7,500-lb Capacity. Heavy duty air springs support rear suspension for safety and stability when hauling your heaviest loads. Springs reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 2,000-lb axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 2-3/8" diameter axle Typical 3,500-lb axle U-bolt dimensions Inner width: 2-7/16" Length: 5-1/2" Diameter: 1/2"
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Keeps trailer deck height the same while increasing ground clearance Standard-height spindle is built in Includes idler hubs with bearings, races, and seals Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (with hubs) Weight capacity: 2,000 lbs Bolt pattern: 5 on 4-1/2" Bolt hole diameter: 1/2" Suspension travel: 2-7/16" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: 195/75R14 or smaller Wheel diameter: 16" or smaller Bearings (included) Inner: L44649 Outer: L44649 Races (included) Inner: L44610 Outer: L44610 Seal: 10-9 (included) Inner diameter: 1.500" Outer diameter: 1.987" Note: This Axle-Less system requires crossbeam support.
Get more clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Keeps trailer deck height the same while increasing ground clearance Standard-height spindle is built in Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (without hubs) Weight capacity: 2,000 lbs Brake flange configuration: 4 bolt Bolt hole diameter: 1/2" Suspension travel: 2-7/16" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: ST205/75R15 or smaller Wheel diameter: 14" or smaller This assumes a wheel with zero offset Bearings (sold separately) Inner: L68149 Outer: L44649 Races (sold separately) Inner: L68111 Outer: L44610 Seal: 10-19 (sold separately) Inner diameter: 1.719" Outer diameter: 2.565" Note: This Axle-Less system requires crossbeam support.
Get more clearance and a smoother ride when towing with Axle-Less suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width and idler hubs.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Spindles accept idler hubs Keeps trailer deck height the same while increasing ground clearance Standard-height spindle is built in Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (without hubs) Weight capacity: 2,000 lbs Bolt hole diameter: 1/2" Suspension travel: 2-7/16" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: ST195/75R14 or smaller Wheel diameter: 14" or smaller This assumes a wheel with zero offset Bearings (sold separately) Inner: L44649 Outer: L44649 Races (sold separately) Inner: L44610 Outer: L44610 Seal: 10-9 (sold separately) Inner diameter: 1.500" Outer diameter: 1.987" Note: This Axle-Less system requires crossbeam support.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 2,000-lb axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Specs Application: Application: 2,000-lb axles with BTR spindles Compatible with: Standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Dimensions: Actual drum dimensions: 7-5/8" diameter diameter x 2-7/16" wide Works with: 7" brake assembly Grease cap flange diameter: 1.988" Bolt Pattern and Studs: Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Weight and Capacity: Weight capacity: 1,000 lbs Warranty: Limited warranty: 1-year Bearing, Race, and Seal Information: Bearings (included): Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included): Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining Bolt Pattern Count the lug holes Look at the wheel hub or the back of the wheel and count how many lug holes there are (also called bolt holes) Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug 2a.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 2,000-lb axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.Features: Delivers a smooth, stable, quiet ride - regardless of load size Jounce springs absorb road shock and support trailer's load Rebound springs minimize body roll, rattle, and bottoming out Built-in camber and toe-in reduce wear on your trailer's tires Units work independently - what affects one side of your trailer won't affect the other Eliminates axle beam to increase ground clearance and fit any trailer frame width System replaces 1 trailer axle and suspension components 2 Separate units bolt directly to your trailer's frame Designed for your on-road adventures Strong steel construction is built to last Black powder coat resists rust and corrosion Keeps trailer deck height the same while increasing ground clearance Standard-height spindle is built in Includes idler hubs with bearings, races, and seals Allows for simple bearing maintenance with built-in grease zerks Specs: Application: single- and tandem-axle trailers that use regular tires Tandem-axle trailers require 2 complete systems Not recommended for triple-axle trailers Quantity: 2 suspension units (with hubs) Weight capacity: 2,000 lbs Bolt pattern: 4 on 4" Bolt hole diameter: 1/2" Suspension travel: 2-7/16" 3-Year limited warranty Tire, Wheel, and Hub Compatibility Tire size: 195/75R14 or smaller Wheel diameter: 16" or smaller Bearings (included) Inner: L44649 Outer: L44649 Races (included) Inner: L44610 Outer: L44610 Seal: 10-9 (included) Inner diameter: 1.500" Outer diameter: 1.987" Note: This Axle-Less system requires crossbeam support.
