This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Auto-latch allows for easy hookup. 3.5K pin weight.To calculate correct pin weight for Gen-Y hitches, use this formula: GVWR x 0.22 Because the Gen-Y Hitch Executive is shorter than the Lippert Turning Point pin box, the clearance between your trailer and tow vehicle during turns might be reduced.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs. It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs. It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight.
Upgrade your RV kitchen with this stainless steel combination air fryer and convection microwave. Save space by mounting in a cabinet and includes a stainless trim kit for a seamless look. Enjoy cooking healthy meals wherever your journey takes you.Features: Microwave has built-in convection oven and air fryer Air fryer has 9 preset options that vary with time and weight Convection cooking has 10 temperature settings to bake and brown foods Touch control panel has a control lock to prevent accidental use LED display shows the timer, clock, and other activated functions Removable metal shelf gives 2 levels of space for convection and combination cooking Stylish stainless steel compliments most interiors and is corrosion-resistant Durable, vibration-resistant steel construction withstands the bumping and jostling of RV travel Compact in-cabinet mounting saves space on your counter Included trim panel offers a seamless, finished look Specs: Dimensions: Overall: 20-1/2" wide x 12-7/8" tall x 20" deep Cutout width: 22-1/2" minimum Capacity: 1.0 cu ft Output power: 1000 watts Power consumption: Microwave: 1,500 watts Convection: 1,450 watts Grill: 1150 watts Voltage: 120V/60Hz Weight: 42.4 lbs 2-Year warranty
Upgrade your RV kitchen with this black combination air fryer and convection microwave. Saves space by mounting in a cabinet and includes a black trim kit for a seamless look. Enjoy cooking healthy meals wherever the road takes you.Features: Microwave has built-in convection oven and air fryer Air fryer has 9 preset options that vary with time and weight Convection cooking has 10 temperature settings to bake and brown foods Touch control panel has a control lock to prevent accidental use LED display shows the timer, clock, and other activated functions Removable metal shelf gives 2 levels of space for convection and combination cooking Stylish black compliments most interiors Durable, vibration-resistant steel construction withstands the bumping and jostling of RV travel Compact in-cabinet mounting saves space on your counter Included trim panel offers a seamless, finished look Specs: Dimensions: Overall: 20-1/2" wide x 12-7/8" tall x 20" deep Cutout width: 22-1/2" minimum Capacity: 1.0 cu ft Output power: 1000 watts Power consumption: Microwave: 1,500 watts Convection: 1,450 watts Grill: 1150 watts Voltage: 120V/60Hz Weight: 42.4 lbs 2-Year warranty
1,500-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Changes your RV battery's DC output into clean AC power.Features: 1,500-Watt industrial inverter provides AC power for electronics and appliances Uses DC power coming from your RVs battery bank Pure sine wave technology replicates household AC power, allowing you to run devices safely Perfect for sensitive electronics like HDTVs and computers LED indicators show input voltage level, output load level, and fault conditions Multiple connection points let you secure cables and external devices to the inverter Includes 2 GFCI AC outlets, DC input terminals, and remote port Built-in safety features protect your RV's electrical system Fixed-mount remote (sold separately) lets you monitor and control the inverter inside your RV Fuse block installation kit (sold separately) lets you safely connect the inverter to your RV battery Specs: Application: 12V battery systems Rated power: Running (rated) power output: 1,500 watts Starting (surge) power output: 2,650 watts Voltage: Maximum power: 12V DC Input: 10.5 - 16.5 VDC Output: 100 - 120 VAC Temperature ranges: Operating range: -4 F to 104 F Storage range: -22 F to 158 F Maximum wire gauge: #2 AWG Dimensions: 16-9/16" long x 9-3/4" wide x 3-1/4" tall Weight: 9.13 lbs 2-Year warranty This 12V inverter changes DC output from your RV batteries into AC power so you can plug in tools and appliances.
