1993 Dodge Grand Caravan Salt Spreader

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

That's because the hitches for the 2023 Santa Fe fit all models including the hybrids. The best one for your 2023 Hyundai Santa Fe Hybrid is the etrailer Hitch item #e28AR. This hitch is custom fit and bolts directly to your Hyundai with…

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at…

Hi Dana; the Timbren #TFR250SDJ are 6-7/8" tall including the mounting bracket. I see you went ahead and ordered the #TFRTT350J instead. Just a heads up, this is the severe service kit so it is designed for a constant heavy load like a…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The Bulldog 182513 is an old part which is no longer available. Based on our records, the Bulldog 182513 was a 10,000 lb square weld on side wind jack with 12-3/4" lift. It measured 26-3/4" retracted and 39-1/2" extended.…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking…

The SumoSprings Solo Custom Helper Springs #SSR-127-54 has a maximum capacity of 2,800 pounds as opposed to the SumoSprings Rebel Custom Helper Springs #SSR-129-40-2 maximum capacity of 2,600 pounds. Also, the design is a bit different. Where the…

If you wanted a similar rack to carry 2 boards the Inno Board Locker part #INA744 would be a great option but the Curt you mentioned can only carry one board at a time.