Automatically level and stabilize your fifth-wheel RV with this electronic levelingsystem. 4 Precise, motorized jacks can be operated by either the included touchpad. ... Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electric levelingsystem. The motorized leveling legs eliminate the need for labor-intensive, manual scissor jacks.
Automatically level and stabilize your fifth-wheel RV with this electronic levelingsystem. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electric levelingsystem. The motorized leveling legs eliminate the need for labor-intensive, manual scissor jacks.
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electric levelingsystem. The motorized leveling legs eliminate the need for labor-intensive, manual scissor jacks.
Replaces the control module for your Lippert 6-Point Ground Control 3.0 electric levelingsystem (2021106810). Compatible only with fifth-wheel RVs prepped for Ground Control 3.0.Features: Replaces the control module for your Lippert 6-Point Ground Control 3.0 electric levelingsystem (2021106810) Compatible only with 5th-wheel RVs prepped for Ground Control 3.0 Mounts inside a front exterior storage compartment - hardware not included Connects directly to your 12-volt battery with wiring harness Fits: Part number 2021106810 , Lippert 6-Point Ground Control 3.0 levelingsystem for prepped fifth-wheel RVs Note: If your fifth-wheel RV is prepped for Ground Control 3.0, you will see a green prepped wire and/or indication on the exterior of your fifth-wheel RV.
Perfect for fifth wheels with Equalizer levelingsystems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your 5thwheel's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your camper to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your 5thwheel Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: 5th-wheel campers (see chart below) with Equalizer levelingsystems and (4) 10" octagonal and (2) 11-/2" or 12" round jack feet Dimensions: 10" Octagonal pads: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 12" Round pads: 13-1/4" long x 13-1/4" wide x 2-3/4 " tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for fifth wheels and motorhomes with Lippert levelingsystems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your 5thwheel or Class A, B, or C motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: 5th-wheel campers and Class A, B, and C motorhomes (see chart below) with Lippert levelingsystems and (4) 9" round jack feet Dimensions: 11" long x 11" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for fifth wheels and toy haulers with Lippert levelingsystems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your 5thwheel or toy hauler's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: 5th-wheel campers and toy haulers (see chart below) with Lippert levelingsystems and (6) 9" round jack feet Dimensions: 11" long x 11" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for fifth wheels and motorhomes with Quadra BigFoot levelingsystems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your 5thwheel or Class A, B,or C motorhome's Quadra BigFoot leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Fifth wheels and Class A, B, and Class C motorhomes (see chart below) with Quadra BigFoot levelingsystems and (4) 10" octagonal jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-1/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 9" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.The leg stays aligned while the foot sits flatter on the ground, which helps the entire levelingsystem work the way it was intended. Instead of wondering if a soft site will leave you re-leveling in the morning, the jack stays aligned, the load stays distributed, and your levelingsystem holds its position overnight. 9" Footprint That Spreads the Load Soft soil, gravel pads, sandy lakeside sites, they all test small jack feet.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 9" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.Highlights Correct Replacement Fit: Replaces standard 2" square leveling jack leg foot pads on 5thwheel landing gear. Spreads Load Over Soft Surfaces: 9" Footprint distributes weight to reduce sinking.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 12" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.Highlights Correct Replacement Fit: Replaces standard 2" square leveling jack leg feet pads on 5thwheel landing gear. Stays Seated on Uneven Ground: Articulating ankle pivots up to 10° to match ground contours.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 9" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.Highlights Correct Replacement Fit: Replaces standard 2" round leveling jack leg feet pads on 5thwheel landing gear. Spreads Load Over Soft Surfaces: 9" Footprint distributes weight to reduce sinking.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 12" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.Highlights Correct Replacement Fit: Replaces standard 2" round leveling jack leg feet pads on 5thwheel landing gear. Stays Seated on Uneven Ground: Articulating ankle pivots up to 10° to match ground contours.
Replaces a right-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point levelingsystem (LC675817). Includes mounting plate and attached foot plate.Features: Replaces 1 right-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point levelingsystem (LC675817) Includes mounting plate and attached foot plate Specs: Total lift: 12-1/2" Overall height: Retracted: 22-1/2" Extended: 35" Capacity: 5,000 lbs
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic levelingsystem (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.Features: Replacement left rear leg for your Lippert Ground Control 3.0 electric levelingsystem (LC358590 or LC675817) Leg includes the mounting bracket needed for installation Snapper pin to attach footpad (LC225598) is sold separately Specs: Total lift: 12-1/2" Overall height: Retracted: 24-1/2" Extended: 36-3/4" Capacity: 5,000 lbs
Lose a landing gear foot pad at the campsite? This replacement gives you a simple way to get your setup back on track with a secure fit and solid support, so your trailer stays stable when it matters most.Features: Landing gear foot pad replaces the original component on 5thwheel trailers to restore proper support and stability Compatibility is designed for standard Lippert fifth wheel landing gear jacks Function provides a stable base to help support the trailer during setup and leveling Installation process supports quick and easy DIY replacement Construction uses steel for strength and durability Kit includes jack foot, clevis pin, and bridge clip Made in the USA Specs: Base plate: 5" wide x 8" long Pin slot: 1-1/2" wide 1-Year warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Holes in hitch cup provide a space for a padlock (sold separately) to prevent removal of king pin Collapsible design Tripod folds up for storage Extension legs (UF19-950002 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 5,000 lbs Height: 31" - 54" Footplate dimensions: 5" wide x 5-1/2" long King pin cup measures 3-1/4" across and 4-1/2" deep Fits king pins up to 3-1/4" diameter Weight: 29 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Extension legs (UF19-950002 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 5,000 lbs Height: 37" - 50" Footplate dimensions: 5" wide x 5-1/2" long Weight: 24 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted feeling, like your rig's anchored in place.Ratchet Strap Keeps Your Trailer Planted: Tightening the strap pulls arms in and anchors footpads, boosting overall trailer support. Made for 5thWheels and Trailers with I-Beam Frames: Fits rigs with open I-beams and 12" of clearance below the frame. Features to know about Stops the Sway Instantly Stepping inside and feeling your whole rig shift is enough to make anyone wish for a sturdier setup.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. ... Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Quickly and easily stabilize your unhitched fifth-wheel trailer with this rustproof, lightweight aluminum tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Extension legs (UF19-950202 - sold separately) available for applications requiring additional height Large footplates help to prevent sinking and tilting Rustproof, lightweight aluminum construction Specs: Support capacity: 1,200 lbs Height: 34" - 52" Footplate dimensions: 5" wide x 5-1/2" long Weight: 16 lbs Lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Features: Tripod holds your parked 5th-wheel trailer steady at the king pin Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV Threaded hitch cup allows for easy height adjustment Turn the handle counterclockwise to raise cup, clockwise to lower it Included padlock inserts through holes in hitch cup to prevent removal of king pin Collapsible design Handles fold down once desired height is reached Tripod folds up for storage Quick latches let legs extend additional 27-1/2" Large footplates help to prevent sinking and tilting Heavy-duty steel construction Specs: Support capacity: 1,200 lbs Height: 33" - 62" Footplate dimensions: 5" wide x 5-1/2" long Weight: 25 lbs Limited lifetime warranty After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer.
Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. ... Features: Cross braces permanently attach to your 5thwheel's landing gear to reduce your trailer's movement while parked Braces extend and retract with landing gear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landing gear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landing gear legs.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. ... Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Filters