This electric marine winch is designed for horizontal pulling applications. The compact size makes it perfect for mounting on your boat trailer. Includes 20' strap with snap hook, hand-held remote, and free-wheel clutch for manual strap payout.Features: Electric marine winch lets you pull your boat onto your trailer Perfect for watercraft up to 4,000 lbs Compact design - fits most trailer winch stands Mounting hardware sold separately Mounting plate (sold separately) may be required for installation on your trailer winch stand Angle mount (sold separately) may be required for proper winch alignment with your boat's bow 0.47-hp, DC Motor delivers smooth and safe line pulling 12-Volt solenoid transmits power from your vehicle's battery to the winch motor 5/8" Socket wrench (sold separately) lets you operate winch if battery power fails Spur gear system is easy on your vehicle's battery and generates little heat Plastic, hand-held remote lets you operate the winch up to 10' away Rocker switch powers the load in Free-wheel knob lets you release load without power Rotate knob toward Freewheel indicator for smooth, controlled load payout 2" Wide polyester strap is strong and abrasion resistant 20' Long strap includes zinc-plated steel hook Durable plastic housing protects internal components from rain, dust, and debris Made in the USA Specs: Rated line pull: 1,500 lbs Motor: 12-volt DC Line speed at full load: Full reel: 8 FPM Empty reel: 4-1/2 FPM Line speed at no load: Full reel: 22 FPM Empty reel: 11 FPM Power draw at full load: 40 amps Winch should be used intermittently - maximum continuous run time is 3 minutes Gear ratio: 324:1 Strap dimensions: 20' long x 2" wide Winch dimensions: 10-13/16" long x 8-1/2" wide x 8-1/8" tall Wiring harness length: Positive lead: 25' Negative lead: 8' Maximum run time: 4 minutes Weight: 20 lbs 2-Year limited warranty
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Vehicle Fits Make Model Chevy Colorado, Silverado Dodge Ram Ford F150, F250, F350, F450, F550 GMC Canyon, Sierra Honda Ridgeline Nissan Frontier, Titan Ram 1500, 2500, 3500, 4500, 5500 Toyota Tacoma, Tundra
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock, reduce chucking, and help protect your truck and trailer from unnecessary wear and tear.
1,500-watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Built-in automatic transfer switch changes to shore power when available.Features: 1,500-Watt inverter provides AC power for electronics and appliances Changes your battery's DC output into AC power and sends it to the RV's electrical system Pure sine wave technology replicates household AC power, allowing you to run devices safely Perfect for sensitive electronics like HDTVs and computers Integrated transfer switch automatically changes from inverter to shore power when you hook up at the campground LED indicators show input voltage level, output load level, and fault conditions Multiple connection points let you secure cables and external devices to the inverter Includes AC input and output terminals, DC input terminals, and remote port Built-in safety features protect your RV's electrical system Fixed-mount remote (sold separately) lets you monitor and control the inverter from inside your RV Fuse block installation kit (sold separately) lets you safely connect the inverter to your RV battery Specs: Application: 12V battery systems Rated power: Running (rated) power output: 1,500 watts Starting (surge) power output: 2,400 watts Voltage: Maximum power: 12V DC Input: 10 - 16 VDC Output: 100 - 120 VAC Transfer switch power: 20 amps Temperature ranges: Operating range: -4 F to 104 F Storage range: -22 F to 158 F Maximum wire gauge: #1 AWG Dimensions: 13-7/8" long x 11-1/4" wide x 5-1/16" tall Weight: 12.13 lbs 2-Year warranty This 12V inverter with built-in transfer switch changes DC output from your RV batteries into AC power and sends it to the electrical system.
Take the strain out of loading and unloading your boat with this electric winch, featuring a power-in switch and a freewheel-out clutch. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation.Features: Power-in switch to reel in strap Freewheel-out clutch - allows strap to be removed by hand Control knob engages gears or releases load Positive mechanical braking 12-Volt, DC powered Polyester strap and snap hook included Wiring harness included 25' Positive battery wire and 8' ground wire Removable plastic plug for emergency handle use Accepts 5/8" deep socket Requires ratchet to serve as crank handle Enables use of winch in the event of power failure Heat-treated gears provide smoother, quieter ride and greater strength Precision needle bearings in high-load areas Create low friction and promote longer life Die-formed base is adapted for quick-mounting applications High-impact, weather-resistant case Provides excellent protection for internal components Brushed stainless steel front plate for superior rust resistance Made in the USA Specs: Load capacity: 1,500 lbs (see below for more info) Up to 4,000 lb boat Rating based on 6' pull Current draw: 40 amps at 12 volts Winch should be used intermittently - maximum continuous run time is 3 minutes Gear ratio: 324:1 Strap dimensions: 2" wide x 20' long Load speed (in feet per minute): No Load/Full Reel: 22 Full Load/Full Reel: 8.2 2-Year limited warranty Determining Your Load Capacity A common ratio for determining your winch load capacity is 2:1.
