Search: lippert components   >  

Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…

The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000lbs #LC672136 has 9" round feet so you would need the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4…

Installation of a replacement pin box like the Lippert 1621 5th Wheel Pin Box - 18,000 lbs #LC1191151 does not raise the overall height of a 5th wheel trailer, but it may give more adjustability to the height of the king pin. I've attached…

It sounds like you are heading in the right direction. To decide where your springs seat will be you will need to mock up your trailer as if you were installing all of the equipment on it. Once you have the suspension part mocked up you will want to…

To replace the Level Up controller on your 2012 Dutchmen Infinity 3750FL you need the Replacement OneControl Advantage Controller #LC88TF. I confirmed this is what you're needing with my contact at Lippert!

The US-made Lippert #LC364262 Replacement Motor with Brake for In-Wall RV Slide-Out carries a 1 year warranty.

No, Solera and Dometic awning components are not compatible with each other so the Replacement Support Arm Assembly for Solera Flat RV Awnings #LC281154 you referenced would not match up with the head of your Dometic awning. You would either have to…

The best option is to use a 30 amp surge protector like the Camco RV Power Defender Circuit Analyzer Dogbone #CAM55312, but if you really wanted to use the 50 amp surge protector #SU99SR you'll just need to use the: -Mighty Cord RV Power Cord…

Yes, it's very common that most campsites only offer 30 amp service and you would not have an issue still using your SurgeMinder Surge Protector and Circuit Tester - 50 Amps #SU99SR to protect the trailer along with an adapter to connect to the…

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system. This is the touch pad "controller" but if you are looking…

I found some dimensions for the Apollo AAC24OTRB and found that it is height 12.0 in, width 20.6 inches and depth 20.5 inches. While we don't have anything that matches that exactly the closest option we have would be the Furrion part #FMSN09BL…