most ballmounts have just 1 layer of paint or powder coat to protect them from the outside world.
This manual-lift roof vent has a reversible, 4-speed fan and a thermostat to regulate airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. Removable bug screen keeps insects out.The fan then circulates the air inside your RV like a ceiling fan. The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture. Flush-Mounted Keypad The flush-mounted keypad on the vent enables you to operate the vent and fan, including opening or closing the dome and turning the fan on or off.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.Unlike models that are unable to release heat and pressure, this vented actuator can be safely mounted inside of a compartment on your trailer. As a result, this actuator is great for gooseneck and fifth-wheel trailers where finding space on the tongue can be nearly impossible.
The Continuum is so quiet, you might forget its there. This system works with your standard coupler and a 2-1/2" hitch, plus it has a 4" extended shank for extra clearance when hooking up.
Elongated seat, taller height, and glazed ceramic make this RV toilet more comfortable and easier to clean than plastic. No more awkward balancing or cramped bowls, just real support and the simple pleasure of feeling at home on the road.Specs: Rough in: estimated minimum 10" Overall height: Lid closed: 19" Lid opened: 34-7/8" Seat height: 17-3/4" Bowl dimensions: Overall: 14-1/8" wide x 20-1/2" long Center of flush ball to rear edge: 8-1/2" Center of flush ball to front edge: 12" Weight capacity: 300 lbs Toilet weight: 36.5 lbs Color: white Warranty: 4 year
The Continuum is so quiet, you might forget its there. This system works with your standard coupler and a 2" hitch, plus it has a 4" extended shank for extra clearance when hooking up.
This secure anti-rattle hitch lock dramatically reduces movement and vibration in your towing setup. Extra-long pin fits wide 2-1/2" GM and 2" Toyota hitches. Designed for use with hollow-shank ballmounts and accessories. 5/8" Pin.Features: Trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ballmount or hitch-mounted accessory Secure your bike rack, cargo carrier, hitch cover, and more to your trailer hitch Anti-rattle pin reduces play and vibration in the hitch connection Place block with spring inside shank of ballmount or hitch accessory Slide ballmount or accessory into hitch receiver Insert pin through hitch pin hole and anti-rattle block with spring Twist pin so ballmount or accessory is pulled tight against side of hitch receiver wall 90-Degree, barrel-style lock swivels for easy access in tight spaces Includes 2 rubber-capped, stainless steel keys Weather-resistant rubber dust cap keeps cylinder free of debris Extra-long pin accommodates wide factory 2" hitch receivers from Toyota and 2-1/2" hitch receivers from GM Chrome finish is self-lubricating and corrosion resistant Sturdy steel construction Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Also fits wide factory 2" Toyota hitch receivers and 2-1/2" GM hitch receivers Ballmount or hitch accessory must have a hollow shank Pin diameter: 5/8" Inside pin length (span): 3-7/8" Overall length: 6-3/4" Note: This device can only be used with hollow-shank ballmounts and hitch accessories.
Elongated seat, taller height, and glazed ceramic make this RV toilet more comfortable and easier to clean than plastic. No more awkward balancing or cramped bowls, just real support and the simple pleasure of feeling at home on the road.Specs: Rough in: estimated minimum 8-1/2" Overall height: Lid closed: 19" Lid opened: 34-7/8" Seat height: 17-3/4" Bowl dimensions: Overall: 14-1/8" wide x 20-1/2" long Center of flush ball to rear edge: 8-1/2" Center of flush ball to front edge: 12" Weight capacity: 300 lbs Toilet weight: 36.5 lbs Color: white Warranty: 4 year
Anodized aluminum electric-hydraulic actuator with control adapter module (CAM) lets you use your Ford, Chevy, or GM factory brake controller to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and hardware.Unlike models that are unable to release heat and pressure, this vented actuator can be safely mounted inside of a compartment on your trailer. As a result, this actuator is great for gooseneck and fifth-wheel trailers where finding space on the tongue can be nearly impossible.
Filters