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Vehicle Fits Make Model Chevy Colorado, Silverado Dodge Ram Ford F150, F250, F350, F450, F550 GMC Canyon, Sierra Honda Ridgeline Nissan Frontier, Titan Ram 1500, 2500, 3500, 4500, 5500 Toyota Tacoma, Tundra
Now you can easily use your hitch-mounted accessories without having to take off your ball mount! This hitch features a robust, powder coated steel double-sided tow ball and a built-in 2" receiver for your bike rack or cargo carrier.Features: Ball mount with included hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Built-in receiver lets you use hitch accessories without removing the ball mount Works with a bike rack, hitch mounted cargo rack, or another hitch mounted accessory Not to be used with recovery products or any type of hitch Pop in the included rubber plug to keep grime out when receiver's not in use Stowable design lets you store the balls and mounting platform underneath your vehicle Remove dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, flip ball platform, and reinsert pins High-strength steel resists corrosion thanks to black powder coat SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Diameter hitch ball: 22,000 lbs 2" Diameter hitch ball: 10,000 lbs Maximum tongue weight: 1,500 lbs Distance from center of hitch pin hole to center of hitch ball: Pin hole closest to ball: 8-1/2" Pin hole farthest from ball: 9-3/4" Maximum drop: 6" Maximum rise: 7" Incremental height adjustment: 1" Limited lifetime warranty Note: The built-in receiver on this hitch is for accessories only.
Protect your trailer's bearings with these 2.446" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in fit installs easily. Designed for 12" x 2" Dexter hubs with 4-, 5-, or 6-bolt patterns. Includes 2 caps.Material Gauge Flange Diameter (A) Crown Height (B) Flange Length (C) Overall Height (D) 1500 Series F001520 22 2.446" 1.03" 0.313" 1.34"
When you leave the dock or step away from the slip, you want to know rising water will be handled. This 1,200 GPH Sahara Mk2 automatic pump activates as levels increase and keeps discharge steady in tight compartments.Specs Performance and Electrical: Flow rate: 1,200 GPH Rated voltage: 12V DC Recommended fuse: 6 amps Outlet and Installation: Outlet type: 1" (25 mm) and 1-1/8" (28 mm) barbs Rotating outlet elbow: 360-degree orientation Universal mounting pattern Exterior mounting feet One-hand cartridge release Certifications, Standards and Listings: Marine electrical wiring standards: ABYC E-11, ISO 10133, U.S. Coast Guard Rule 33 CFR 183.425 Bilge pump standards: ABYC H-22, ISO 8849, ISO 15083 Ignition protection standards: ABYC C-1500, ISO 8846 Marine, U.S. Coast Guard Rule 33 CFR 183.410 Approvals: NMMA approved listing, CE, RCM, UKCA Warranty: 3-Year
Light-duty winch with 1-hp, permanent magnet motor lets you quickly and safely recover a stuck ATV. Sealed design ensures winch operates in any environment. Dual brakes offer reliable load holding. Handlebar rocker switch included.Features: ATV recovery winch is designed for recreation and light-duty work applications Perfect for 350cc - 500cc sport quads and small utility quad 4x4s Recommended for ATVs with a maximum GVW of 1,500 lbs 1-hp, Permanent magnet motor delivers fast and safe line pulling Motor is lighter and uses less current than a series-wound motor Sealed to keep water out and prevent internal corrosion Sealed and submersible 250-amp contactor transmits power from vehicle battery to winch motor Water- and weather-resistant to IP68 specifications Mounts with included hardware under ATV's front cover or hood Automatic mechanical and dynamic brakes ensure reliable load holding Mechanical spring brake creates resistance on drum to stop rotation and hold the load Dynamic brake uses resistance from motor to stop drum rotation All-steel, 3-stage planetary gear train Provides increased drum speed when compared with worm drives and 1- or 2-stage planetary gear trains Rocker switch lets you control the winch from