Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Bearing Buddies, #BB2047, are pressed into the hub for a tight fit. To determine the correct part for your trailer hub you will need to measure the diameter of the grease cap mating surface in the hub and match that as closely as possible to the…
view full answer...In regards to the Curt Trailer Hitch Receiver part #C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other…
view full answer...This is a common problem and it has to do with how you are currently connected to the Echo. You need go into your settings on your phone and make sure you disconnect the Bluetooth from the Curt Echo item #C51180. Then go to the Curt app and pair the…
view full answer...You are correct, in 2014 VPG changed their name to Mobility Ventures and started to produce the MV-1 again. The Curt Trailer Hitch Receiver - Custom Fit - Class III #C13122 you were looking at is confirmed to fit the 2011-2012 VPG MV-1 and 2014-2018…
view full answer...While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…
view full answer...We don't carry the 2x2 inch square axle in that length. We carry the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which is the comparable round axle which will work just fine. You simply will use the…
view full answer...Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…
view full answer...For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…
view full answer...There's no safe way to actually increase the towing capacity of a vehicle. There's things that can help a vehicle tow it's current capacity safer like suspension enhancement like the SumoSprings part #CSS-1125R which will reduce…
view full answer...Filters
- 2 results
Related Searches