... This universal steel bracket mounts your air spring to the axle and is compatible with air spring kits 2625 and 2716.Features: Replacement axle bracket for Firestone Ride-Rite air helper spring kits Compatible with kits 2625 and 2716 Universal design supports multiple vehicle applications Heavy-duty steel construction holds up under load Corrosion-resistant finish protects against rust Specs: Material: High-strength steel Finish: Corrosion-resistant coating Mount location: Axle Application: Firestone Ride-Rite air spring kits Fits: Firestone Ride-Rite Air Spring Kit 2625 Firestone Ride-Rite Air Spring Kit 2716
... This OEM bracket restores proper mounting support and is used in Ride-Rite kits 2625 and 2716.Features: Direct replacement lower bracket for lost or damaged hardware on your Ride-Rite system OEM Firestone component ensures correct fit and mounting geometry Supports proper air spring alignment and load-carrying performance Designed for Ford F250, F350, and F450 trucks using Firestone Ride-Rite kits 2625 or 2716 Fits: Firestone Ride-Rite Kit: 2625 Firestone Ride-Rite Kit: 2716
Replaces a lost or damaged flat head cap screw on your Firestone Ride-Rite air helper springs (2625 and 2716). Includes 1 flat head cap screw.Features: Replaces a lost or damaged flat head cap screw on your Firestone Ride-Rite air helper springs (2625 and 2716) Includes (1) 3/8 - 16 x 2-1/2" flat head cap screw Fits: Firestone Ride-Rite air helper springs: 2625 and 2716
Replaces 1 lower bracket from your Firestone Ride-Rite RED Label air helper spring kit (W217602625 and W217602716). This direct replacement restores secure mounting for the air springs on your Ford F250, F350, or F450.Features: Replaces the lower bracket for your Firestone Ride-Rite RED Label air helper spring kit (2625 and 2716) Includes 1 lower bracket Fits: Firestone Ride-Rite Red Label air helper spring kit: W217602625 (2625) and W217602716 (2716)
Replaces 1 short support bracket from your Firestone Ride-Rite RED Label air helper spring kit (W217602625 and W217602716). This direct replacement restores secure mounting for the air springs on your Ford F250, F350, or F450.Features: Replaces the short support bracket for your Firestone Ride-Rite RED Label air helper spring kit (2625 and 2716) Includes 1 short support bracket Fits: Firestone Ride-Rite Red Label air helper spring kit: W217602625 (2625) and W217602716 (2716)
Replaces 1 support bracket from your Firestone Ride-Rite RED Label air helper spring kit (W217602625 and W217602716). This direct replacement restores secure mounting for the air springs on your Ford F250, F350, or F450.Features: Replaces the support bracket for your Firestone Ride-Rite RED Label air helper spring kit (2625 and 2716) Includes 1 support bracket Fits: Firestone Ride-Rite Red Label air helper spring kit: W217602625 (2625) and W217602716 (2716)
Replace a lost or damaged 3/8"-16 x 2" flat head cap screw used in Firestone Ride-Rite air helper spring systems. This OEM fastener restores proper mounting strength and ensures a secure, flush fit in your air spring hardware.Features: Direct replacement 3/8"-16 x 2" flat head cap screw for lost or damaged hardware OEM Firestone component for correct fit and reliable performance Flat head seats flush into countersunk mounting points Used in multiple Firestone Ride-Rite rear air helper spring kits Fits: Firestone Ride-Rite Kit: 2625 Firestone Ride-Rite Kit: 2716 Firestone Ride-Rite Kit: 2889 Firestone Ride-Rite Kit: 2890 Firestone Ride-Rite Kit: 2536
Filters
