Result: f2022

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

Thanks for reaching out, Nathen! Yes, the TorkLift Tie Downs #TL63PR will fit your 2024 Ford F-350 with the running boards and factory hitch that you referenced. Be sure to pick up some turnbuckles if you don't already have some. I really like…

HappiJac hasn't really developed a great solution for licking their turnbuckles yet. There are some options, but it also depends on what HappiJac turnbuckles that you have. If you have the HappiJac Qwik-Load Turnbuckles #LC182895, you would just…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Since you need a larger extension than normal for the bumper-mounted camper tie-downs on your Ram, the TorkLift FastGun Turnbuckles #TLS9522-2-LK that you referenced will work well (for both the front and rear). These have a reach of 25" to…

According to my research, the 2004 Lance Lite 915 Truck Bed Camper is 17' 6" long therefore you would want to use the Camco UltraGuard Slide-In Camper Cover part #CAM45770 which will work with your ladder and solar panels. The Camco…

The Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are meant for campers only up to 8' so you wouldn't be able to safely tie down your 2019 Arctic Fox Model 865 Truckbed Camper. Instead I recommend the HappiJac Truck-Mounted Camper…

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

The 6-pole sockets that we carry can only handle up to 12 gauge wire so the only way to really swap away from Lance's proprietary connector would be to treat it like a standard camper and switch to a junction box and 7-way connector like parts…

The four bolt brake mounting flange for 8,000 lb trailer axles is going to be more or less an industry standard. This industry standard is 3-5/8" across left to right on center and 3-7/16" top to bottom on center. This could very well vary…

I wish there was an easy solution I can recommend but Air Lift will void your warranty if you run lower than 5 psi in the bags and the compressor kit won't let you do that anyway. 5 psi SHOULDN'T make it unbearably stiff so I'd hate to…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…