Stainless Steel Putco Tailgate Cap for a 2000 Chevy S-10
Why does comment say not confirmed to fit S-10 pick-up? | The Stainless Steel Putco Tailgate Cap # P51610P that you referenced is for a 1967 - 1972 GM pickup. For your 2000 Chevy S-10 you need the Stainless Steel Putco Tailgate Cap # P51622P...
Replacement Velcro For Truxedo Tonneau Cover On 2002 Chevrolet S-10 With 4-1/2 Ft Bed
need new velcro strips for Truxedo cover. Im confused about where to measure width. The velcro measures an inch, but the channel seems to be 1 5/16. 2002 S10 LS, but the cover was purchased and installed in 2007. Sounds like this is just what...
Trailer Hitch Recommendation for 2001 Chevy S-10 with Factory Step Bumper
Heya, Looking at the bottom of my step bumper I dont see how this will attach properly. The step bumper appears to be hollow on the bottom, rather than a flat stock and has tabs extending down at angles with holes in them, presumably for bolting...
Base Plate Kit Recommendation for Flat Towing a 2001 Chevy S-10 4 Wheel Drive
Have a 2001 Chevy S-10 pickup 4x4, is there base plates available? | We do carry base plates for the 4 wheel drive models of the 2001 Chevy S-10 as long as they aren't the ZR2 or Xtreme models. For that you would want the part # 165-2. In addition...
Curt Trailer Hitches that Fit 1998 Chevy S-10
My tow hitch part #13020. I need to know if it will fit a 1998 Chevy s10 | For your 1998 Chevy S-10 we have Curt hitches that fit like the # C13021 which fits models with the factory step bumper and the part # 13920 which fits models with...
Is Drilling Required for the Front Hitch on a 2001 Chevrolet S-10 ZR2
So just to confirm, this front hitch will bolt on no issues? | Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65004 is a confirmed fit for your 2001 Chevrolet S-10 ZR2. If you have the factory tow hooks then no-drilling will be...
Can Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, # PK11700, Accept 10 Gauge Wire
Do you make the male/female Heavy Duty trailer plug that will take a 10 guage wire in all of its holes? | The Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector - Trailer End, # PK11700, can accept 8 to 16 gauge wire so you could...
Towing Bumper Recommendation for a 2001 Chevy S-10
dear customer service I have a 2001 S10 STEP SIDE pickup and need to have a towing ball bumper. do you have one that replaces the factory bumper, as I do not want to install a hitch if I can help it. something like the 1500 bumper, etc thank...
What Prevents HyperFlashing of Trailer Turn Signals When Converting to LED Blinkers
I have an aluminum flatbed on my pickup. The taillights/brake lights are 6inch oval incandescent. If I switch to LED do I need to install resistors to avoid rapid flashing? | Yes, when switching to LED taillights on a vehicle that will be...
Flat Towing Parts Needed for a 1997 Chevy S-10
Hi, I have a 1997 Chevy s10, manual, rear wheel drive. I was wondering you have the necessary items so I can flat tow it behind my RV. Thanks | We have exactly what you would need. First you will need to start with a base plate kit. For that...
Can the Rapid Switch Pro HD Truck Bed Ladder Rack Carry a Roof Top Tent
Im wondering if this can be used with a rooftop tent. | Yes. The Rapid Switch Systems Pro HD Truck Bed Ladder Rack for Compact Trucks - 800 lbs # RS48FR has an 800-lbs capacity, so it's going to be well suited to handling a roof top tent. |
Is the Vision X Headlight Conversion Kit # VX-46 Sold in Pairs or Individually
are this sold as a pair or each light is sold individually? | The Vision X Headlight Conversion Kit # VX-46 that you referenced is sold in pairs. |
Bulb Style Replacement for 1997 Chevy S-10
Will these fit a 1997 chevy s10 v6 4.3 L and does the 9007Light bulb produce high and low beam? | Your 1997 Chevy S-10 uses 9005 bulb style and not the 9007. I attached a link to see all of what would fit your truck. The part # CM93413 would...
Trailer Brake Controller Installation on 2000 Chevy S-10
I’m looking at the tekancha Voyager for a 2000 S1 pickup. Does the S10 have a factory wiring connection for this unit or will I have to make splices or connections? | Your 2000 Chevy S-10 is not prewired for a brake controller, but that's not...
Does WeatherTech Side Window Air Deflectors # WT80018 Touch Window Glass
It is unclear in the video, but do these visors WT80018 sit directly against the glass, where they could scratch the glass over time? I like the low profile, but dont want to scratch the top portion of my windows and possibly obstruct vision!...
Do You Carry a Custom-Fit Truck Mat for My 1999 Chevy S-10 with a 6-Ft. Bed?
do you have one to fit my truck | I have a solution for you. Unfortunately, we do not carry customized bed mats to fit your 1999 Chevy S-10 6-ft. bed. However, we do have a BedRug Universal Truck Bed Mat - Bed Floor Cover for Trucks with Drop-In...
What is the Length of Wire that Comes from the LED Step/Area Light
A photo shows light with a probable plastic or rubber harness cover covering the black and white wires until the wires are exposed How long is the black harness and wires You may want to update web page Thanks | I pulled a LED Step/Area Light...
Base Plates, Tow Bar, Wiring, Safety Cables, and Braking System to Flat Tow a 2000 Chevy S-10
towing a 00 LS s10 with a 2005 jeep grand cherokee, what do I need | The first thing you will need are base plates on the 2000 Chevy S-10 LS. There are several options available depending on if the truck has 2 wheel drive or 4 wheel drive....
Which Trailer Hitch Fits 2003 Chevrolet S10 Sportside
What is the difference in a non towing bumper and a roll pan bumper in regards to hitch fit? | Since you have a 2003 Chevy S10 Sportside the correct hitch you need is the # 75085. A roll pan bumper is totally smooth and basically doesn't stick...
Can 2000 Chevrolet S-10 Extreme Pickup Be Flat-Towed
What parts will I need to tow a 2000 s-10 p/u extreme on all 4 with a stowmaster 5000 tow bar ie wiring harness base plates | I did some research and found that the manual for the 2000 Chevrolet S-10 pickup states that the vehicle is not to...
Will The Pro Series Standard Brake Winch, # PSKR15000301, Work To Pull A 12 Foot Boat Into A Garage
I use a winch to pull my 12 foot boat into the garage using a winch with a 50 foot 3/16 cable. The slope to pull the boat up is only about 5 degrees and maybe a bit more. It takes two to push it into the garage. The problem with the winch that...
Wiring A 3rd Brake Light On A Truck Cap On A 2002 Chevrolet S-10
what is the best way to wire brake light on truck cap to a 2002 chevy S10 pickup ? | You have a couple of places you can look for the center high mount stop light (CHMSL) circuit on your 2002 Chevrolet S-10. First, if you have a trailer connector...
Trailer Hitch for a 1996 Chevy S-10 with Roll Pan Bumper
Need hitch for 1996 Chevy s-10 with roll pan. | We do have a trailer hitch for your 1996 Chevy S-10 with the roll pan bumper. it is Curt hitch # 13920. I have included a link to the installation instructions for you. If you plan on doing some...
Difference Between Curt and Tow Ready T-Connector Wiring Harness with 4-Pole Flat Trailer Connector
hi wanted to know whats the deference in the two trailer wire sets curt t c55359 and the t one 118350 are they other name brand or work deferent on there | Both 4-pole wiring harnesses available for your 2000 Chevrolet S-10 Pickup, Curt # C55359,...
Filter Your Search
Contact and Help