Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…
view full answer...The ability to use the etrailer Replacement RV Dinette Tabletop #e97RR is really going to rely on the supports that you use and the amount of weight placed on it. If your legs are collapsible and don't support the table top when in the…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…
view full answer...The Replacement Table Leg Kit for etrailer RV Dinette Tables part #e69RR is made of steel and has a black painted finish. It's designed for use indoors but the painted finish would provide protection from the elements if used outdoors.…
view full answer...Technically since the Reese Pro Round Bar Weight Distribution w Sway Control #RE94FR doesn't have that old school friction sway control bar, like what we see with part #17200, you can back up but only in a straight line. Realistically…
view full answer...The hitch ball angle adjustment on weight distribution systems is designed to provide more or less distribution of the tongue weight on your trailer hitch to the trailer and vehicle axles. If you adjust the ball angle farther away from the towing…
view full answer...The B&W Continuum Weight Distribution System #BW28FR currently just comes with the 1 shank and it offers a 3-1/2" drop according to my contact at B&W. Currently they don't offer a shank with a larger drop but it may…
view full answer...The B&W Continuum Weight Distribution System #BW28FR works to reduce sway from occurring by distributing the tongue weight evenly across your vehicle. It does not have a physical sway prevention like a Friction Sway Bar #17200 or other…
view full answer...I reached out to B&W, who said the distance was 11-3/8 inches from the hitch pin hole to the center of the hitch ball on the B&W Continuum Weight Distribution System #BW28FR.
view full answer...Since you already have the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW1000 I would not recommend buying a new one to go with your Grand Design Imagine 2970rl. The tongue weight range on that Blue Ox is 750-1,000 lbs so…
view full answer...The Blue Ox weight distribution systems are sold only with shanks so you'd need to go with the #BXW1503 and then get a 2-1/2 inch shank separately like the Curt #C17131. The Curt shanks fit directly to the Blue Ox systems since they are made…
view full answer...Husky has 2 different types of weight distribution shanks. One of them uses 3/4 inch diameter holes spaced 1-1/4 inches apart on center. If that is what you have then the Curt shank #C17124 will work. But if the shank you have has a smaller hole…
view full answer...Filter Your Search
Contact and Help