the seat of your ATV Switch mounts to handlebar with included hardware Wireless remote control (CU881286 - sold separately) available Free-spooling clutch ensures fast rope payout and reduces wear on the motor 3/16" Diameter Dyneema SK75 synthetic rope is strong as steel yet lightweight and safer to handle 50' Long with 6' woven polyester protective sleeve 1/4" Steel hook and nylon hand-saver strap included Heavy-duty, CNC machined billet aluminum hawse fairlead Rounded fairlead hole helps prevent friction damage to rope Black anodized finish resists corrosion Mounting plate (sold separately) may be required to mount winch and fairlead to your ATV Durable, gray powder coated steel body and motor resist corrosion Tie-bars and side frames help to create a strong and rigid winch body Specs: Rated line pull (with a single layer of synthetic rope around the drum): 3,000 lbs (static load) Maximum recommended ATV GVW : 1,500 lbs Motor: 12-volt DC Line pull at 0 lbs: Power draw: 25 amps Line speed: 22-3/16 FPM Line pull at 3,000 lbs: Power draw: 230 amps Line speed: 6-11/16 FPM Gear ratio: 138:1 Duty cycle: S3 5% (approximately 44 seconds on/14 minutes off) Braking: 100-percent load-holding mechanical and dynamic Battery lead wire: 6 gauge Battery lead length: 6' Rope dimensions: 50' long x 3/16" (4.8 mm) diameter Winch dimensions: 12-13/16" long x 4-1/2" wide x 4-11/16" tall Drum dimensions: 2-3/16" diameter x 3" long Hawse fairlead opening: 3-1/4" wide (82 mm) Distance between hawse fairlead mounting holes (center to center): 4-7/8" Winch weight (with synthetic rope installed): 15.9 lbs Recommended battery size (for maximum power): 550 CCA Warranty: Limited lifetime on mechanical components 1-Year on electrical components This Cub 3s ATV recovery winch is designed for light-duty work and recreational applications.
Attach a bike rack, cargo carrier, or other hitch-mounted accessory to your vehicle with this receiver. Specially designed to complement the MINI body style. Offers more ground clearance than a traditional hitch. Fast, easy, no-drill installation.
Keep your devices charged no matter where you are with this 200-watt monocrystalline solar panel. Flexible fold-points help you shape the panels for charging or storage. High Power Port cable and USB port let you charge Yeti power stations and more.
4-1/8" Long, 3-diode, underwater light bolsters the aesthetic of your boat by emitting bright blue light underneath your boat. Works great for attracting fish to your boat. Stainless steel cover.
Go Power has updated its popular inverter to be more compact and more efficient. PowerTrak compatibility allows you to monitor and control your electrical system in one place. Powers up to 1,500 watts at once with pure sine wave current.Features: 1,500-Watt inverter provides AC power for electronics and appliances Changes your battery's DC output into AC power and sends it to the RV's electrical system Pure sine wave technology replicates household AC power, allowing you to run devices safely Perfect for sensitive electronics like HDTVs and computers Multiple connection points let you secure cables and external devices to the inverter Includes GCFI AC output terminal, DC input terminals, and remote port Built-in safety features protect against short circuits, overload, or extreme temperatures PowerTrak Screen compatible for monitoring and configuring power settings (sold separately) Compatible with multiplex systems Allows connection via Bluetooth to monitor status on your smart device Fuse block installation kit (sold separately) lets you safely connect the inverter to your RV battery Specs: Application: 12V battery systems Rated power: Running (rated) power output: 1,500 watts Starting (surge) power output: 3,000 watts Voltage: Input: 10.5 - 16.5 VDC Output: 100 - 120 VAC Temperature ranges: Operating range: -4 F to 104 F Storage range: -22 F to 158 F Dimensions: 15-1/8" long x 9 wide x 4-1/8" tall Weight: 16.2 lbs 2-Year warranty What is the Go Power PowerTrak System?
Filters
