Search: weigh safe   >   Ball Mounts   >   !Cruze  x   >   Convert-A-Ball  x   >  

for my weigh safe tongue weight scale ball to mount on. I need an adjustable ball mount for my weigh | What is the platform...

The Weigh Safe Stainless Steel Hitch Ball with Built-In Scale # WSUN-1 requires that the ball mount | I purchased your ball with bilt in scale,it does not fit...

Mount # LTB6-25. Reason being Andersen does not make a ball mount for the larger 2-1/2 inch hitch size | Im trying to decided between the anderson rapid 6inch hitch with 2 1/2inch shank or...

I'm not certain what you mean by 'car weight'. The Draw-Tite # 2923 ball mount has a 7500 lb towing | Im moving from fl to nj and wanted to load my car with a few things. How much car weight should I limit it...

Id like to use the Convert A BALL mount AMSC12 along with the Weigh Safe 2inch and 2-5/16inch | Id like to use the Convert A BALL mount AMSC12 along with the Weigh Safe 2inch...

ball mount without the scale in this capacity range with an adjustable 10 inch drop and 2 inch shank | If I use the 10inch , the bottom ball would be about 6inch from the ground. Do you make a single ball instead...

ball mount out there that accept the tow pin. I was wanting to go with the Weigh Safe but they use | I have 2017 F150 w/ 6inch lift and picking up a Patriot Camper X1 that...

I am interested in a convertable hitch ball like the Weigh Safe 2inch and 2-5/16inch Hitch Ball | I am interested in a convertable hitch ball like the Weigh Safe 2inch and 2-5/16inch...

using in my front hitch installed on my F-150 truck. Cushioned Ball Mount for 2inch Hitches - 10-3/4 | Can this product be safely used in a 2inch receiver upside down? I need heighth not drop . I am using in...

The Cushioned Ball Mount # AMSC12 that you referenced would be perfect for you all things | I have a 32foot RV with a hitch capacity of 5000 pounds and a tongue weight of 500 pounds. The hitch is mounted underneath...

mount. trailers weigh about 2K and 3.5K. Two questions - for equivalent ball height Curt Rockerball | I would like to add shock absorption to my hitch setup. I tow with a 2 ball/1 shank...

Cushioned ball mounts like the Convert-A-Ball # AMSC2 are rated for trailer weights up to 10,000 | Is the cushioned ball hitch a worthwhile investment for a small utility trailer weighing around...

and trailer that weigh a total of 12k. I attached a review video for this ball mount for you to check out also | I have a 2012 GMC 2500 HD Pickup with 2.5inch Receiver. Pulling a 32inch sport...

. Then for a ball mount it sounds like you have an 8 inch rise which isn't quite tall enough. We have a couple | I have a 2016 scamp 16foot just purchased a 2013 Mitsubishi Outlander had hitch and brake activator...

# . Cant find my order number, but you fixed me up with the approp SUbaru ball mount part, last July. I | it says needs 1 1/2 inches to attach to the shank, i only have about 1 inch. I have a draw-tite hitch...

, so there won't be any difference in the cushioning ability of either ball mount. Since you have | Is there a difference in the cushion portion of the hitch between the standard and HD model? I see there...

Yes, you can use either piece of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, # CAB-UM | Can the horizontal part of the hitch the part that slides into the tow vehicles receiver,...

. There really is not a maximum length of a ball mount that is considered safe. You will need to consider | how do u figure ball mount length? what is the maximum ball mount length to maintain...

some cushioning inside the shank that smooths out the ride. Both of these ball mounts take a hitch | Would you recommend a mount with a 4 inch to pull a standard 12 ft. utility trailer? | The Draw-Tite #...

The Adjustable Ball Mount for 2" Hitches part # TK5007 offers up to a 9" rise and a 10-1/4" drop | Hi, I have a Jayco 184bs baja edition with a GVWR of 4,000 lbs. I tow it with a 2010 Tundra and a 2019 4runner....

be totally safe. The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount # CAB-UM has a 5,000 lb weight | The CAB-UM is rated for 5000 lb. My trailer is 5000 lb max. Will...

The hole in your Class II ball mount/draw bar cannot be enlarged without possibly reducing | Hi, I am trying to use a tow ball with a 2inch rise in with my 1 1/4inch hitch. However, I can only find 2inch balls...

How much tolerance is allowable for safe towing if a ball mount and ball will not exactly match | How much tolerance is allowable for safe towing if a ball mount and ball will...

- be it the vehicle, hitch, ball mount, hitch ball etc. So is it safe to think I will lose 1/6 of tow capacity if I | Hello, I read a note quoted below Note: Use of any ball...