Search: skyline tower   >  

The Yakima SightLine Towers #Y64AR and RidgeLine Towers #Y00145 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks #Y07204 is hidden behind the outer cover on the SightLine…

If you'll be damaging the adapter then you definitely need the Replacement Adapter and Seat #8880639. Then to replace that screw you mentioned you need the Replacement Pitch Adjustment Bolts #8880615. This comes with 4 of the bolts that you…

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

To install a set of Yakima Jetstream crossbars to a Skyline tower you do need the adapter part #8880637.

Yes, the tracks themselves recreate the factory C-shaped rack tracks. Thule Tracks #THTP42 and Yakima Tracks #Y01126 have the same C-channel design, but differ in length and how they mount to the vehicle. To use your SkyLine Towers #Y53TR with these…

In order to power the third brake light on a truck bed cap you will need the Pacer Performance 3rd Brake Light Logic Module part #PP20-702. The reason you need the module is that the brake/turn signal circuits and trailer lighting circuits are…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

I would be happy to help you find a cross bar system and tonneau cover for your 2022 Ford F-250 with the 6-3/4' bed. There is not a round bar system though but I have two great options for you that will work with a tonneau cover. The correct…

The part you referenced, Replacement Yakima Q Tower without Cam Cover Assembly #Y8880048, is an appropriate replacement part for the current generation of the Q-Tower. It is not compatible with the older version according to my contact at Yakima. You…

I spoke with my contact at Yakima and he informed me that the Q Towers, like #Y8880048, have had a design change that occurred a couple of years ago. Despite this change the older cam cover assembly will fit the newer tower. My contact also stated…

It sounds like you are looking for the Replacement Yakima Q Tower without Cam Cover Assembly #Y8880048. This is the portion of the Q-tower that comes with the swivel portion of the tower below it. The landing pad fits below this and is the portion…