Result: 1779

We have the bearing part #1779 and the race part #1729. We also have the race part #2729 and the bearing #2788. Since I am not able to determine what seal you need based on your numbers I'd need you to get me the diameter of the spindle where the…

In order to find the correct grease seal to use with bearing #2788 you would need to use a digital caliper such as #PTW80157 to measure the inner and outer diameter of your current grease seal to the thousandths of an inch. Bearing #2788 is often…

It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part #1779 and inner bearing of part #2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779 or…

I recommend installing the etrailer Trailer Hitch Receiver #e28ZR on your 2022 Ram 1500 because of the matte black finish. This finish helps the hitch blend in and look like a part of your truck plus it's better at hiding scratches from road…

Bearing #2788 has an inner diameter of 1.50-inches and fits race #2729. Bearing #1779 has an inner diameter of 0.938-inches and fits race #1729. We do offer all of these bearing and race parts and if you wish you can install new bearings in your…

So after quite a bit of research it seems that the Trostel 300-156-6 seals you mentioned are quite old and have not been around for some time. The best I could find was that they are 3.00" in outer diameter, and I did manage to find a customer…

I have attached a diagram that shows how to wire a brake controller from scratch. If your truck did not come with a 7-way trailer connector, then you will also need to use the Installation Kit, #ETBC7. Your 1998 Chevrolet Pick up will not have a…

I have a solution for you but we do not have any standard grease caps with a 2.24" diameter like the #RG04-020 . I recommend going with the Bearing Buddy Bearing Protectors #BB2240 which will not only protect your bearings but provide an easy,…

We carry grease caps that fit a 2.08 diameter hub bore. Unfortunately, we do not carry dust caps with that diameter. The grease caps I recommend are Bearing Buddy, part #BB2080SS for non threaded hubs, and part #BB2080T-SS for hub bores that are 2.08…

What you'll need to install like our best selling P3 part #90195 in your 2007 Dodge Ram with a 4-way is the install harness part #3020-P and the #37185. Brake (blue) wire does not run all the way back to the 4-pole at the rear; it stops at the…

You may not even need load resistors to switch to LED lights. The best thing to do is to try the lights without load resistors first. No need to purchase something you may not need until you know need it. Load resistors such as #DI34ZR dissipate heat…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…