Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Lisa, So while I wouldn't' be able to tell you the exact drop you need for your ball mount when towing with your 2019 Toyota Highlander, but I can tell you how to determine the right one. It's actually really easy as you just need to…
view full answer...I wish there was a plug and play harness that would allow you to install a Tekonsha brake controller but it looks like you are going to have to hardwire a brake controller to your 2012 Nissan NV. The first thing you will need is a 4-way if you do not…
view full answer...Since you do not have a tow package on your 2020 Ford Transit T250 you'd need to first start with a 4-way trailer wiring connector with the part #118643 and then you'd need to use the part #ETBC7 to convert it to a 7-way and wire in a brake…
view full answer...We have the low profile, semi-recessed Glantastic LED RV Puck Light, #328-K-58L34P9. You do not mention what the dimensions are on your current Jupiter lights, I searched online and from what I was able to find think they may be a similar 4-1/4"…
view full answer...Hey Mike thanks for your question. The T-Connectors, like the Curt #C56327 you mentioned require a line to be run to the battery to power the converter. The converter basically serves to protect the wiring on your vehicle. It is circuit-protected,…
view full answer...For your 2020 Ford Transit 250, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56327 for your trailer wiring. The 6-pin connector you referenced is not the correct harness for your trailer wiring. I recommend this…
view full answer...I did some research on the engine compartment of your 2016 Ford Transit 150 and there are actually a couple of ways you can install the Curt T-Connector Vehicle Wiring Harness #C56327. The installation video you referenced where the side wall panels…
view full answer...There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…
view full answer...All you have to do is route an air line to the back of the Buyers Products 50 Ton 10-Hole Air Compensated Pintle Hook with Air Chamber and Plunger #337PH55AC. You do not need to install any other type of switch or exhaust. I attached a picture where…
view full answer...To connect to the RetraxPRO XR tonneau cover T-Slots you'll want the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 along with the Tonneau Cover Adapter Kit for Yakima OverHaul HD #Y01155. These adapters will connect to the feet…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire B&W Companion #BWRVK3775.…
view full answer...Disc brakes are constantly dragging on the rotor although with minimal drag when you aren't hitting the brakes or in this case applying pressure to the coupler to engage the pad pressure. They will run hotter than the non-braking hubs for sure.…
view full answer...Filter Your Search
Contact and Help