This bracket provides a sturdy place to attach your electrical connector mounting bracket (sold separately). Designed for use with 4-way, 5-way, and 6-way connector brackets. Included hose clamp ... Features: Bracket can be used with any of the following mounting brackets to make a no-drill mount for your trailer connector: Mounting Bracket 4-Pole Flat (18144) Mounting Bracket for 4-, 5
Trailer wiring adapter changes the 4 pole flat on your vehicle into a 5 pole flat.Features: Length of harness: 20" Length of blue wire: 60" The blue wire gets spliced into the reverse light wire on the vehicle which is easily done with the included quick splice wire
Features: Designed for use with Wesbar 5-pole flat vehicle end trailer connector Works with #20036 (4-pole to 5-pole adapter) and #20016 (vehicle end 5 pole flat connector) Self tapping screws
Adapter converts from 4 pole wiring on vehicle to 7 pole round plug Additional wire leads for brake, power and accessory are 12" long Mounting bracket (18138) is sold separately
You do not need to remove the heat shield to install the Curt Trailer Hitch Receiver #C13427 on your 2021 Hyundai Palisade. Based on the picture you provided it looks like the hitch is pretty close to the heat shield, but you can use the handle end…
The Autowbrake brake controller part #3430001 that you referenced draws up to 15 amps. It's only going to draw amperage when the controller is activating the trailer brake so it would not be something you'd need to install an on/off switch on…
In order to use your reverse lights as utility lights you would have to have a separate 12 volt power wire running to the lights. You would need a switch and you would need diodes to prevent back feeding. You would need to run some wire from the 12…
To answer your first question, there isn't a traditional "adapter" to allow the 7 way on your trailer to plug into a 4 way connector on your vehicle- at least not in the manner that you're thinking of. For that reason you would…
I can't tell you specifically how a wiring harness you purchased from a competitor will install. The harnesses we offer for a 1994 Ford Ranger, the T-One Vehicle Wiring Harness #118325, Curt T-Connector #C55325 and Hopkins Plug-In Simple Vehicle…
Thank you for the photo of your 1998 Eddie Bauer Explorer's trailer wiring harness cap. Between the age of the plastic material and the exposure to road grime (that might be trapped in the gaps, making cap removal as difficult as possible) I am…
Between the Curt Class III Trailer Hitch #C13416 and the EcoHitch #306-X7396 for your 2019 Toyota RAV4 the EcoHitch will provide slightly better ground clearance but it is going to require some trimming on the rear fascia to allow room for the…
Filter Results
